• Journal of the Korean Ceramic Society
• /
• v.42 no.8 s.279
• /
• pp.554-560
• /
• 2005

The engineering ceramic needs the properties of high strength, hardness, corrosion-resistance and heat-resistance in order to withstand thermal shock or applied nonuniform stresses without failure. The densely coated porous ceramics can be used for machine component, electromagnetic component, bio-system component and energy-system component by their high-performances from superior coating properties and light-weight characteristics due to the structure including pore by itself. In this study we controlled the porosity of silica and alumina, $8.2\~25.4\%$ and $23.4\~36.0\%$, respectively, by the control of sintering temperature and starting powder size. We made bilayer structures, consisting of a transparent glass coating layer bonded to a thick substrate of different porous ceramics by a thin layer of epoxy adhesive, facilitated observations of crack initiation and propagation. The elastic modulus mismatch could be controlled using different porous ceramics as the substrate layer. Then we applied 150 N force using WC sphere with a radius of 3.18 mm by Hertzian indentation. As a result, the crack initiation in the coating layer was delayed at lower porosity in the substrate layer, and the damage in the coating layer was relatively smaller at the bilayer structure coated on higher elastic substrate.

• YAKHAK HOEJI
• /
• v.41 no.2
• /
• pp.161-173
• /
• 1997

Tuber of Aconitum chiisanense(Ranunculaceae) a specific medicinal plant in Korea, which is known to have the activity to recover reduced metabolism of feeble patients and has been used to symptoms such as pain, paralysis, atonia and coldness of extremities, etc. were studied. The powdered tubers of the plant were extracted with 10% EtOH 3 times and the combined extract was dissolved in 1N HCl solution and washed with ethyl acetate. The aqueous layer was basified with solid $Na_2CO_3$ and extracted with $CHCl_3$ to obtain an alkaloidal fraction. The alkaloidal fraction was subjected to column chromatography using silica gel, alumina and Sephdex LH 20, etc. From the alkaloidal fraction, five diterpene alkaloids, mesaconitine, aconitine, hypaconitine, 8-O-ethyl 14-benzoylmesaconine and talatizamine, were isolated and identified on the basis of their physico-chemical properties and spectroscopic evidences($^1H$-, $^{13}C$-NMR, EI-MS, IR, 2D-NMR) respectively. Especially the Compound IV, 8-O-ethyl 14-benzoylmesaconine, was assumed to be an artifact resulting from mesaconitine during extraction procedures. The contents of mesaconitine, aconitine and hypaconitine in the mother tuber of this plant were 0.300%, 0.024%, and 0.068%. And that of the attached tuber(new one) of this plant were 0.336%, 0.034% and 0.240% respectively.

• Applied Chemistry for Engineering
• /
• v.10 no.4
• /
• pp.608-614
• /
• 1999

The counter-diffusion of aromatic compounds such as coronene and tetra-phenylporphine by injection of acetone or tetra-phenylporphine solution was studied on aluminas and silica-alumina used widely as catalysts support. The counter-diffusivity was determined from simulation results by using the counter-diffusion model employing ideal adsorbed solution theory. The counter-diffusivities of aromatic compounds in the catalyst supports were ranged in ${\sim}10^{-15}m^2/sec$ in the desorption process by the injection of excess acetone. In the counter-diffusion process with tetra-phenylporphine solution which have similar concentration with adsorption solution, the counter-diffusivities of coronene were also ${\sim}10^{-15}m^2/sec$, and that of tetra-phenylporphine into pores were determined as ${\sim}10^{-11}m^2/sec$. The counter-diffusivities of coronene desobed from the adsorbent were significantly redyced in comparison with the effective diffusivities when there is counter-diffusion flux. The values mainly depended on the existence of counter-diffusion flux, but not concerned with the species and amount of desorbates.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2006.11a
• /
• pp.162-165
• /
• 2006

In this study, Liquid Phase Sintered SiC (LPS-SiC) was fabricated by hot pressing method with $\beta$-SiC powder whose a particle size is 30nm and less on the average in argon condition at 1780 and $1800^{\circ}C$ under 20MPa. Alumina ($Al_2O_3$), yttria ($Y_2O_3$) and silica ($SiO_2$) were used for sintering additives. To investigate effects of particle-size and temperature on $SiO_2$, LPS-SiC was fixed $Al_2O_3$, $Y_2O_3$ and then particle-size of $SiO_2$ were changed as two kinds. The system of particle-size and temperature on sintering additives which affects a property of sintering os well os the influence depending on particle-size and temperature of sintering additives were investigated by measurement of sintering properties. Such as measurement of sintering density, vikers hardness and observing of microstructure were investigated to make sure of the optimum condition which is about matrix of $SiC_f/SiC$ composites. Base on the composition of sintering additives, microstructure and sintering property correlation, the effect of particle-size of sintering additives are discussed. An experimental method to investigate the dynamic characteristics of bums in extreme environmental condition is established.

• Journal of the Korean Ceramic Society
• /
• v.51 no.3
• /
• pp.184-189
• /
• 2014

Electric arc furnace dust (EAFD) is a solid waste generated by the steel-scrap recycling process. It mainly consists of zinc oxides (ZnO), alumina ($Al_2O_3$), iron oxides ($Fe_2O_3$), and silica ($SiO_2$). Here we report the preparation and characterization of blue ceramic pigments using EAFD powder as a starting material. $(Zn(EAFD),Co)Al_2O_4$ blue ceramic pigment was prepared by the solid-state reaction method. The color characteristics of the pigment obtained were compared with those of pure $CoAl_2O_4$. The new pigment was characterized using XRD, CIE-$L^*a^*b^*$ color-measurements, SEM, and EDX. The XRD analysis revealed that the $(Zn(EAFD),Co)Al_2O_4$ pigment was composed of mainly the spinel phase of $(Zn,Co)Al_2O_4$. The $Zn(EAFD)_{0.25}Co_{0.75}Al_2O_4$ pigments showed a vivid blue color with a $b^*$ value of -28.64 and a good glaze stability with a transparent glaze.

• Journal of Hydrogen and New Energy
• /
• v.26 no.4
• /
• pp.339-346
• /
• 2015

The synthesis of Fischer-Tropsch (FT) oil is the catalytic hydrogenation of CO to give a range of products, which can be used for the production of high-quality diesel fuel, gasoline and linear chemicals. This studied catalyst was prepared Cobalt-supported alumina and silica by the incipient wet impregnation of the nitrates of cobalt, promoter and organic solvent with supports. Cobalt catalysts were calcined at $350^{\circ}C$ before being loaded into the FT reactors. After the reduction of catalyst has been carried out under $450^{\circ}C$ for 24h, FT reaction of the catalyst has been carried out at GHSV of 4,000/hr under $200^{\circ}C$ and 20atm. From these experimental results, we have obtained the results as following; In case of $SiO_2$ catalysts, the activity of 12wt% $Cobalt-SiO_2$ synthesized by organic solvent was about 2 or 3 times higher than the activity of 12wt% $Cobalt-SiO_2$ catalyst synthesized without organic solvent. In particular, the activity of the $Cobalt-SiO_2$ catalyst prepared in the presence of an organic solvent P was two to three times higher than that of the $Cobalt-SiO_2$ catalyst prepared without the organic solvent. Effect of Cr and Cu metal as a promoter was found little. 200 h long-term activity test was performed with a $Co/SiO_2$ catalyst prepared in the presence of an organic solvent of Glyoxal solution.

• Journal of the Korean Applied Science and Technology
• /
• v.26 no.3
• /
• pp.279-287
• /
• 2009

Fisher-Tropsch synthesis for the production of hydrocarbon from syngas was investigated on 20% cobalt-based catalysts (20% Co/HSA, 20% Co/Si-MMS), which were prepared by home-made supports with high surface areas such as high surface alumina (HSA) and silica mesopores molecular sieve (Si-MMS). In the gas phase reaction by syngas only, 20% Co/Si-MMS catalyst was shown in higher CO conversion and lower carbon dioxide formation than 20% Co/HSA, whereas the olefin selectivity was higher in 20% Co/HSA than in 20% Co/Si-MMS. In the effect of n-hexane added in syngas, the selectivities of $C_{5+}$ and olefin were increased by comparing the supercritical phase reaction with the gas phase reaction in addition to reduce unexpected methane and carbon dioxide.

• Journal of the Korean Chemical Society
• /
• v.33 no.4
• /
• pp.350-356
• /
• 1989

The analysis of adsortion behaviors of some cigarett aerosol ingredients such as tar, nicotine, carbon monoxide and a number of organic acids has shown that the rates of adsorption of the adsorbates of lower boiling point had increased in accordance with increasing cumulative pore volume, while that of higher doiling point decreased with increasing pore volume of smaller radius. The adsorbents used here were charcoal, silica gel, alumina, and activated clay. The common principle that the adsorbents of greater specific surface area adsorb the larger amount of adsorbates appeared to be disturbed in the adsortion of higher boiling point adsorbates. This confirmation was made mainly by analyzing the adsorption behaviors with regard to the pore volume distributions evaluated on the bases of desorption isotherms.

• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.897-902
• /
• 1995

To get optimum synthetic condition of zeolite A made from Kampo natural bentonite, the effects of reactant mole fraction, reaction temperature, and reaction time were studied. The source of silica was 40% -H₂SO₄ treated natural bentonite and that of alumina was synthesized NaA1O₂. The reactant was mixed at the mole ratio of SiO₂ : Al₂O₃ : Na₂O : H₂O=2 : 1 : 1 : 25 and 2 : : 1 : 37. The mixed reactants were aged at 60℃ for 1hr and reacted at 90℃, 100℃ and 120℃ for 1, 3 and 5hr. The optimum synthetic condition was SiO₂ : A1₂O₃ : Na₂O H₂O=2 : 1 : 1 : 30 at 90℃ for 3hr and the synthetic zeolite A prepared by this optimum condition showed the dehydration temperature at 79.2℃ and lattice trans-formation at 503.3℃. The wright loss of water was 5.9%.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.4
• /
• pp.48-58
• /
• 2002

As a pilot experiment for developing the monitoring system for oil spill from storage tank, previous approach of monitoring contaminated oil from mixed soil sample had the limitation that it cannot reflect the real situations of the contamination. In this study, more realistic contamination condition and water contents were considered. Fluorescence intensity was not affected by water contents. To acquire the stability of media, sand, Ca-bentonite, alumina, Fe-oxide, bead and silica were tested. Only sand was suitable to our system. These results should provide basic information for constructing reliable monitoring system.