• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1847-1855
• /
• 2012

A 1V 1.6-GS/s 6-bit flash analog-to-digital converter (ADC) with a clock calibration circuit is proposed. A single track/hold circuit with a bootstrapped analog switch is used as an input stage with a supply voltage of 1V for the high speed operation. Two preamplifier-arrays and each comparator composed of two-stage are implemented for the reduction of analog noises and high speed operation. The clock calibration circuit in the proposed flash ADC improves the dynamic performance of the entire flash ADC by optimizing the duty cycle and phase of the clock. It adjusts the reset and evaluation time of the clock for the comparator by controlling the duty cycle of the clock. The proposed 1.6-GS/s 6-bit flash ADC is fabricated in a 1V 90nm 1-poly 9-metal CMOS process. The measured SNDR is 32.8 dB for a 800 MHz analog input signal. The measured DNL and INL are +0.38/-0.37 LSB, +0.64/-0.64 LSB, respectively. The power consumption and chip area are $800{\times}500{\mu}m2$ and 193.02mW.

• Journal of Sensor Science and Technology
• /
• v.11 no.2
• /
• pp.84-92
• /
• 2002

A $32{\times}32$ pixels foveated (linear-polar) structure retina chip with the function of local-light adaptation for edge detection has been designed and fabricated using CMOS technology. Human retina can detect a wide range of light intensity. In this study, we use the biologically-inspired visual signal processing mechanism that consists of photoreceptors, horizontal cells, and bipolar cells in order to implement the function of edge detection in the retina chip. For a local-light adaptive function, the size of receptive field is changed locally according to the input light intensity. The spatial distribution of sensing pixels in the foveated retina chip has the advantages of selective reduction of image data and good resolution in central part to carry out the elaborate image processing with still enough resolution in the outer parts. The designed chip has been fabricated using standard $0.6\;{\mu}m$ double-poly triple-metal CMOS technology and optimized using HSPICE simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11C
• /
• pp.1085-1097
• /
• 2009

We present a structure and design method of the D8PSK modem compatible with the VDL mode-2 standard and performance test results of the developed modem. In VDL mode-2, the raised cosine filter is used only in the transmitter and a general low pass filter is used in the receiver. Consequently, we can not achieve ISI reduction but can have better spectrum characteristics. Although there is 1~2 dB performance degradation with an un-matched filter compared to that with a matched filter, it is more important to minimize adjacent channel interference in narrow band communications. The transmit signal is generated digitally to avoid the problems(I/Q imbalance and DC offset etc.) of analog modulators. In addition the digital down converter using digital IF sampling technique is adopted for the receiver. This paper contains the overall configuration, design method and simulation results based in part on the previously proposed structures and algorithms. It is confirmed that the modem transmits and receives messages successfully at a speed of max. 870 km/h over ranges of up to 310 km through the ground and in-flight communication tests.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.11-18
• /
• 2016

Since GNSS signals get blocked by buildings in urban canyons or narrow alleys, it is very difficult to secure a enough number of visible satellites for satellite navigation in those poor signal-reception environments. In those situations, one cannot get their coordinates or obtain accurate positions. In this study, a couple of strategies for improving positioning accuracy in urban canyons were developed and their performance was verified. First of all, we combined GPS and GLONASS measurements together and devised algorithms to quality-control observed signals and eliminate outliers. Also, a new multipath reduction scheme was applied to minimize its effect by utilizing SNR values of the observed signals. For performance verification of the developed technique, a narrow alley of 10m width located near the back gate of the Inha University was selected as the test-bed, and then we conducted static and kinematic positioning at four pre-surveyed points. We found that our new algorithms produced an 45% improvement in an open-sky environment compared with the positioning result of a low-cost u-blox receiver. In the alleys, 3-D accuracy improved by an average of 37%. In the case of kinematic positioning, especially, biases showing up in regular receivers got eliminated significantly through our new filtering algorithms.

• Geophysics and Geophysical Exploration
• /
• v.2 no.4
• /
• pp.180-183
• /
• 1999

A proto-type seismic measurement system with a reference was developed to improve S/N (signal-to-noise ratio) of seismic data, especially in noisy urban areas. Two pairs of correlation measurements (the one for microphone and geophone, and another for electromagnetic (EM) loop and geophone) were carried out near Kimpo Airport and at Kimje. The spectrum analyses were also performed to investigate the correlation of two pairs of time series; one for microphone and geophone, and another for EM loop and geophone. The sound waves measured with the microphone and the geophone are highly correlated. However, differences in the reponses are readily identifiable across 200 Hz; in the vicinity of 100 Hz, the spectral energy for geophone is 20 dB higher than that for microphone, and at near 500 Hz, the spectral energy for microphone is 30 dB higher than that for geophone. Overall, the spectral energy appears concentrated on the frequency window below 600 Hz for geophone. It contrasts with the observation of dominant frequency at the range of above 200 Hz for microphone. The wave forms of EM noise (due to an ACDC inverter) measured with EM loop and geophone are consistently and highly correlated each other. The power spectrum of the EM noise for EM loop shows that the spectral energies at odd harmonic frequencies of 60 Hz are higher than those at even harmonic frequencies of 60 Hz. It is compared to the power spectrum for geophone; the spectral energies at odd harmonics are nearly same as those at even harmonic frequencies.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.58-63
• /
• 2013

This paper presents a transceiver design for DisplayPort interface using an optical channel. By converting the electronic channel to the optical channel, the DisplayPort's main channel can provide a high-speed data transmission for long distance. The design converting the electronic channel to the optical channel in the main channel and AUX channel of the DisplayPort is presented in this paper. Futhermore, the HPD signal transmission by using AUX channel is proposed. In order to minimize power consumption, this paper also proposed a method of controlling the TX block in the main link. The proposed system is designed by a FPGA and an optical module. The FPGA used 651 ALUT(adaptive look-up table)s, 511 resisters and 324 block memory bits. The maximum operating rate of the FPGA is 250MHz. With the proposed power control scheme, 740mW of power dissipation reduction can be achieved at the main link optical TX module.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.6
• /
• pp.501-506
• /
• 2017

An infrared seeking missile does not emit any signal by itself as it is guided by passive heat signature from an aircraft. Therefore, it is difficult for the target aircraft to notice the existence of incoming missile, making it a serious threat. The usage of MAW(missile approach warning) that can notify the approaching infrared seeking missile is currently limited due to its high cost. Furthermore, effectiveness of MAW against infrared seeking missile is not available in open literature. Therefore, effect of evasive maneuver by MAW on the survivability of the aircraft is simulated to evaluate the benefit of the MAW in this research. The lethal range is used as a measure of aircraft survivability. An aircraft flying at an altitude of 5km with Mach 0.9 being tracked by air-launched AIM-9 infrared seeking missile is considered in this research. As a variable for the evasive maneuver, the MAW recognition distance of 5~7km and the G-force of 3~7G that limits maximum directional change of the aircraft are considered. Simulation results showed that the recognition of incoming missile by MAW and following evasive maneuver can reduce the lethal range considerably. Maximum reduction in lethal range is found to be 29.4%. Also, the MAW recognition distance have a greater importance than the aircraft maneuverability that is limited by structural limit of the aircraft.

• The Korean Journal of Zoology
• /
• v.39 no.4
• /
• pp.337-351
• /
• 1996

Melatonin Is a multifunctional hormone secreted from the pineal gland in the middle of cerebrum and cerebellum. Its synthesis and release reflect photopedod;Photopedod is a yearly predictable ambient factor that most animals utilize as an environmental cue for maximum survival. Hamsters maintaln reproductive activity in summer during which day length exceeds night time. Upon the advent of autumnal equinox they undergo gonadal regression. The photoperiodic effects are prevented by removal of the pineal gland and restored by the timed repiacument of melatonin. The results suggest that melatonin constitutes part of control mechanism whereby environmental information is transduced to neuroendocrine signal responsIble for the functional integrity of the reproductive system. From the studies for the action site of melatonin following the treatment of photopedod or melatonin in the lesion of a spedflc portion of hypothalamus, suprachiasmatic nuclei and pars tuberalis are shown to be a consensus site for melatonIn. The action of melatonin. In the regulation of reproduction is largely unknown. It is mainly due to the lack of acute effect of melatonin on gonadotropin secretion. However, reduction of the gonadotropln release and augmentation of the hypothalamic gonadotropin-releasing hormone (GnRH) content by long-term treatment of melatonln Indicate that constant presence of melatonln may partidpate in the regulation of sexual activity via the GnRH neuronal system. The action mechanism by which melatonin exerts Its effect on GnRH neuron needs to be eluddated. The inability of opiold analogues to affect the reproductive hormones in sexually regressed animals by inhibftory photopedod and melatonin suggests that the opioldergic neuron may be a prime intervening mediator. Recent cloning of melatonin receptor will contribute to investigate its anatomical Identification and the action mechanism of melatonin on target tissues at the molecular level.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.7
• /
• pp.91-98
• /
• 2010

Large corpus-based concatenating Text-to-Speech (TTS) systems can generate natural synthetic speech without additional signal processing. Because the improvements in the natualness, personality, speaking style, emotions of synthetic speech need the increase of the size of speech DB, it is necessary to prune the redundant speech segments in a large speech segment DB. In this paper, we propose a new method to construct a segmental speech DB for the Korean TTS system based on a clustering algorithm to downsize the segmental speech DB. For the performance test, the synthetic speech was generated using the Korean TTS system which consists of the language processing module, prosody processing module, segment selection module, speech concatenation module, and segmental speech DB. And MOS test was executed with the a set of synthetic speech generated with 4 different segmental speech DBs. We constructed 4 different segmental speech DB by combining CM1(or CM2) tree clustering method and full DB (or reduced DB). Experimental results show that the proposed method can reduce the size of speech DB by 23% and get high MOS in the perception test. Therefore the proposed method can be applied to make a small sized TTS.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.