• 한국세라믹학회지
• /
• 제45권8호
• /
• pp.486-492
• /
• 2008

Reaction bonded silicon carbide(RBSC) composite for heat-exchanger was fabricated by molten Si infiltration method. The raw materials with variable particle sizes were used in this experience. The finer the particle size in sintered silicon carbide was the more increasing 3-point bending strength and fracture toughness. As the adaptable particle sizes had been occupied interstice arising from packing sample, the mechanical properties were increased. In the PCS1-1 sample, the 3-point bending strength and fracture toughness were 323MPa and $4.9\;MPa{\cdot}m^{1/2}$, respectively.

• Carbon letters
• /
• 제15권3호
• /
• pp.180-186
• /
• 2014

This study highlights a novel method and mechanism for the rapid and effective milling of carbon fibers (CFs) in silicon carbide (SiC) powder, and also the dispersion of CFs in SiC powder. The composite powders were prepared by chopping and exfoliation of CFs, and ball milling of CFs and SiC powder in isopropyl alcohol. A wide range of CFs loading, from 10 to 50 vol%, was studied. The milling of CFs and SiC powder was checked by measuring the average particle size of the composite powders. The dispersivity of CFs in SiC powder was checked through scanning electron microscope. The results show that the usage of exfoliated CF tows resulted in a rapid and effective milling of CFs and SiC powder. The results further show an excellent dispersion of CFs in SiC powder for all CFs loading without any dispersing agent.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.534-539
• /
• 2009

Reaction Bonded Silicon Carbide(RBSC) has been used for engineering ceramics due to low-temperature fabrication and near-net shape products with excellent structural properties such as thermal shock resistance, corrosion resistance and mechanical strength. Recently, attempts have been made to develop hot gas filter with gradient pore structure by RBSC to overcome weakness of commercial clay-bonded SiC filter such as low fracture toughness and low reliability. In this study a fabrication process of porous RBSC with multi-layer pore structure with gradient pore size was developed. The support layer of the RBSC with multi-layer pore structure was fabricated by conventional Si infiltration process. The intermediate and filter layers consisted of phenolic resin and fine SiC powder were prepared by dip-coating of the support RBSC in slurry of SiC and phenol resin. The temperature of $1550^{\circ}C$ to make Si left in RBSC support layer infiltrate into dip-coated layer to produce SiC by reacting with pyro-carbon from phenol resin.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.520-524
• /
• 2009

Porous self-bonded silicon carbide (SBSC) ceramics were fabricated at temperatures ranging from 1750 to $1850^{\circ}C$ using SiC, Si, C as starting materials and Al as an optional sintering additive. The effect of Al addition on the porosity and strength of the porous SBSC ceramics were investigated as functions of sintering temperature and Si:C ratio. The porosity increased with decreasing the Si:C ratio and increasing the sintering temperature. It was possible to fabricate SBSC ceramics with porosities ranging from 37% to 44% by adjusting the Si:C ratio and the sintering temperature. Addition of Al additive promoted densification and necking between SiC grains, resulting in improved strength. Typical flexural strengths of SBSC ceramics with and without Al addition were 44 MPa and 34MPa, respectively.

• Carbon letters
• /
• 제1권1호
• /
• pp.12-16
• /
• 2000

Carbon fiber was reacted with gaseous silicon monoxide which is produced from pack-powder mixture at elevated temperature. As a result of the reaction, two kinds of SiC fiber were obtained. The first one was SiC fibers which were converted from carbon fiber. The fiber is constituted with polycrystal like fine grains or monolithic crystals that have a size from sub-micron to $10\;{\mu}m$. Their size depends on the temperature during the conversion reaction. The second one was ultra-fine SiC fibers that were found on the surface of the converted SiC fibers. The ultra-fine fibers have diameters from 0.08 to $0.2\;{\mu}m$ and their aspect ratio were larger than 100. The chemical composit ion of the ultra-fine fibers was analyzed using an Auger electron spectroscopy. In result, the fibers consist of 51% silicon, 38% carbon and 11% oxygen by weight.

• 한국주조공학회지
• /
• 제29권6호
• /
• pp.257-264
• /
• 2009

The effects of silicon and molybdenum on the temperature-dependent properties of high silicon and high molybdenum ductile cast iron were investigated. Microstructure was composed of ferrite, cell boundary complex carbide, carbide precipitated in the grain and graphite. The number and size of carbide decreased with the increase of silicon content and increased with the increase of molybdenum content, however, the size of cell boundary carbide increased above 0.81wt%Mo. The room temperature tensile strength increased with the increase of silicon and molybdenum contents. That did not increase with the latter with more than 0.8wt%. Meanwhile the high temperature tensile strength showed the similar trend to that of room temperature one, that of the specimen with 0.55wt%Mo was the highest. The $A_1$ transformation temperature increased with the silicon and molybdenum contents, and showed similar tendency with the variation of strength. It was discussed due to the solubility limit of Molybdenum in ferrite, of which value was assumed to be in the vicinity of 0.81wt%Mo. The weight after oxidation at 1,173K showed the result caused by the difference in solubility of molybdenum in the matrix. That and the thickness change after oxidation did not show any consistent trend with the silicon and molybdenum contents.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 춘계학술발표대회
• /
• pp.53.1-53.1
• /
• 2009

실리콘 다층박막 태양전지를 위한 초고효율 실리콘 양자점 박막을 연구하기 위해 Silicon target과 Carbon target을 동시에 스퍼터하여 Silicon Carbide 박막을 증착하였다. Silicon Carbide 박막의 조성비는 target에 인가되는 RF Power를 조절하여 Auger Electro Spectroscopy를 사용하여 Si, C, O, N원소의 양을 정량화하여 측정하였다. Si Power를 200W에 고정하고, C Power를 0W에서 400W까지 변화시킬 때, $Si_{1-x}$ $C_x$ 박막에서 조성비 x는 0 ~ 0.43 범위였다. 이 박막을 증착 한 후에 질소 분위기에서 600 ~ $1000^{\circ}C$ 온도로 열처리를 진행하였다. High resolution TEM과 Raman 분석을 통해, 박막의 열처리 후 $Si_{1-x}$ $C_x$ 박막 내에 실리콘 양자점이 형성되었음을 관찰할 수 있었고, 2 ~ 10 nm 의 크기를 가지는 것으로 확인할 수 있었다. 이 실리콘 양자점을 포함한 $Si_{1-x}$ $C_x$ 박막을 적층하여 UV-VIS-NIR spectroscopy, FTIR및 PL와 같은 측정을 통해 광학적 에너지 밴드갭의 변화와 그에 따른 특성을 확인하였다.

• 한국결정성장학회지
• /
• 제29권2호
• /
• pp.45-49
• /
• 2019

본 연구에서는, 탄소성분으로서 탄화왕겨, 제지슬러지, 커피찌꺼기와 실리카 분말로부터, 비교적 미세한 탄화규소 결정질 응집체를 합성하였다. 탄소성분들과 실리카의 혼합물로부터 탄화규소 응집체를 얻기 위한 주요 반응물질은 열탄화환원 반응에 의해 생성된 일산화규소 기체로 추정되었다. 탄화왕겨, 제지슬러지, 커피찌꺼기와 실리카 분말의 혼합물로부터 열탄화환원반응법을 거쳐 생성된 탄화규소 결정질 응집체들에 대한 XRD 회절패턴으로부터 결정상을 분석하였고, FE-SEM과 FE-TEM을 통한 미세구조, 결정구조 분석이 이루어졌다. 탄화왕겨, 제지슬러지, 그리고 실리카 분말의 시료의 경우, XRD 분석에서는 $35^{\circ}$ 부근의 (111) peak은 비교적 높은 강도를 나타내었다. 탄화왕겨, 제지슬러지, 커피찌꺼기와 실리카 분말의 혼합물로부터 합성된 시료들에 대해 FE-SEM 관찰을 통하여 $1{\mu}m$ 이하의 미세입자들을 관찰하였으며, TEM 측정 결과에서는 탄화규소 결정질상의 (110) 회절패턴들을 확인하였다.

• 한국세라믹학회지
• /
• 제46권5호
• /
• pp.515-519
• /
• 2009

Carbon layers were fabricated on silicon carbide by chlorination reaction at temperatures between $1000^{\circ}C$ and $1500^{\circ}C$ with $Cl_2/H_2$ gas mixtures. The effect of reaction temperature on the micro-structures and tribological behavior of SiC derived carbon layer was investigated. Tribological tests were carried out ball-on-disk type wear tester. Carbon layers were characterized by X-ray diffractometer, Raman spectroscopy and surface profilometer. Both friction coefficients and wear rates were maintained low values at reaction temperature up to $1300^{\circ}C$ but increased suddenly above this temperature. Variation of surface roughness as a function of reaction temperature was dominant factor affecting tribological transition behavior of carbon layer derived from silicon carbide at high temperature.

• Nuclear Engineering and Technology
• /
• 제55권10호
• /
• pp.3725-3731
• /
• 2023

Thorium dioxide (ThO₂)-silicon carbide (SiC) composite fuel pellets were fabricated via the spark plasma-sintering (SPS) method to investigate the role of the addition of SiC in enhancing the thermal conductivity of ThO₂ fuel. SiC particles with an average size of 1㎛ in 10 and 15 vol% were used to manufacture the composite pellets. The changes in the composites' densification, microstructure and thermal conductivity were explored by comparing them with pure ThO₂ pellets. The structural and microstructural characterization of the composite pellets has revealed that SPS could manufacture high-quality composite pellets without having any reaction products or intermetallic. The density measurement by the Archimedes principles and the grain size from the electron back-scattered diffraction (EBSD) analysis has indicated that the composites have higher densities and smaller grain sizes than the pellets without SiC addition. Finally, thermal conductivity as a function of temperature has revealed that sintered ThO₂-SiC composites showed an increase of up to 56% in thermal conductivity compared to pristine ThO₂ pellets.