• 제목/요약/키워드: Signal generator

검색결과 788건 처리시간 0.028초

SS-OCT용 고 주파수분해능 저비용 정현파 발생기 (Low Cost Signal Generator with Frequency High-Resolution for SS-OCT)

  • 이주찬;엄진섭
    • 센서학회지
    • /
    • 제22권1호
    • /
    • pp.84-88
    • /
    • 2013
  • In this paper, the low price signal generator with capability of frequency high-resolution and variable sync pulse has implemented. It fulfils well the requirements for SS-OCT of the frequency resolution less than 1Hz, frequency stability of ${\leq}{\pm}0.5Hz$/10 min and variable sync pulse output timing. Through its performance test applied to wavelength swept laser, 120 nm sweeping range and 10 mW average optical power were obtained. This shows that the realized sine-wave generator can replace the commercial high cost and high performance signal generators employed by current SS-OCT systems.

A Novel High Speed Frequency Sweeping Signal Generator in X-band Based on Tunable Optoelectronic Oscillator

  • Sun, Mingming;Chen, Han;Sun, Xiaohan
    • Current Optics and Photonics
    • /
    • 제2권1호
    • /
    • pp.53-58
    • /
    • 2018
  • A novel X-band high speed frequency sweep signal generator based on a tunable optoelectronic oscillator (OEO) incorporating a frequency-swept laser is presented and the theoretical fundamentals of the design are explained. A prototype of the generator with tuning range from 8.8552 GHz to 10.3992 GHz and a fine step about 8 MHz is achieved. The generated radiofrequency signal with a single sideband (SSB) phase noise lower than -100 dBc/Hz@10KHz is experimentally demonstrated within the whole tunable range, without any narrow RF band-pass filters in the loop. And the tuning speed of the frequency sweep signal generator can reach to over 1 GHz/s benefiting from applying a novel dispersion compensation modular instead of several tens of kilometers of optical fiber delay line in the system.

200kW급 엔진-발전기의 디지털 전압제어 시스템 설계 (Design of Digital Voltage Regulation System for 200kW Engine-Generator)

  • 김태형;이동희;안진우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.912-913
    • /
    • 2008
  • In this paper, peak detector of generator output voltage and variable gain controller is introduced for the fast dynamic response. The general r.m.s. detecting signal of generator has inherent time delay from the actual signal. So the dynamic response of generator using conventional PID controller has some problem in sudden load change. In order to overcome this problem, the peak detector and signal selector with variable gain controller is used in this paper. The proposed control scheme is verified from experimental test of 200kW diesel engine-generator.

  • PDF

전압 이중 검출법에 의한 독립형 엔진-발전기 시스템 응답특성 개선 (Dynamic Response Improvement of Stand Alone Engine-Generator System using Double Voltage Detection Method)

  • 이동희;안진우
    • 전기학회논문지
    • /
    • 제57권7호
    • /
    • pp.1195-1199
    • /
    • 2008
  • In this paper, peak detector of generator's output voltage and variable gain controller are introduced for a fast dynamic response. The conventional r,m.s, signal detected has inherent time delay, and the dynamic response of generator using conventional PID controller has some problem in sudden load change. In this paper, the peak detector and signal selector with variable gain controller is used to overcome this problem. The main controller can check the voltage state from the peak detector. When a sudden load change, the over-voltage and under-voltage signal from peak detector change the controller's gain and exciter's current reference. The proposed scheme can improve the dynamic response, which is verified from experimental test of 200kW diesel engine-generator.

가속도 충격파형을 이용한 기기의 결함 위치분석 및 진단사례 (Case_study of detecting loose part by acceleration signal)

  • 유무상;박승도;박현철;최낙균
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2007년도 춘계학술대회논문집
    • /
    • pp.463-468
    • /
    • 2007
  • The abnormal sound of generator frame is analyzed by a acceleration signal. The spike-like time signal is major characteristics of impacting force. The distributional map of vibration level is one of visualization method. With map, noise source was easily detected. After de_assembly of generator, loose part of internal component is the source of impact force by mechanical movement of stator inherently. In contact condition of part with clearance, the level of impact signal is different at each revolution and impact signal did not happens periodically.

  • PDF

위성항법 신호생성 시뮬레이터 구현을 위한 신호생성 알고리즘 연구 (Study on for Simulation of GNSS Signal Generation)

  • 김태희;이재은;이상욱;김재훈;황동환
    • 한국항공우주학회지
    • /
    • 제37권11호
    • /
    • pp.1148-1156
    • /
    • 2009
  • 본 논문에서는 위성항법분야에서 다양한 응용서비스와 항법알고리즘을 개발 또는 검증하기 위하 기능을 제공하기 위한 소프트웨어 기반의 GNSS 신호시뮬레이터 개발에 관한 것이다. GNSS 신호생성 시뮬레이터를 개발하기 위하여 위성궤도생성, 항법메시지생성, 오차생성, IF 신호생성부로 나누어 구현하였으며 각 기능은 서로의 인터페이스를 통하여 데이터를 전송하게 된다. 여기서 실질적인 위성신호와 유사한 IF 신호를 생성하기 위하여 본 논문에서 제안한 신호생성 알고리즘을 이용하여 신호를 생성한 후 수신기를 통하여 생성된 신호를 검증하였다.

A Design and Measurement of a Reference Signal Generator for a Radar System

  • Kim, Dong-Sik;Kim, Min-Chul;Lee, Su-Ho;Baik, Seung-Hun;Kwon, Ho-Sang;Jeong, Myung-Deuk
    • Journal of electromagnetic engineering and science
    • /
    • 제9권3호
    • /
    • pp.118-123
    • /
    • 2009
  • This paper discusses the design and fabrication of a reference signal generator for a naval radar system, including the vibration environment test. The transmit signals of the S-band radar system are synthesized by the reference signal and the phase noise must lower than - 130 dBc/Hz at a 10 kHz offset frequency. To achieve this specification, the phase noise of the reference signal needs to be less than -165 dBc/Hz at a 10 kHz offset. For achieving very low phase noise performance by the reference signal generator, the phase locked loop technique is applied with a 10 Hz loop bandwidth. Also, this reference signal generator has ${\pm}0.35\;ppb$ short-term stability to minimize instant phase errors and high vibration sensitivity against a ship's shaking, unbalanced rotating of antennas and so on.

Signal processing method of bubble detection in sodium flow based on inverse Fourier transform to calculate energy ratio

  • Xu, Wei;Xu, Ke-Jun;Yu, Xin-Long;Huang, Ya;Wu, Wen-Kai
    • Nuclear Engineering and Technology
    • /
    • 제53권9호
    • /
    • pp.3122-3125
    • /
    • 2021
  • Electromagnetic vortex flowmeter is a new type of instrument for detecting leakage of steam generator, and the signal processing method based on the envelope to calculate energy ratio can effectively detect bubbles in sodium flow. The signal processing method is not affected by changes in the amplitude of the sensor output signal, which is caused by changes in magnetic field strength and other factors. However, the detection sensitivity of the electromagnetic vortex flowmeter is reduced. To this end, a signal processing method based on inverse Fourier transform to calculate energy ratio is proposed. According to the difference between the frequency band of the bubble noise signal and the flow signal, only the amplitude in the frequency band of the flow signal is retained in the frequency domain, and then the flow signal is obtained by the inverse Fourier transform method, thereby calculating the energy ratio. Using this method to process the experimental data, the results show that it can detect 0.1 g/s leak rate of water in the steam generator, and its performance is significantly better than that of the signal processing method based on the envelope to calculate energy ratio.

발전기시스템의 고정자보호 IED를 위한 개선된 알고리즘 (Advanced Algorithm for IED of Stator Winding Protection of Generator System)

  • 박철원
    • 전기학회논문지P
    • /
    • 제57권2호
    • /
    • pp.91-95
    • /
    • 2008
  • The large AC generator fault may lead to large impacts or perturbations in power system. The generator protection control systems in Korea have been imported and operated through a turn-key from overseas entirely. Therefore a study of the generator protection field has in urgent need for a stable operation of the imported goods. In present, the algorithm using the current ratio differential relaying based DFT for stator winding protection or a fault detection had been applied that of internal fault protection of a generator. the DFT used for the analysis of transient state signal conventionally had defects losing a time information in the course of transforming a target signal to frequency domain. In this paper, the discrete wavelet transform (DWT) was applied a fault detection of the generator being superior to a transient state signal analysis and being easy to real time realization. The fault signals after executing a terminal fault modeling collect using a MATLAB package, and calculate the wavelet coefficients through the process of a muiti-level decomposition (MLD). The proposed algorithm for a fault detection using the Daubechies WT (wavelet transform) was executed with a C language and the commend line function for the real time realization after analyzing MATLAB's graphical interface. The advanced technique had improved faster a speed of fault discrimination than a conventional DFR based on DFT.

이동체의 수신 환경을 고려한 GNSS 신호 생성기 개발 (Development of a GNSS Signal Generator Considering Reception Environment of a Vehicle)

  • 조성룡;박찬식;황상욱;최윤섭;이주현;이상정;백정기;이동국;지규인
    • 한국통신학회논문지
    • /
    • 제37C권9호
    • /
    • pp.811-820
    • /
    • 2012
  • GNSS 신호는 구조가 개방되어 있을 뿐만 아니라 수신 신호 세기가 미약하여 전파교란에 취약하다. 이에 따라 전파교란에 대한 영향 분석 및 대응 기법에 대한 연구의 필요성이 증대되고 있다. 본 논문에서는 실제 전파교란 환경과 유사한 환경에서의 전파교란 영향 분석을 위하여 6가지 전술 환경에 대한 전파 전파 모델과 이동체의 수신환경을 고려한 동체 차단 모델을 설계 하였다. 전파전파 모델은 도심지역, 농촌지역, 수풀지역, 해안지역, 황무지, 눈/얼음 지역에 대해서 Two-ray 모델을 이용하여 설계 하였다. 동체 차단 모델은 안테나가 이동체에 의하여 받는 영향과 사용자가 직접 입력한 안테나 패턴을 이용하여 모델링하였다. 전파교란이 없는 정상 환경과 전파교란 환경에 대하여 이동체의 수신환경을 고려한 GNSS 신호 생성기의 출력은 상용수신기(NordNav)를 이용하여 검증 하였다. 정상 환경에서는 사용자의 항법 성능이 상용 H/W 신호 생성 시뮬레이터(STR4500)과 유사한 것을 확인하였다. 전파교란 환경에서는 이동체 위치에 따른 동체 차단 효과 및 전파교란 신호에 의한 GNSS 신호 획득 및 추적 손실이 정확히 반영됨을 확인 하였다.