• 대한의용생체공학회:의공학회지
• /
• 제28권6호
• /
• pp.798-802
• /
• 2007

The synthetic focusing in the ultrasonic imaging systems has been formed in the way that one element transmits a circular wave and receives an echo signal. The amplitude of the signal transmitted from one element is too small to propagate a long distance so that the SNR(Signal to Noise Ratio) is very low in an image obtained by the synthetic focusing. To solve this problem, a defocusing method which uses several elements has been proposed. In this method, the SNR is improved due to using several elements to transmit the circular wave. But if the number of transmitting elements increases, the phase distortion is severe in the defocusing method. In this paper, we propose a new method that can generate a circular wave using a lot of elements without phase distortion. At first, we generate limited plane waves with different propagation angles and then superpose them to make a circular wave. We show that the circular wave can be used to improve SNR in the real-time 3D ultrasonic imaging as well as the synthetic focusing through computer simulation and experiments.

• 한국통신학회논문지
• /
• 제1권1호
• /
• pp.23-31
• /
• 1976

VHF 및 UHF 챠넬의 TV 信號는 映像 및 音聲을 포함한 6MHz의 대역폭으로 챠넬變換 된후 直線增幅器를 통해 재 送信될 때 搬送波付近의 兩側波帶傳送領域에서 出力振幅周波數特性에 不自然스러운 變化가 생겨 화질에 影響을 주는수가 있다. 이러한 現像은 發振器로 부터의 不要信號로 因한 不要下側帶波의 發生등 問題가 되는 要因인 트랜지스터 直線增幅器의 非直線性, MIXER 회로에서의 상호변조 歪 AM-PM 變換 및 envelope delay 特性 등을 고려하여 出力特性을 구한 결과 主原因은 非直線性에 의한 것이였으며 實驗結果로서는 非直線性의 主因으로 Bias 조건의 불합리 및 發振器로 부터의 不要周波數의 發生이 가장 큰 原因으로 나타났다. 특히 인접信號에 對한 相互變調歪 및 不要信號發生은 Up conversion의 경우가 Down Conversion의 경우보다 현저히 감소됨을 확인하였고 發振器로부터의 spurious가 system에 영향을 주지 않는 方案을 모색하였다.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.101-112
• /
• 2004

본 논문에서는 3차원 인터커넥트(3D interconnect) 구조를 해석하기 위하여 ADI-유한차분시간영역(ADI-FDTD: Alternating Direction Implicit Finite Difference Time Domain)법으로 맥스웰 회전 방정식(Maxwell's curl equation)을 계산하는 수치 해석 모델을 개발하였고, 개발한 ADI-유한차분시간영역법을 이용하여 3.3 V CMOS 기술로 설계된 샘플러 회로의 일부의 영역에 대해 컴퓨터 모의 실험 결과하여 입력된 구형 전압 신호가 금속 배선을 거치면서 5∼10 ps의 신호 지연과 0.1∼0.2 V의 신호 왜곡이 발생되는 것을 확인하였다. 결론적으로 ADI-유한차분시간영역법을 이용한 풀-웨이브 해석을 통하여 고속의 VLSI 인터커넥트에서의 전자기 현상을 정확하게 분석할 수 있음을 제시하였다.

• 대한의용생체공학회:의공학회지
• /
• 제16권4호
• /
• pp.517-524
• /
• 1995

This paper is a study on the design of the cascade adaptive filter (CAF) for baseline wandering elimination in order to enhance the performance of the detection of ST segments in ECG. The CAF using Least Mean Square (LMS) algorithm consists of two filters. The primary adaptive filter which has the cutoff frequency of 0.3Hz eliminates the baseline wandering in raw ECG The secondary adaptive filter removes the remnant baseline wandering which is not eliminated by the primary adaptive filter. The performance of the CAF was compared with the standard filter, the recursive filter, and the adaptive impulse correlated filter (AICF). As a result, the CAF showed a lower signal distortion than the standard filter and the AICF. Also, the CAF showed a better perf'ormance in noise elimination than the standard filter and the recursive filter. In conclusion, considering the characteristics of the noise elimination and the signal distortion, the CAF shows a better performance in the removal of the baseline wandering than the other three Otters and suggests the high performance in the detection of ST segment.

• 문화기술의 융합
• /
• 제4권4호
• /
• pp.379-385
• /
• 2018

본 논문은 절연된 환경에서 멀티채널 아날로그 신호의 정확하고 안전한 전송을 위해 옵토커플러를 활용한 신호의 전송과 절연에 대해 다룬다. 신호의 전송 과정에서 절연 소자의 온도 의존성과 비선형성에 의한 신호의 왜곡을 최소화하고 우수한 잡음 여유도를 확보하기 위해 디지털 절연을 이용한 디지털 전송을 연구한다. 옵토커플러를 적용한 디지털 전송에 대한 이론적 고찰을 토대로 멀티채널 아날로그 신호의 전송 회로를 제안하였고 디지털 데이터의 직렬 전송 프레임도 설계하였다. 이론적 고찰과 일치하는 실험 결과를 통하여 제안하는 회로와 구현된 프로그램이 절연 장벽을 극복하고 멀티채널 아날로그 신호를 정확히 전송할 수 있음을 증명하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.187-190
• /
• 1999

In order to predict the effect of power amplifier non-linearity for digital modulated signal, this paper analyses the adjacent channel power ratio(ACPR) with the various AM-to-PM distortion levels. As the phase distortion increases from 0$^{\circ}$ to 12$^{\circ}$ at 1㏈compression point by 2.4$^{\circ}$ step, the input power level which satisfies the required ACPR decreases from 3.5㏈ to 6.5㏈ less than the 1㏈ compression input power.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.345-347
• /
• 2016

최근 위치 기반 서비스는 실외에서 GPS와 같이 실외 위치 정보를 이용할 수 없는 실내의 서비스로 확대되고 있다. 이와 같이 BLE(Bluetooth Low Energy) iBeacon 기술의 발전과 더불어 실내 측위 시스템의 연구가 확대되고 있다. 그러나 측위를 위해 iBeacon과 단말의 거리정보로 사용되는 RSSI(Received Signal Strength Indicator) 신호는 무선 전파의 특성으로 인해 신호 감쇄 및 지연과 같은 왜곡된 정보의 발생이라는 문제점을 갖는다. 본 논문에서는 신뢰성 있는 실내 위치 측위 시스템을 위한 왜곡된 iBeacon 신호의 신뢰성을 검증하기 위한 거리의 정보 검증 기법을 제안한다.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권4호
• /
• pp.173-180
• /
• 2015

In this study, an algorithm that detects a spoofing signal for a GPS L1 signal was proposed, and the performance was verified through RF spoofing signal simulation. The proposed algorithm determines the reception of a spoofing signal by detecting a correlation distortion of GPS L1 C/A code caused by the spoofing signal. To detect the correlation distortion, a detection criterion of a spoofing signal was derived from the relationship among the Early, Prompt, and Late tap correlation values of a receiver correlator; and a detection threshold was calculated from the false alarm probability of spoofing signal detection. In this study, an RF spoofing environment was built using the GSS 8000 simulator (Spirent). For the RF spoofing signal generated from the simulator, the RF spoofing environment was verified using the commercial receiver DL-V3 (Novatel Inc.). To verify the performance of the proposed algorithm, the RF signal was stored as IF band data using a USRP signal collector (NI) so that the data could be processed by a CNU software receiver (software defined radio). For the performance of the proposed algorithm, results were obtained using the correlation value of the software receiver, and the performance was verified through the detection of a spoofing signal and the detection time of a spoofing signal.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1995년도 추계학술대회
• /
• pp.101-104
• /
• 1995

In this paper, we designed a cascade adaptive filter for elimination of the baseline drift and the distortion of the filtered signal. The cascade adaptive filter(CAF) consists of two filters. The first adaptive filter which has the cutoff frequency of 0.3Hz eliminate the noisy signal. The second adaptive filter remove the remnant baseline drift which is not eliminated by the first adaptive filter. Comparing the performance of the CAF with standard filter, recursive notch filter(RNF) and a adaptive impulse correlated filter(AICF), the CAF showed a higher performance in removal of the baseline drift than standard filler, and RNF. Also, considering the distortion of filtered signal, CAF is better than AICF and is comparable to the standard filter.

• Journal of Power Electronics
• /
• 제10권3호
• /
• pp.277-284
• /
• 2010

This paper presents a novel hybrid carrier based space vector modulation for cascaded multilevel inverters. The proposed technique inherits the properties of carrier based space vector modulation and the fundamental frequency modulation strategy. The main characteristic of this modulation are the reduction of power loss, and improved harmonic performance. The carrier based space vector modulation algorithm is implemented with a TMS320F2407 digital signal processor. A Xilinx Complex Programmable Logic Device is used to develop the hybrid PWM control algorithm and it is integrated with a digital signal processor for hybrid carrier based space vector PWM generation. The inverter offers less weighted total harmonic distortion and it operates with equal electrostatic and electromagnetic stress among the power devices. The feasibility of the proposed technique is verified by spectral analysis, simulation, and experimental results.