• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.593-597
• /
• 2015

Ni ink for electrohydrodynamic (EHD) continuous jet printing has been developed by using Ni nanoparticles mixed with conhesiveness provider. EHD continuous jet printing was used in order to realize $20{\mu}m$ pattern width. Ink stability was investigated by using Turbi-scan which monitors agglomeration and precipitation of nanoparticles in the ink for three days. The Turbi-scan results showed that the formulated Ni ink had been stable for 3 days without any indication of precipitation across the entire ink. Antireflection coating (ARC) layer in crystalline solar cell wafers was removed by laser ablation technique leading to the formation of 84 grooves where the Ni ink was printed by EHD continuous jet printing. The printability and microstructure of EHD-jet-printed Ni lines were investigated by using optical and electron microscopes. 84 Ni lines with the width less than $20{\mu}m$ were successfully printed by one-time printing without any misalignment and fill the laser-ablated ARC grooves.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.217-221
• /
• 2015

Developing a metallization that has low cost and high efficiency is essential in solar-cell industries, to replace expensive silver-based metallization. Ni/Cu two-step metallization is one way to reduce the cost of solar cells, because the price of copper is about 100 times less than that of silver. Alkaline electroless plating was used for depositing nickel seed layers on the front electrode area. Prior to the nickel deposition process, 2% HF solution was used to remove native oxide, which disturbs uniform nickel plating. In the subsequent step, a nickel sintering process was carried out in $N_2$ gas atmosphere; however, copper was plated by light-induced plating (LIP). Plated nickel has different properties under different bath conditions because nickel electroless plating is a completely chemical process. In this paper, plating bath conditions such as pH and temperature were varied, and the metal layer's structure was analyzed to investigate the adhesion of Ni/Cu metallization. Average adhesion values in the range of 0.2-0.49 N/mm were achieved for samples with no nickel sintering process.

• Current Photovoltaic Research
• /
• 제7권3호
• /
• pp.71-75
• /
• 2019

Solar energy is one of the renewable energy sources. It can respond to expanding energy demand. A solar cell module is designed to have a durability that can be developed over a long period of 25 years to be installed outdoors and perform like a stable power supply. We need Standard Test Condition (STC)-based power output data before and after testing to measure the power output of existing modules. The modules are shown to reduce power output by comparing data before and after outdoor experiments regardless of whether they are indoor or outdoor. It is easy to compare the power output quantities through the module simulator in the indoor. However, it takes a lot of testing time and costs to compare the power output on outdoor in the case of a high number of modules and distance from the module simulator. It can save time and costs if we can check the power output using the data in outdoor. We have used the long-term outdoor test to find the elements out that corresponds to the reductions in power output quantities. We have conducted research that matched the actual and the tests.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.210-216
• /
• 2010

This paper investigates the dependence of a-Si:H/c-Si passivation and heterojunction solar cell performances on various cleaning processes of silicon wafers. It is observed that the passivation quality of a-Si:H thin-films on c-Si wafers depends highly on the initial H-termination properties of the wafer surface. The effective minority carrier lifetime (MCLT) of highly H-terminated wafer is beneficial for obtaining high quality passivation of a-Si:H/c-Si. The wafers passivated by p(n)-doped a-Si:H layers have low MCLT regardless of the initial H-termination quality. On the other hand, the MCLT of wafers incorporating intrinsic (i) a-Si:H as a passivation layer shows sensitive variation with initial cleaning and H-termination schemes. By applying the improved cleaning processes, we can obtain an MCLT of $100{\mu}sec$ after H-termination and above $600{\mu}sec$ after i a-Si:H thin film deposition. By adapting improved cleaning processes and by improving passivation and doped layers, we can fabricate a-Si:H/c-Si heterojunction solar cells with an active area conversion efficiency of 18.42%, which cells have an open circuit voltage of 0.670V, short circuit current of $37.31\;mA/cm^2$ and fill factor of 0.7374. These cells show more than 20% pseudo efficiency measured by Suns-$V_{oc}$ with an elimination of series resistance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.276-276
• /
• 2010

Localized surface plasmon resonance (LSPR) has been explored recently as a promising approach to increase energy conversion efficiency in photovoltaic devices, particularly for thin film hydrogenated amorphous silicon (a-Si:H) solar cells. The LSPR is frequently excited via an electromagnetic (EM) radiation in proximate metallic nanostructures and its primary con sequences are selective photon extinction and local EM enhancement which gives rise to improved photogeneration of electron-hole (e-h) pairs, and consequently increases photocurrent. In this work, high-dielectric-constant (k) $ZrO_2$ (refractive index n=2.22, dielectric constant $\varepsilon=4.93$ at the wavelength of 550 nm) is proposed as spacing layer to enhance the LSPR for application to the thin film silicon solar cells. Compared to excitation of the LSPR using $SiO_2$ (n=1.46, $\varepsilon=2.13$ at the wavelength of 546.1 nm) spacing layer with Au nanoparticles of the radius of 45nm, that using $ZrO_2$ dielectric shows the advantages of(i) ~2.5 times greater polarizability, (ii) ~3.5 times larger scattering cross-section and ~1.5 times larger absorption cross-section, (iii) 4.5% higher transmission coefficient of the same thickness and (iv) 7.8% greater transmitted electric filed intensity at the same depth. All those results are calculated by Mie theory and Fresnel equations, and simulated by finite-difference time-domain (FDTD) calculations with proper boundary conditions. Red-shifting of the LSPR wavelength using high-k $ZrO_2$ dielectric is also observed according to location of the peak and this is consistent with the other's report. Finally, our experimental results show that variation of short-circuit current density ($J_{sc}$) of the LSPR enhanced a-Si:H solar cell by using the $ZrO_2$ spacing layer is 45.4% higher than that using the $SiO_2$ spacing layer, supporting our calculation and theory.

• 대한전자공학회논문지
• /
• 제26권6호
• /
• pp.30-37
• /
• 1989

Silane($SiH_4$), methane($CH_4$), diborane(B_2H_6)그리고 phosphine($PH_3$)을 이용하여 rf글로방전분해법으로 PIN형 a-SiC:H/a-Si:H 이종접합 태양전지를 제작하였다. $SnO_2/ITO$층 형성치 태양전지의 효율은 ITO 투명전극만의 경우보다 1.5% 향상되었다. 제작조건은 P층의 경우 $CH_4/SiH_4$의 비를 5로 하고 두께는 $100{\AA}$이었다. I층은 P층위에 증착하였으나 진성이 아니고 N형에 가깝다. 이 I층을 진성으로 바꾸기 위해서 0.3ppm의 $B_2H_6$를 $SiH_4$에 혼합하여 5000${\AA}$증착했다. 또한 N층은 $PH_4/SiH_4$의 비를 $10^{-2}$로 하여 $400{\AA}$ 증착시켰다. 그 결과 입사강도가 15mW/$cm^2$일 때 개방전압 $V_{oc}=O'$단락전류밀도 $J_{sc=14.6mA/cm^2}$, 충진율 FF=58.2%, 그리고 효율 ${eta}=8.0%$를 나타내었다. 빛의 반사에 의한 손실을 감소시키기 위하여 $MgF_2$를 유리기판위에 도포하였다. 이에 의한 효율은 0.5% 향상되어 전체적인 효율은 8.5%였다.

• 한국진공학회지
• /
• 제22권1호
• /
• pp.13-19
• /
• 2013

건물기능과 디자인을 개선하는 건물일체형 태양전지의 발전 가능성이 높게 평가되고 있다. 현재는 투명 염료감응형 태양전지가 유력한 건물일체형 태양전지 기술로서 개발되고 있는데 박막 공정 기술에 기초하는 Si계 투명 박막 태양전지가 새로운 대안으로서 조명받고 있다. Si계 투명 박막 태양전지에 선택적 투과막을 적용하면 가시광선은 태양전지를 투과하고 적외선은 광 흡수층으로 재반사되기 때문에 변환효율이 향상된다. 본 연구에서는 여러 종류의 박막 증착 기술 중에서 경제성이 높은 스퍼터링 방식을 이용하여 Al-Ti계 산화물 박막을 형성하고 조성에 따른 선택적 투과 특성 변화를 관찰하였다. Al-Ti계 산화물 박막의 투과율 및 반사율은 조성에 따라 크게 변화하였으며 25 nm 두께의 AlTiO 박막에서 선택적 투과 특성이 관찰되었다. 이러한 Al-Ti계 산화물 박막의 광학적 특성을 Si계 박막 태양전지에 응용하면 투명 태양전지 구현 및 변환효율 향상이 가능해 지리라 판단된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.348-348
• /
• 2010

Nanostructures have great potential in various devices due to the their promising electronic and optical properties. Nano-patterned the front surface of a solar cell generally results in improved performance, mostly due to an increase in the short-circuit current by the incident photons strike the cell surface at an angle. In this work, we investigate AFM-assisted nano-patterned field effect transistors (FETs) with vairous silicon oxide distance value D, from ${\sim}0.5{\mu}m$ to $1{\mu}m$. Also, we compared the electro-optical characteristics of the patterned FETs and the non-patterned FETs (reference device) based on both 2-dimensional simulation and experimental results for the wavelength from 100nm to 900nm. In addition, we report electric characteristics for illuminated surface in schottky barrier field effect transistors (SB-FETs).

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.163-163
• /
• 2011

박막태양전지의 가장 큰 문제점인 stablity가 우수한 조건을 찾는 연구가 많이 진행되고 있다. 그 중 i-layer는 박막태양전지의 구조 중 가장 크게 degradation이 일어나는 부분으로 알려져 왔다. 이에 i-layer 부분을 서로 특성이 다른 두 개의 막을 사용함으로써 stability를 향상시키는 방법이 제시되었는데 이 방법을 사용하는 동시에 높은 효율을 확보하기위해 이 실험을 진행하였다. i-layer의 제작 조건을 가변하여 다양한 Bandgap Energy를 가지는 단일막을 확보하였고 이를 ASA simulation을 이용해 cell에 적용하여 높은 효율을 얻고자 하였다. 결과로 i-layer Bandgap Energy를 1.8eV와 1.75eV로 쌓았을 때 최적의 효율과 electric field를 가짐을 확인할 수 있었다. 본 연구를 통해 stability 향상시킨 구조인 double i-layer 박막태양전지에서의 고효율화를 구현해 볼 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.91-91
• /
• 2011

박막태양전지의 높은 효율개선을 위해 TCO층과 p-layer 사이에 buffer layer를 넣어 Voc와 FF를 개선하는 연구가 진행되고 있다. 이에 buffer layer의 활성화 정도를 높이기 위해 p-layer을 최적화 시키고자한다. 이 실험에서 a-Si:B에 N2O를 도핑시켜 Bandgap Energy 2.0 eV, Activation Energy 0.4 eV인 a-SiOx:B 막을 제작하여 buffer layer로 사용하였고 이 buffer layer에 의한 cell의 효율 향상을 최적화 하기위해 ASA simulation을 이용해 p-layer의 Bandgap Energy와 Activation Energy를 가변 하여 보았다. 실험결과 p-layer의 Bandgap Energy 1.95 eV에서 buffer layer와 p-layer사이에서의 barrier가 최소가 됨을 확인 할 수 있었고 Actication Energy 0.5 eV에서 가장 높은 Voc를 가짐을 알 수 있었다. 본 연구를 통해 p-layer의 Bandgap Energy 1.95 eV, Activation Energy 0.5 eV에서 buffer layer를 활성화시키기 위한 p-layer의 최적화 조건을 구현해 볼 수 있었다.