• Geosystem Engineering
• /
• 제21권5호
• /
• pp.251-261
• /
• 2018

With the urbanization in recent years, the power line interference noise in electromagnetic signal is increasing day by day, and has gradually become an unavoidable component of noises in magnetotelluric signal detection. Therefore, a kind of power line interference noise elimination method based on independent component analysis in wavelet domain for magnetotelluric signal is put forward in this paper. The method first uses wavelet decomposition to change single-channel signal into multi-channel signal, and then takes advantage of blind source separation principle of independent component analysis to eliminate power line interference noise. There is no need to choose the layer number of wavelet decomposition and the wavelet base of wavelet decomposition according to the observed signal. On the treatment effect, it is better than the previous power line interference removal method based on independent component analysis. Through the de-noising processing to actual magnetotelluric measuring data, it is shown that this method makes both the apparent resistivity curve near 50 Hz and the phase curve near 50 Hz become smoother and steadier than before processing, i.e., it effectively eliminates the power line interference noise.

• 한국정보전자통신기술학회논문지
• /
• 제4권1호
• /
• pp.39-45
• /
• 2011

본 논문에서는 공통의 플랫폼을 기반으로 하는 모바일 와이맥스 기지국 운용용 휴대형 신호분석 시스템의 설계방법을 제안하고, 이를 하드웨어 모듈로 구현하였다. 새롭게 제안한 신호분석 방법은 RF 신호의 IF 신호로의 하향 변환 및 이득제어를 수행하는 광대역 RF 모듈과 계측 기능을 수행하는 DSP 기반 디지털 신호분석 모듈로 구현하는 것이다. 타 고정 대형 시스템과의 비교를 통해 수행한 신호분석 알고리즘의 성능을 검증한 결과, 분해능의 차이는 없음을 확인하였다.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.342-349
• /
• 2019

802.16e에 기반한 OFDMA 물리층 분석을 위한 분석 장비 개발에 있어, 하드웨어 구성 및 신호 특성 분석 알고리즘에 관한 방법론에 대해 기술하고 구현결과를 분석한다. 최근 디지털 통신 신호의 발달과 함께 이를 분석하는 계측기의 신호분석에 대한 수요도 빠르게 증가하고 있다. 신호분석에 대한 수요의 급속한 증가에 따라 광대역 디지털 신호처리 모듈을 이용한 광대역통신 신호 특성 분석이 가능한 신호분석 장비를 개발하는 것이 필요하다. 본 논문에서는 광대역통신 신호 특성 분석이 가능한 장비를 고안하기 위하여 첫째, OFDMA의 기본이론을 학습하고, 둘째 OFDMA 송/수신기 구조를 검토하였으며 셋째, 광대역 디지타이져를 구현하였다. 광대역 통신기법 중 OFDMA에 기반한 Wimax 신호분석 알고리즘을 설계하여 I, Q신호를 통한 Wimax 물리층 분석 SW구현을 제안하였다. IF다운 컨버터는 스펙트럼 분석기의 수신 모듈 및 LO발생 모듈을 이용하였으며, I, Q 데이터에 의한 WiMAX 신호분석 알고리즘을 통해 정량적 분석결과를 도출 하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권1호
• /
• pp.55-66
• /
• 2021

In this paper, we propose a signal propagation modeling technique for generating a positioning fingerprint DB based on Long Term Evolution (LTE) signals. When a DB is created based on the location-based signal information collected in an urban area, gaps in the DB due to uncollected areas occur. The spatial interpolation method for filling the gaps has limitations. In addition, the existing gap filling technique through signal propagation modeling does not reflect the signal attenuation characteristics according to directions occurring in urban areas by considering only the signal attenuation characteristics according to distance. To solve this problem, this paper proposes a Deep Neural Network (DNN)-based signal propagation functionalization technique that considers distance and direction together. To verify the performance of this technique, an experiment was conducted in Seocho-gu, Seoul. Based on the acquired signals, signal propagation characteristics were modeled for each method, and Root Mean Squared Errors (RMSE) was calculated using the verification data to perform comparative analysis. As a result, it was shown that the proposed technique is improved by about 4.284 dBm compared to the existing signal propagation model. Through this, it can be confirmed that the DNN-based signal propagation model proposed in this paper is excellent in performance, and it is expected that the positioning performance will be improved based on the fingerprint DB generated through it.

• Journal of Positioning, Navigation, and Timing
• /
• 제8권4호
• /
• pp.139-152
• /
• 2019

The design of new navigation signals is a key factor in building new satellite navigation systems and/or modernizing existing legacy systems. Navigation signal design involves selecting candidate groups and evaluating and analyzing their signal performances. This process can be easily performed through software simulation especially at the beginning of the development phase. The analytical signal performance analysis software introduced in this study is implemented based on equations between the signal design parameters of Radio Navigation Satellite Service (RNSS) and the navigation signal figures-of-merit (FoMs). Therefore, this study briefly summarizes the RNSS signal design parameters and FoMs before introducing the developed software. After that, we explain the operating sequence of the implemented software including the Graphical User Interface (GUI), and calculate the FoMs of an example scenario to verify the feasibility of the software operations.

• Near Infrared Analysis
• /
• 제1권2호
• /
• pp.1-8
• /
• 2000

Using the net analyte signal, hybrid linear analysis was proposed to predict chemical concentration. In this paper, we select a sample from training set and apply orthogonal signal correction to obtain an improved pseudo unit spectrum for hybrid least analysis. using the mean spectrum of a calibration training set, we first show the calibration by hybrid least analysis is effective to the prediction of not only chemical concentrations but also physical property variables. Then, a pseudo unit spectrum from a training set is also tested with and without orthogonal signal correction. We use two data sets, one including five chemical concentrations and the other including ten physical property variables, to compare the performance of partial least squares and modified hybrid least analysis calibration methods. The results show that the hybrid least analysis with a selected training spectrum instead of well-measured pure spectrum still gives good performances, which is a little better than partial least squares.

• Journal of information and communication convergence engineering
• /
• 제10권2호
• /
• pp.175-180
• /
• 2012

This paper presents a blind watermark detection scheme for an additive watermark embedding model. The proposed estimation-correlation-based watermark detector first estimates the embedded watermark by exploiting non-Gaussian of the real-world audio signal and the mutual independence between the host-signal and the embedded watermark and then a correlation-based detector is used to determine the presence or the absence of the watermark. For watermark estimation, blind source separation (BSS) based on independent component analysis (ICA) is used. Low watermark-to-signal ratio (WSR) is one of the limitations of blind detection with the additive embedding model. The proposed detector uses two-stage processing to improve the WSR at the blind detector; the first stage removes the audio spectrum from the watermarked audio signal using linear predictive (LP) filtering and the second stage uses the resulting residue from the LP filtering stage to estimate the embedded watermark using BSS based on ICA. Simulation results show that the proposed detector performs significantly better than existing estimation-correlationbased detection schemes.

• Journal of information and communication convergence engineering
• /
• 제7권2호
• /
• pp.170-175
• /
• 2009

This paper introduces Zigbee based ubiquitous service. Most of ubiquitous services require the position information. Positioning algorithms utilize the transmission characteristics of the signal. Zigbee based positioning researches have been conducted mainly for the spatial factors inside the building. This paper proposes the possibility to consider the temporal factors of Zigbee signal and analyzes empirically the signal characteristics influenced according to the temporal factors as well as the spatial factors for ubiquitous services based on Zigbee sensor network.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1799-1802
• /
• 2002

This paper proposes an improved method for formant frequencies estimation based on the complex autocorrelation function of the speech signal. Instead of using the incoming signal as an input fur the LPC analysis, the analytic signal of the autocorrelation function of the speech signal is computed and itself used as an input for the LPC analysis. Due to the properties of the analytic signal, which occupies half of the bandwidth of the original signal, the required model order for the LPC analysis is halved. The accuracy of the proposed method in noisy environments is examined on five natural vowels. The effectiveness of the proposed method is shown by the estimated spectral shapes and the estimation errors of the formant frequencies.

• 한국통신학회논문지
• /
• 제37권4C호
• /
• pp.283-289
• /
• 2012

웹 기반의 생체신호 모니터링 시스템은 대량의 생체신호를 처리, 분석하여 의료센터에 전송함으로써 환자에게 신속하고 적절한 의료 서비스를 제공할 수 있다. 따라서 본 논문에서는 생체 신호를 기반으로 심장 이혈 효과를 분석하기 위한 시스템을 설계, 구성하였다. 심장 이혈 효과 분석 시스템은 생체영상 및 음성신호를 입력받고 심장 관련 생체정보 특징 추출 기법을 적용하여 입력된 생체신호 측정 및 분석을 수행하였다. 또한, 피실험자 20명을 대상으로 시스템의 성능 평가를 수행하여 실제 홈 헬스케어에 적용 가능한 시스템임을 통계 분석을 통해 입증하였다.