• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
• /
• pp.552-554
• /
• 2004

Barrier ribs of plasma display panel (PDP) are glass matrix composite reinforced with alumina particles. Mechanical properties of the ribs are very crucial for the improvement in reliability of the panel as the ribs might fracture during transportation and service. In this study, therefore, the effects of filler type and content on the mechanical properties of the ribs were investigated. The fillers used include $Al_2O_3$, $TiO_2$, $ZrO_2$ and fused silica. The content of the filler was changed from 0 to 40 vol.%. The mechanical properties of the ribs measured were hardness, Young's modulus, fracture toughness, and 3-point bending modulus. The fracture toughness evaluated by micro-Vicker's indentation of the composites, in general, was measured to increase with the content of the filler until the sintered density does not decrease significantly. The improvement, however, was dependent on the type of filler employed.

• Environmental Engineering Research
• /
• 제10권2호
• /
• pp.54-61
• /
• 2005

Liquid-phase catalytic degradation of waste high-density polyethylene (HDPE) over ZSM-5 (powder type (PW)) and ZSM-5+binder (granule type (GR)) has been investigated with a stirred semi-batch operation at 400°C. Two ZSM-5 catalysts with a different crystal size were synthesized and also each ZSM-5 (25%) Catalyst was mixed with a same binder (kaolin: silica sol: alumina = 55%:10%:10%). The performance of prepared catalysts that has different physicochemical properties was discussed with the cumulative amount distribution, molecular weight distribution and also paraffin, olefin, naphthene and aromatic (PONA) distribution in liquid product. These liquid product quality and distributions were changed depending on the physicochemical properties of the catalyst. Moreover, the characteristic of ZSM-5 in the catalyst was strongly influenced on the activity and PONA distribution in liquid product.

• 동력기계공학회지
• /
• 제10권4호
• /
• pp.133-138
• /
• 2006

Effective thermal conductivity of particulate reinforced composite has been predicted by Eshelby's equivalent inclusion method modified with Mori-Tanaka's mean field theory. The predicted results are compared with the experimental results from the literature. The model composite is polymer matrix filled with ceramic particles such as silica, alumina, and aluminum nitride. The preliminary examination by Eshelby type model shows that the predicted results are in good agreements with the experimental results for the composite with perfect spherical filler. As the shape of filler deviates from the perfect sphere, the predicted error increases. By using the aspect ratio of the filler deduced from the fixed filler volume fraction of 30%, the predicted results coincide well with the experimental results for filler volume fraction of 40% or less. Beyond this fraction, the predicted error increases rapidly. It can be finally concluded from the study that Eshelby type model can be applied to predict the thermal conductivity of the particulate composite with filler volume fraction less than 40%.

• Advances in materials Research
• /
• 제13권2호
• /
• pp.103-114
• /
• 2024

Zeolites are microporous materials that find applications in different fields due to their numerous interesting properties. This research investigated the effect of leaching on unheated Ifon kaolin in dilute hydrochloric acid and sulphuric acid. The hydrothermal method synthesized zeolite-X type, and the resulting sample was characterized using different techniques. The silica/alumina ratio in the synthesized sample was approximately 5.6, while Infrared spectra confirmed that the synthesized material was Zeolite-X. Based on the X-ray diffraction patterns, other phases were also formed in addition to zeolite-X crystals. Thermogravimetry results indicated that the synthesized zeolite was relatively stable below 500℃, so its weight loss was only 13% after heating to about 200℃. A differential thermal analyzer confirmed this amount of weight loss, and endothermic and exothermic reactions were also observed for the samples calcined respectively at 700 and 900℃. Based on Brunauer-Emmett-Teller (BET) analyses, samples at 700℃ showed slower adsorption-desorption isotherms, pore volume, and sizes than those at 900℃. These results have shown that leaching and calcination temperature significantly affect the type of zeolite produced.

• 보존과학회지
• /
• 제6권1호
• /
• pp.3-14
• /
• 1997

15세기 말과 16세기 초에 철화분청을 생산했던 곳으로 잘 알려진 공주 학봉리에서 수습된 12 도편의 분청사기를 과학적으로 분석하였다. 태토와 유약의 성분은 각각 X선 형광분석기와 전자현미분석장치로 분석하였고, 미세구조분석은 광학현미경, 편광현미경, 전자현미분석장치, 그리고 X선회절분석기를 이용하였다. 태토와 유약의 성분은 학봉리에서 지리적으로 가까운 곳에 위치한 보령 용수리분청과 비교하여 통계분석을 하였으며, SPSS프로그램을 사용하였다 태토는 보령 송수리 분청에 비해 실리카와 용융제는 높게 나타났으나, 알루미나는 낮은 수치를 보였고, 유약은 실리카, 소다. 철산화물은 높은 반면, 알루미나와 칼슘산화물의 양은 낮게 나타났다. 학봉리 분청 자체도 두 그룹으로 나뉘었다. 유약은 라임계열이었으며, 태토내에는 석영, 둘레가 일부 녹은 큰 장석덩어리, 사장석, 흑운모와 철산화물과 같은 결정들이 많이 남아있음을 관찰할 수 있었다. 이러한 미세구조로 보아 원료의 수비상태가 좋지 않았고, 번조온도도 비교적 낮았음을 예측할 수 있다. 철화안료의 원료는 성분과 X선 회절분석에 의해 Mg/Fe/Al 스피넬로 확인되었다.

• 환경위생공학
• /
• 제12권1호
• /
• pp.49-58
• /
• 1997

A study on the synthesis of zeolite from bituminous coal ESP fly ash as a raw material, which was emitted from the power plant, was carried out to reduce environmental problems and reuse of the industrial wastes. Bituminous coal fly ash was used as the source of silica and alumina. Zeolite was synthesized by hydrothermal reaction in aqueous NaOH solution with sodium aluminate as additive. The objective of this study is to elucidate the effect of several experimental variables on the synthesis of zeolite. The effects of preroasting temperature, mixing speed, leaching alkalinity, and molar ratio of Na$_{2}$O/SiO$_{2}$ and SiO$_{2}$/Al$_{2}$O of the products were investigated. The synthesized zeolite was proved to be NaA, which is known as 4A type, by comparing with SEM images, and X-ray diffraction analysis. And also we know that the transformation of zeolite A take places into other types of zeolites, i.e. Hydroxysodalite, zeolite P, with the variation of leaching alkalinity.

• 멤브레인
• /
• 제22권6호
• /
• pp.424-434
• /
• 2012

본 연구에서는 CVD법으로 세라믹 막을 제조하였다. 튜브의 ${\alpha}-Al_2O_3$ 지지체 위에 Ga 염이 첨가된 ${\gamma}-Al_2O_3$를 코팅하였고, 실란화합물인 tetramethylorthosilane (TMOS) 를 $650^{\circ}C$에서 화학적 기상 증착법으로 막에 증착하였다. 제조된 세라믹 막을 사용하여 수소, 질소, 이산화탄소, 메탄의 단일조성 기체투과 실험을 $600^{\circ}C$에서 시행하였다. Ga 염 비첨가 시, $600^{\circ}C$ 수분 처리 실험의 $H_2/N_2$ 선택도가 926에서 829로 감소한 반면, Ga 염 첨가 시에는 910에서 904로 안정하였다. 이 결과를 통해, 막에 금속염을 첨가하여 제조한 막이 수분 안정성을 향상시킴을 확인하였다.

• 멤브레인
• /
• 제18권2호
• /
• pp.176-184
• /
• 2008

본 연구에서 졸-겔 방법에 의하여 나노 기공을 가지는 세라믹막을 제조하여 단일 조성의 헬륨과 질소를 가지고 기체투과 실험을 수행하였다. 기공 크기 $0.1{\mu}m$, 기공율 32%의 평막형 ${\alpha}-Al_2O_3$ 지지체를 제조하였으며, 지지체를 담지하여 코팅하는 방법으로 4nm의 기공 크기를 가지는 ${\gamma}-Al_2O_3$ 중간층을 제조하였다. 실리카 졸은 TEOS의 산 촉매 가수분해와 축중합반응을 통하여 합성하였다. 막은 딥코팅과 소결과정을 거쳐 제조되었다. 졸-겔 법에 의해 합성된 세라믹 막을 통한 헬륨, 질소 투과 실험은 기체의 투과 특성을 파악하기 위하여 시행하였다. 질소에 대한 헬륨의 선택도는 $100{\sim}160$ 정도였으며 헬륨의 투과도는 $303{\sim}363K$의 온도 범위에서 $10^{-7}mol/m^2{\cdot}s{\cdot}Pa$ 정도였다.

• 식물병연구
• /
• 제17권1호
• /
• pp.25-31
• /
• 2011

녹병은 다양한 작물의 품질과 수확량에 큰 영향을 끼친다. 따라서 이들을 방제하기 위하여 효과적이고 환경친화적인 살균제의 개발이 절실하다. 본 연구에서는 한약재로부터 항균 물질을 탐색하는 과정에서, 당귀 메탄올 추출물이 Puccinia recondita에 의해 발생하는 밀 붉은녹병에 대하여 우수한 방제효과를 나타내는 것을 확인하였다. 밀 붉은녹병에 대하여 활성을 보이는 한 개의 항균물질을 silica gel chromatography, alumina column chromatography와 $C_{18}$ preparative HPLC를 통해 분리, 정제하였다. 분리한 항균물질은 EI-MS와 $^1H$-NMR의 기기 분석 결과 decursinol angelate로 동정되었다. 이 물질은 시험한 6개의 식물병 중에서 밀 붉은녹병과 고추 탄저병에 대하여 우수한 항균활성을 보였다. 또한, 당귀의 에틸아세테이트 추출물의 수화제도 밀 붉은녹병에 대해 우수한 항균활성이 보였다. 따라서 decursinol angelate와 이를 포함한 당귀 추출물을 이용할 경우 밀 붉은녹병을 방제할 수 있는 새로운 살균제의 개발이 가능하리라 생각된다. 본 논문에서 decursinol angelate에 의한 밀 붉은녹병 방제 효과를 처음 보고하는 바이다.

• Environmental Engineering Research
• /
• 제16권1호
• /
• pp.11-18
• /
• 2011

The aim of this research was to introduce a new rapid analysis method (heating of the multi-layer silica gel column/alumina column) for polychlorinated biphenyls in insulating oils, and to compare our new method with the analytical method currently used in Korea. The entire pretreatment procedure was completed within 2 hr, using about only 20 mL of solvents via our rapid analytical method. Furthermore, the pretreatment procedure can always be uniformly performed, regardless of oil type (JIS 1~JIS 7 and KS 1~KS 7). The recovery rates were more than 89%, with relative standard deviations below 6.0%. In conclusion, this rapid analytical method could reduce the pretreatment time and solvent usage by 1/10 and between 1/25 and 1/50, respectively, compared to analytical method currently used in Korea.