• 한국자기공명학회논문지
• /
• 제24권2호
• /
• pp.53-58
• /
• 2020

Free radicals including reactive oxygen species (ROS) are important chemicals in the research area of biology, pharmaceutical, medical, and environmental science as well as human health risk assessment as they are highly involved in diverse metabolism and toxicity mechanisms through chemical reactions with various components of living bodies. Electron spin resonance (ESR) spectroscopy is a powerful tool for detecting and quantifying those radicals in biological environments. In this work we observed the ESR signal of 2,2,6,6-Tetra-methyl piperidine 1-oxyl (TEMPO) in aqueous solution at various concentrations to estimate the uncertainty factors arising from the experimental conditions and signal treatment methods. As the sample position highly influences the signal intensity, dual ESR tube geometry (consists of a detachable sample tube and a position fixed external tube) was adopted. This type of measurement geometry allowed to get the relative uncertainty of signal intensity lower than 1% when triple measurements are averaged. Linear dependence of signal intensity on the TEMPO concentration, which is required for the quantification of unknown sample, could be obtained over a concentration range of ~10³ by optimizing the signal treatment method depending on the concentration range.

• Geosystem Engineering
• /
• 제21권5호
• /
• pp.251-261
• /
• 2018

With the urbanization in recent years, the power line interference noise in electromagnetic signal is increasing day by day, and has gradually become an unavoidable component of noises in magnetotelluric signal detection. Therefore, a kind of power line interference noise elimination method based on independent component analysis in wavelet domain for magnetotelluric signal is put forward in this paper. The method first uses wavelet decomposition to change single-channel signal into multi-channel signal, and then takes advantage of blind source separation principle of independent component analysis to eliminate power line interference noise. There is no need to choose the layer number of wavelet decomposition and the wavelet base of wavelet decomposition according to the observed signal. On the treatment effect, it is better than the previous power line interference removal method based on independent component analysis. Through the de-noising processing to actual magnetotelluric measuring data, it is shown that this method makes both the apparent resistivity curve near 50 Hz and the phase curve near 50 Hz become smoother and steadier than before processing, i.e., it effectively eliminates the power line interference noise.

• 대한전자공학회논문지
• /
• 제10권6호
• /
• pp.25-44
• /
• 1973

원인과 결과간의 위상과 work사이의 관계를 correlation function의 견지에서 검토하였고 continuous signal에 포함되어 있는 redundancy를 지적하여 sampling취급의 근거를 auto correlation면에서 보였다. 두 신호사이의 Correlation의 시간변동을 보여줄 수 있는 Time Dependent Correlation Function을 정의하여 PLL회로에서 그 유편성을 보였다. 끝으로 다상포낙선검파법에 의한 특성의 개선을 T.D.Correlation Furction에 의한 Correlation Analysis를 통하려 입증하였다.

• 전기의세계
• /
• 제18권6호
• /
• pp.33-45
• /
• 1969

The purpose of this paper is design the most important part of sequential control systems, that is, command-treatment part, from the signal-transformation point of view. An orderly procedure is developed by which for sequential control systems the experimental design method can be reduced to the rational design method. Important in this procedure are: 1. To make total block diagram of sequential control systems by determining input and output signals of command-treatment part. 2. To partition over-all block diagram by observing each output signal. 3. To design concretely minimum block diagram by using the operational block diagram. By applying the method for partitioning the circuit to the design, the design method for sequential control systems is organized and done rationally without the aid of experiece.

• 한국항행학회논문지
• /
• 제21권6호
• /
• pp.651-658
• /
• 2017

방사선이 존재하는 환경에서 무색, 무미, 무촉의 방사선을 검출하기 위한 계측장비는 매우 중요하며 그동안 방사선 계측장비의 개발에 대한 많은 연구들이 있었다. 특히 방사선을 검출한 이후 측정된 검출신호를 손실 없이 효율적으로 처리하기 위해 검출된 미세전류를 전압형태로 정형하고, 이를 정확하게 판독하는 신호처리 부분은 매우 중요하다. 검출된 방사선 신호파형을 판독할 때, 지금까지는 신호의 전압파형을 짧은 시간 동안 일정한 값으로 유지시켜 파형의 크기를 판독한 후, 그 전기적인 값을 방전하고 다음 파형에 대비하는 피크홀드방식을 사용하였다. 이 연구에서는 방사선 검출기에서 측정된 검출신호 전압파형의 판독을 피크홀드방식이 아닌, 전압신호의 파고 정점에 이르는 시간을 포착하여 그 값을 직접 판독하는 방식을 제안한다. 이 방식에 의하면 전압 파고를 일정한 시간동안 유지하거나, 유지된 전압 파고를 초기상태로 만드는 복잡한 과정을 거치지 않고 검출된 방사선 신호를 정확하게 판독할 수 있다는 장점을 가지며, 실제 시뮬레이션을 통하여 이를 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1071-1072
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.

• Annals of Clinical Neurophysiology
• /
• 제4권2호
• /
• pp.114-118
• /
• 2002

Backgrounds : Carpal tunnel syndrome (CTS) is a common condition that is usually diagnosed by electrophysiologic studies. However, CTS provide limited information to determine the causes of CTS and to choose the treatment method. We evaluated diagnostic sensitivity of MR imaging and treatment decisions by MR imaging in electrodiagnosed CTS. Methods : 14 patients (26 wrists) with electrodiagnosed CTS were studied using MR imaging. In 26 wrists for which axial T1 & T2 weighted images were obtained at 1.5T with a decided wrist coil. Previously described MR imaging of CTS such as increased median nerve signal, flattening of median nerve, reticular bowing, tenosynovitis and space occupying lesions were retrospectively evaluated. Degree of improvement was evaluated by global symptom score (GSS). The GSS rated symptoms from 0 (no symptoms) to 10 (severe) in each of five categories: pain, numbness, paresthesia, weakness/clumsiness, and nocturnal awakening. Subjects' GSS was recorded at baseline, 2 weeks, 1 month, 6 months after treatment. We decided to medical treatment that showed mainly inflammatory sign such as increased median nerve signal, tenosinovitis and to surgical treatment such as space occupying lesion, high canal pressure sign. Results : MR imaging showed that increased median nerve signal were in 20 wrists (77%), flattening of median nerve were in 6 wrists (23%), reticular bowing were in 3 wrists (12%), tenosynovitis were in 8 wrists (32%), decreased canal size in 2 wrists (7.6%), space occupying lesion were in 1 wrist (4%). A good outcome was revealed in 21 wrists by medical treatment that showed mainly increased median nerve signal, tenosynovitis. The mean GSS were 27.7 at baseline, 11.2 at 2 weeks, 11.0 at 6 months in medical treatment group. Another 5 wrist had surgical treatment shown by ganglion and high canal pressure sign such as median nerve flattening, reticular bowing, decreased canal size: 3 wrists had good prognosis, but 2 wrists (one patient) had no significant improvement due to small carpal tunnel size. Conclusions : Our results are in agreement with most previously described MR imaging signs of CTS. MR imaging plays an important role in several cases and especially in the assessment of failure of surgical treatment. Knowledge of MR findings may permit more rational choice of treatment.

• Journal of Magnetics
• /
• 제16권3호
• /
• pp.234-239
• /
• 2011

Transcranial magnetic stimulation utilizes the method of controlling applied time and changing pulse by output pulse through power density control for diagnosis purposes. Transcranial magnetic stimulation can also be used in cases where diagnosis and treatment are difficult since output pulse shape can be changed. As intensity, pulse range, and pulse shape of the stimulation pulse must be changed according to lesion, the existing sine wave-shaped stimulation treatment pulse poses limitations in achieving various treatments and diagnosis. This study actualized a new method of transcranial magnetic stimulation that applies a 3 Stage 2 Switch( power semiconductor 2EA) for controlling pulse repetition rate by achieving numerous switching control of stimulation coil. Intensity, pulse range, and pulse shape of output can be freely changed to transform various treatment pulses in order to overcome limitations in stimulation treatment presented by the previous sine wave pulse shape. The method of freely changing pulse range by using 3 Stage 2 Switch discharge method is proposed. Pulse shape, composed of various pulse ranges, was created by grafting PFN (Pulsed Forming Network) through AVR AT80S8535 one-chip microprocessor technology, and application in transcranial magnetic stimulation was achieved to study the output characteristics of stimulation treatment pulse according to delaying time of the trigger signal applied in section switch.

• 센서학회지
• /
• 제29권4호
• /
• pp.249-254
• /
• 2020

It is difficult to control children who exhibit negative behavior in dental clinics. Various methods are used for preventing pediatric dental patients from being afraid and for eliminating the factors that cause psychological anxiety. However, when it is difficult to apply this routine behavioral control technique, sedation therapy is used to provide quality treatment. When the sleep anesthesia treatment is performed at the dentist's clinic, it is challenging to identify emergencies using the current breath detection method. When a dentist treats a patient that is under the influence of an anesthetic, the patient is unconscious and cannot immediately respond, even if the airway is blocked, which can cause unstable breathing or even death in severe cases. During emergencies, respiratory instability is not easily detected with first aid using conventional methods owing to time lag or noise from medical devices. Therefore, abnormal breathing needs to be evaluated in real-time using an intuitive method. In this paper, we propose a method for identifying abnormal breathing in real-time using an intuitive method. Respiration signals were measured using a 3M Littman electronic stethoscope when the patient's posture was supine. The characteristics of the signals were analyzed by applying the signal processing theory to distinguish abnormal breathing from normal breathing. By applying a short-time Fourier transform to the respiratory signals, the frequency range for each patient was found to be different, and the frequency of abnormal breathing was distributed across a broader range than that of normal breathing. From the wavelet transform, time-frequency information could be identified simultaneously, and the change in the amplitude with the time could also be determined. When the difference between the amplitude of normal breathing and abnormal breathing in the time domain was very large, abnormal breathing could be identified.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 특별세미나 특별세션
• /
• pp.189-197
• /
• 2006

Maglev using EMS becomes unstable by unexpected big air-gap disturbance. The main causes of the unexpected air-gap disturbance are step-wise rail joint and large distance between rail splices. For the stable operation of the Maglev, the conventional system uses the threshold method, which selects one gap sensor among two gap sensors installed on the magnet to read the gap between magnet and guide rail. But the threshold method with a wide bandwidth makes the discontinuous air-gap signal at the rail joints because of the offset in air gap sensors and/or the step-wise rail joins. Further more, in the case of the one with a narrow bend-width, it makes Maglev system unstable because of frequent alternation. In this paper, a new method using fuzzy rule to reduce air-gap disturbances proposed to improve the stability of Maglev system. It treats the air-gap signal from dual gap sensors effectively to make continuous signal without air gap disturbance. Simulation and experiment results proved that the proposed scheme was effective to reduce air-gap disturbance from dual gap sensors in rail joints.