• 대한기계학회논문집B
• /
• 제37권9호
• /
• pp.823-828
• /
• 2013

실리콘 태양전지의 두께를 줄일 경우 여러 문제점이 발생하게 되는데 그 중에서 태양전지의 휨 현상은 제품 수율의 직접적인 원인이 되어 제품 상용화에 가장 큰 걸림돌이 되고 있다. 본 연구에서는 태양전지의 실리콘 웨이퍼 두께를 가변하였을 때의 휨 정도에 대해 정밀하게 측정하고자 하였다. 측정결과의 신뢰성을 높이고 비 대칭성 형상에 대해 자세하고 정밀하게 분석하기 위해 3D 이미지 스캐너를 사용하였다. 그 결과 실리콘 웨이퍼의 두께가 감소할수록 휨 정도는 급격하게 증가하고 곡률 또한 증가하는 것을 확인할 수 있었다. 실리콘 웨이퍼의 두께가 감소할 수록 휨 정도의 편차가 증가하여 형상의 비 대칭성이 증가하는 것 또한 확인되었다. 또한 Ag 전극의 부착이 휨 현상을 어느 정도 감소시키는 것을 알 수 있었다.

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.25-27
• /
• 2017

Nanoscale textured black silicon has attracted intensive attention due to its great potential as applications in multicrystalline silicon-based solar cells. It absorbs sunlight over a broad range of wavelengths but introduces large recombination centers, non-uniform doping into cell. In this study, we present a metal-assisted chemical etching technique plus alkaline etching process to fabricate nanoscale pyramid structures with optimized condition. To make the structures, silver nanoparticles-loaded mc-Si wafer was submerged into $H_2O_2/HF$ solution first for nanohole texturing the wafer and textured wafer etched again with KOH solution for making nanoscale pyramid structures. The average reflectivity (350-1050 nm) is about 8.42% with anti-reflection coating.

• 전기학회논문지
• /
• 제65권10호
• /
• pp.1694-1696
• /
• 2016

Present thin film solar cells with hydrogenated amorphous silicon oxide (a-SiO:H) as an absorber suffer from low fill factor(FF) of 61~64 [%] in spite of its benefits related to high open circuit voltage ($V_{oc}$). Since degraded quality of a-SiO:H absorber by alloying with oxygen can affect the FF, we aimed to achieve high photosensitivity by minimizing $CO_2$ gas addition. Improving optical gap($E_{opt}$) has been attained by strong hydrogen dilution combined with lowering substrate temperature down to 100 [$^{\circ}C$]. Small amount of the $CO_2$ was added in order to disturb microcrystalline formation by high hydrogen dilution. The developed a-SiO:H has high photosensitivity (${\sim}2{\times}10^5$) and high $E_{opt}$ of 1.85 [eV], which contributed to attain remarkable FF of 74 [%] and high $V_{oc}$ (>1 [V]). As a result, high power conversion efficiency of 7.18 [%] was demonstrated by using very thin absorber layer of only 100 [nm], even though we processed all experiment at extremely low temperature of 100 [$^{\circ}C$].

• 한국전기전자재료학회논문지
• /
• 제30권2호
• /
• pp.115-118
• /
• 2017

Highly photosensitive and wide bandgap amorphous silicon oxide (a-$SiO_x$:H) films were developed at low temperature ranges ($100{\sim}150^{\circ}C$) with employing plasma-enhanced chemical vapor deposition by optimizing $H_2/SiH_4$ gas ratio and $CO_2$ flow. Photosensitivity more than $10^5$ and wide bandgap (1.81~1.85 eV) properties were used for making the a-$SiO_x$:H thin film solar cells, which exhibited a high open circuit voltage of 0.987 V at the substrate temperature of $100^{\circ}C$. In addition, a power conversion efficiency of 6.87% for the cell could be improved up to 7.77% by employing a new n-type nc-$SiO_x$:H/ZnO:Al/Ag triple back-reflector that offers better short circuit currents in the thin film photovoltaic devices.

• 대한기계학회논문집A
• /
• 제36권5호
• /
• pp.505-512
• /
• 2012

본 논문에서 태양전지 실리콘 웨이퍼 검사를 위해 광학스캐닝 메커니즘 기반 검사장비를 개발하였다. 그 중에서 다양한 결함검사 요구와 적절한 조명조건을 만족하는 구조적 하이브리드 조명시스템을 설계하였다. 그 다음으로 실험계획법을 이용하여 구조적 하이브리드 조명시스템의 최적 조명조건을 마스터 유리와 실리콘 웨이퍼에서 선정하였다. 마스터 유리에서 최적 조명조건은 B-강, BG-강, BR-강, BGR-강 이며, 실리콘 웨이퍼에서 최적조건은 R-중-B-중 이다. 이 최적조명조건을 적용하여 실리콘 웨이퍼 표면을 검사한 결과, 핀홀, 스크래치, 치핑 등 다수의 표면결함을 정확하게 검출하였다. 구조적 하이브리드 조명시스템은 태양전지 실리콘 웨이퍼 표면결함 검사에 유용하게 사용될 수 있다.

• Current Photovoltaic Research
• /
• 제11권4호
• /
• pp.114-117
• /
• 2023

Transparent Photovoltaic (PV) modules have recently been in the spotlight because they can be applied to buildings and vehicles. However, crystalline silicon (c-Si) solar modules, which account for about 90% of the PV module market, have the disadvantage of applying transparent PV modules due to their unique opacity. Recently, a see-through type PV module using a crystalline silicon solar strap has been developed. However, there is a problem due to a decrease in aesthetics due to the metal ribbon in the center of the see-through type PV module and difficulty bonding the metal ribbon due to the low voltage output of the strap. In this study, to solve this problem, we developed a fabrication process of series connected c-Si solar strap cells using the c-Si solar cells. We succeeded in fabricating a series connected strap with a width of 2-10 mm, and we plan to manufacture an aesthetic see-through type c-Si PV module.

• 한국재료학회지
• /
• 제24권7호
• /
• pp.375-380
• /
• 2014

Solar cells exhibit different power outputs in different climates. In this study, the temperature dependence of open-circuit voltage(V-oc), short-circuit current(I-sc), fill factor(FF) and the efficiency of screen-printed single-crystal silicon solar cells were studied. One group was fabricated with homogeneously-doped emitters and another group was fabricated with selectively-doped emitters. While varying the temperature (25, 40, 60 and $80^{\circ}C$), the current-voltage characteristics of the cells were measured and the leakage currents extracted from the current-voltage curve. As the temperature increased, both the homogeneously-doped and selectively-doped emitters showed a slight increase in I-sc and a rapid degradation of V-oc. The FF and efficiency also decreased as temperature increased in both groups. The temperature coefficient for each factor was calculated. From the current-voltage curve, we found that the main cause of V-oc degradation was an increase in the intrinsic carrier concentration. The temperature coefficients of the two groups were compared, leading to the idea that structural effects could also affect the temperature dependence of current-voltage characteristics.

• 센서학회지
• /
• 제9권1호
• /
• pp.70-75
• /
• 2000

단결정 실리콘웨이퍼를 사용한 태양전지 제조에 있어 가장 큰 문제점은 재료의 높은 가격이다. 본 연구에서는 이러한 문제의 해결방안으로 현재 DRAM 소자 제조과정에서 폐기되는 웨이퍼를 리사이클링하여 태양전지를 제작하고 저가의 제조공정과 전지의 특성을 연구하였다. DRAM용 실리콘 웨이퍼는 비저항이 높고 두꺼워 태양전지 재료로서 부적합하나, 본 연구에서는 후면전계 (Back Surface Field) 형성, 표면 Texturing, 반사 방지막 형성 등의 공정들을 조합하여 효율향상을 위한 최적조건을 찾아내고, 두께변화에 따른 효율변화를 조사하였다. 최적화된 위의 모든 조건들을 적용하였을 때, $4\;cm^2$의 면적, $300\;{\mu}m$ 두께를 가지는 태양전지에서 단락전류밀도 ($J_{sc}$)는 $28\;mA/cm^2$, 개방전압 ($V_{oc}$) 0.51V, 충실도(Fill Factor)면에서는 0.53으로 가장 높은 값을 얻었고, 10% 이상의 효율을 확보할 수 있었다. 이와 같은 방법으로 폐기되는 실리콘 웨이퍼들을 재활용하여 실용성이 큰 저가의 단결정 실리콘 태양전지를 제작할 수 있는 방법을 확보할 수 있었다.

• 한국세라믹학회지
• /
• 제49권6호
• /
• pp.637-641
• /
• 2012

Due to its high production cost and relatively high energy consumption during the Siemens process, poly-silicon makers have been continuously and eagerly sought another silicon route for decades. One candidate that consumes less energy and has a simpler acidic and metallurgical purification procedure is upgraded metallurgical-grade (UMG) silicon. Owing to its low purity, UMG silicon often requires special steps to minimize the impurity effects and to remove or segregate the metal atoms in the bulk and to remove interfacial defects such as precipitates and grain boundaries. A process often called the 'gettering process' is used with phosphorus diffusion in this experiment in an effort to improve the performance of silicon solar cells using UMG silicon. The phosphorous gettering processes were optimized and compared to the standard POCl process so as to increase the minority carrier lifetime(MCLT) with the duration time and temperature as variables. In order to analyze the metal impurity concentration and distribution, secondary ion mass spectroscopy (SIMS) was utilized before and after the phosphorous gettering process.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2009년도 추계학술대회 논문집
• /
• pp.89-92
• /
• 2009

In this paper, We observed degradation of general poly-cristalline silicon solar cell by light and heat. This is very important to define solar cell's characteristics. So we test eight cells that made of poly-cristalline silicon. We expect to the result of this experiment is useful for researching and measuring solar cell's characteristics.