• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.59-62
• /
• 1998

Thermal treatment dependences of MFS devices in $BaMgF_4$ on Si structures have been investigated. $BaMgF_4$ thin films have been directly deposited on the p-Si(100) wafers at a low temperature of $300^{\circ}$ in an ultra high vacuum(UHV) system. After in-situ post-deposition annealing was conducted for 20 s at $650^{\circ}$, bias and temperature were applied to $BaMgF_4/Si$ structures. Although X-ray diffraction analysis showed that the films were polycrystalline in nature before and after bias temperature, the C-V properties were some different between with and without bias-temperature treatment.

• 전자공학회논문지A
• /
• 제29A권9호
• /
• pp.29-35
• /
• 1992

Dielectric thin film of N/O (Si$_{3}N_[4}/SIO_{2}$) for high density stacked dynamic-RAM cell was formed by LPCVD and oxidation(Dry & pyrogenic oxidation methods) of the top Si$_{3}N_[4}$ film. The thickness, structure and composition of this film were measured by ellipsometer, high frequency C-V meter, high resolution TEM, AES, and SIMS. The thickness limit of Si$_{3}N_[4}$ film in making thin N/O structure layer was 7nm. In this experiment, the film with thinner than 7nm was not thick enough as oxygen diffusion barrier, and oxygen punched through the film and interfacial oxidation occurred at the phase boundary between Si$_{3}N_[4}$ and polycrystalline silicon electrode.

• 반도체디스플레이기술학회지
• /
• 제19권2호
• /
• pp.72-76
• /
• 2020

The author demonstrated organic ferroelectric thin-film transistors with ferroelectric materials of P(VDF-TrFE) and an amorphous oxide semiconducting In-Ga-Zn-O channel on the silicon substrates. The organic ferroelectric layers were deposited on an oxide semiconductor layer by Langmuir-Blodgett method and then annealed at 128℃ for 30min. The carrier mobility and current on/off ratio of the memory transistors showed 9 ㎠V^-1s^-1 and 6 orders of magnitude, respectively. We can conclude from the obtained results that proposed memory transistors were quite suitable to realize flexible and werable electronic applications.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.747-750
• /
• 2000

In this work, we investigated the dependence of optical and electrical properties of amorphous hydrogenated SiC (a-SiC:H) films on annealing temperature(T$\sub$a/). The a-SiC:H films were deposited by PECVD(plasma enhanced vapor deposition) on coming glass, p-type Si(100) wafer using SiH$_4$+CH$_4$+N$_2$gas mixture. The experimental results have shown that the optical energy band gap(E$\sub$g/) of the a-SiC thin films unchanged in the range of T$\sub$a/ from 400$^{\circ}C$ to 600$^{\circ}C$. The Raman spectrum of the thin films, annealed at high temperatures, has shown that graphitization of carbon clusters and micro-crystalline silicon occurs. The current-voltage characteristics have shown good electrical properties at the annealed films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.525-528
• /
• 2001

ZnO:Al thin film can be used as a transparent conducting oxide(TCO) which has low electric resistivity and high optical transmittance for the front electrode of amorphous silicon solar cells and display devices. This study of electrical, crystallographic and optical properties of Al doped ZnO thin films prepared by Facing Targets Sputtering (FTS), where strong internal magnets were contained in target holders to confine the plasma between the targets, is described. Optimal transmittance and resistivity was obtained by controlling flow rate of O$_2$ gas and substrate temperature. When the of gas rate of 0.3 and substrate temperature 200$^{\circ}C$ , ZnO:Al thin film had strongly oriented c-axis and lower resistivity(<10$\^$-4/Ω-cm).

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.287-290
• /
• 2000

We give pressure stimulation into organic thin films and then manufacture a device under the accumulation condition that the state surface pressure is 20[mN/m]. LB layers of Arac. acid deposited by LB method were deposited onto y-type silicon wafer as x, y, z-type film. In processing of a device manufacture, we can see the process is good from the change of a surface pressure for organic thin films and transfer ratio of area per molecule. The structure of manufactured device is Au/arachidic acid/Al, the number of accumulated layers. Also, we then examined of the MIM device by means of I-V. The I-V characteristic of the device is measured from 0 to +2[V].

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3328-3330
• /
• 1999

In this paper, the fabrication of a micro actuator with a micro electromagnet and an actuator diaphragm is presented. The micro electromagnet consists of a magnetic core and a micro inductive planar coil. The actuator diaphragm is the p+ silicon diaphragm on both sides of which magnetostrictive materials are deposited by sputtering. The micro electromagnet is fabricated by sputtering, evaporating, etching and electroplating. The magnetic flux density of the micro electromagnet is measured by using the gauss meter. The deflection of the actuator diaphragm is measured by using the laser vibrometer and optic microscope.

• 전기학회논문지
• /
• 제56권8호
• /
• pp.1455-1460
• /
• 2007

This paper reports the piezoelectric microspeakers that are audible in open air with high quality piezoelectric AlN thin film deposited onto Mo/Ti electrode. This successful achievement, compared to the previous results, is followed by manipulating two material properties: the one is to use a compressively stressed silicon nitride film as a supporting diaphragm (even tensile stressed, around +20 MPa) and the another is to use high quality AlN thin film with compressive residual stress (less than -100 MPa). With these materials, the Sound Pressure Level (SPL) of the fabricated micro speakers shows more than 60 dB from 100 Hz to 15 kHz and the highest SPL is about 100 dB at 9.3 kHz with 20 Vpeak-to-peak sinusoidal input and with 10 mm distances from the fabricated micro speakers to the reference microphone (B&K Type 2669 & 4192L).

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2002년도 추계종합학술대회
• /
• pp.477-480
• /
• 2002

ULSI(ultra large scaled integrated circuits)의 고집적화와 고속화를 위한 다층 배선 기술 중에서 층간 절연막의 특성을 향상시켜주는 것은 매우 중요한 요소이다. 소자의 소형화에 따른 절연층의 용량에 의한 신호의 지연을 방지하고 금속배선간의 상호간섭을 막아주기 위해서 현재 요구되는 0.13$\mu\textrm{m}$급 소자의 경우에서는 유전율이 매우 낮은 k$\leq$2.0인 층간 절연막이 필요하게 된다. 이러한 차세대 반도체 소자의 층간 절연물질로서 사용될 유력한 저유전 물질로 Nanoporous silica(k=1.3~2.5)를 적용하려는 연구가 진행되고 있다(1)-(3). 그러한 물질 중에 하나가 organosilicate films이 있는데 carbon-doped oxides, silicon-oxicarbides, carbon-incorporated silicon oxide film, organic-inorganic hybrid type Si-O-C thin films 혹은 organic-inorganic hybrid silica materials 등으로 불린다. 이에 본 연구에서는 nano-pore를 갖는 유무기 하이브리드 구조의 저유전 박막을 BTMSM/O$_2$의 혼합된 precursor를 사용하여 ICPCVD 방법에 의해 형성하였다. 총 유량을 20sccm이 되도록 하여 $O_2$:BTMSM(Ar)의 유량비를 변화시키며, 작업진공도는 300mTorr였다. 기판은 가열하지 않고, p-type Si(100) 위에 Si-O-C-H 박막을 형성하였다. 열적안정성을 조사하기 위하여 30$0^{\circ}C$, 40$0^{\circ}C$, 50$0^{\circ}C$에서 30분간 열처리하여 비교 분석하였다. 형성된 박막의 특성은 XPS로 분석하여 유전상수와의 상관관계를 조사하였다.

• 한국정보통신학회논문지
• /
• 제8권7호
• /
• pp.1448-1452
• /
• 2004

비정질실리콘은 빛을 받으면 자유전자와 자유정공이 무수히 발생하여 전류 또는 전압의 형태로 나타나는 광전변환 재료이다. 이를 광다이오드로 사용하기 위해서는 금속 박막(Thin film)과 결합하여 쇼트키 다이오드로 만드는 기술이 효과적이다. 본 연구에서는 광다이오드의 신뢰성 및 특성을 개선하기 위하여 크롬실리사이드를 기존의 방식과 달리 하부 전극으로 크롬금속 박막을 증착한 후 그 위에 사일렌(SiH4)가스를 사용해서 PECVD (Plasma Enhanced Chemical Vapor Deposition) 진공 증착장비로 최적의 비정질실리콘 박막을 얇게 (100$\AA$) 만들어 열처리를 통하여 크롬실리사이드 박막을 형성 한 후 광다이오드 소자를 제조한다. 이렇게 형성된 크롬실리사이드 광 다이오드를 사용하여 암전류와 광전류를 측정찬 결과 기존의 방식보다 우수한 성능이 나타났고, 공정도 단순화 할 수 있었으며 그리고 신뢰성도 개선되었다.