• 한국음향학회지
• /
• 제14권6호
• /
• pp.62-67
• /
• 1995

본 논문에서는 금속내부에 존재하는 결함의 다양한 형태로부터 반사된 초음파 신호를 디지탈 신호처리에 의하여 특징추출하는 방법을 연구분석하였다. 다양한 형태의 결함으로부터 반사된 초음파 신호는 잡음 등의 영향으로 그 특징의 구별이 애매하므로 자기 회기법(auto-regressive)을 이용한 위너 필터링(Wiener filtering)과 최소 절대치 노름(least-absolute-values norm) 기법을 사용하여 신호의 특징을 추출하고 상호 비교분석하였다. 실험에서는 알루미늄 시편에 평면결함, 사각결함, 원형결함의 세가지 결함형태를 제작하였으며, 초음파를 입사하고 펄스-에코 방법에 의하여 반사신호를 측정하였다. 반사신호의 디지탈 신호처리 결과, 이러한 특징추출방법은 다양한 형태의 결함으로부터 반사된 신호를 효율적으로 분류 할 수 있었다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1998년도 추계학술대회 논문집
• /
• pp.60-65
• /
• 1998

Recently, It is gradually raised necessity that thickness of thin film is measured accuracy and managed in industrial circles and medical world. Ultrasonic Signal processing method is likely to become a very powerful method for NDE method of detection of microdefects and thickness measurement of thin film below the limit of Ultrasonic distance resolution in the opaque materials, provides useful information that cannot be obtained by a conventional measuring system. In the present research, considering a thin film below the limit of Ultrasonic distance resolution sandwiched between three substances as acoustical analysis model, demonstrated the usefulness of ultrasonic Signal processing technique using information of ultrasonic frequency for NDE of measurements of thin film thickness, sound velocity, and step height, regardless of interference phenomenon

• 융합신호처리학회논문지
• /
• 제15권2호
• /
• pp.37-41
• /
• 2014

The vector Taylor series (VTS) based method usually employs clean speech Hidden Markov Models (HMMs) when compensating speech feature vectors or adapting the parameters of trained HMMs. It is well-known that noisy speech HMMs trained by the Multi-condition TRaining (MTR) and the Multi-Model-based Speech Recognition framework (MMSR) method perform better than the clean speech HMM in noisy speech recognition. In this paper, we propose a method to use the noise-adapted HMMs in the VTS-based speech feature compensation method. We derived a novel mathematical relation between the train and the test noisy speech feature vector in the log-spectrum domain and the VTS is used to estimate the statistics of the test noisy speech. An iterative EM algorithm is used to estimate train noisy speech from the test noisy speech along with noise parameters. The proposed method was applied to the noise-adapted HMMs trained by the MTR and MMSR and could reduce the relative word error rate significantly in the noisy speech recognition experiments on the Aurora 2 database.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 추계종합학술대회논문집
• /
• pp.225-228
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control in various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade-approximated, then initial values are determined by the Ziegler-Nickels method. So deciding binary strings of parents generation using by the fitness values of genetic algorithms, we perform selection, crossover and mutation to generate the descendant generation. The advantage of this method is better than the Ziegler-Nickels method in characteristic of output, and has extent of applying without limit of K, L, T parameters.

• 융합신호처리학회 학술대회논문집
• /
• 한국신호처리시스템학회 2000년도 하계종합학술대회논문집
• /
• pp.109-112
• /
• 2000

We propose a new method to deal with the optimized auto-tuning for the PID controller which is used to the process-control In various fields. First of all, in this method, 1st order delay system with dead time which is modelled from the unit step response of the system is Pade -approximated, then initial values are determined by the Ziegler-Nichols method. After inputting constraints of evolution programs, we perform crossover and mutation to generate the descendant generation. The advantage of this method is better than the Ziegler-Nickels method in characteristic of output and has extent of applying without limit of K, L, T.

• 한국정밀공학회지
• /
• 제31권2호
• /
• pp.149-156
• /
• 2014

Flexible tactile sensors can provide valuable feedback to intelligent robots about the environment. This is especially important when the robots, e.g., service robots, are sharing the workspace with human. This paper presents a flexible tactile sensor that was manufactured by direct writing technique, which is one of 3D printing method with multi-walled carbon nano-tubes. The signal processing system consists of two parts: analog circuits to amplify and filter the sensor output and digital signal processing algorithms to reduce undesired noise. Finally, experimental setup is implemented and evaluated to identify the characteristics of the flexible tactile sensor system. This paper showed that this type of sensors can detect the initiation and termination of contacts with appropriate signal processing.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.280-291
• /
• 1987

In this paper, the linear autoregressive model of EMG signal for four basic arm functions was presented and parameters for each function were estimated. The signal identification was carried out using function discrimination algorithm. It was validated that EMG signal was a widesense stationary process and the linear autoregressive model of EMG signal was constructed through approximating it to Gaussian process. It was confined that Levinson-Durbin algoridthm is a more appropriate one than the recursive least square method for parameter estimation of the linear model. Optimal function discrimination was acquired when sampling frequency was 500Hz and two electrodes were attached to bicep and tricep muscle, respectively. Parameter values were independent of variance and the number of minimum data for function discrimination was 200. Bayesian discrimination method turned out to be a better one than parallel filtering method for functional discrimination recognition.

• The Journal of the Acoustical Society of Korea
• /
• 제22권1E호
• /
• pp.33-42
• /
• 2003

Kuo et al proposed an on-line method for an adaptive prediction error filter for improving secondary path modeling performance in the modeling method of the secondary path. This method have some disadvantages, namely having to use additive noise with the result that noise control performance is not good since it is focused on the estimated performance of the secondary path. In this paper, we proposes a modified Kuo model using gain control parameter and delay. It uses a reference signal for additive noise to improve the problems in the existing Kuo model.

• 한국방사선학회논문지
• /
• 제15권1호
• /
• pp.1-7
• /
• 2021

양전자방출단층촬영기기에서 영상을 획득하기 위해서는 동시 측정된 검출기 모듈의 섬광 픽셀의 위치 좌표를 서로 연결하는 과정이 필요하다. 이를 위해서 다수의 섬광 픽셀과 소수의 광센서를 사용하는 검출기 모듈에서는 평면 영상을 획득하여 각 섬광 픽셀의 영역을 나누어 감마선과 상호작용한 섬광 픽셀의 위치를 획득해야 한다. 또는 사용하는 섬광 픽셀의 수와 광센서의 수를 동일하게 구성할 경우는 섬광 픽셀 위치에 대한 위치 좌표를 직접 디지털 신호 좌표로 획득할 수 있다. 다수의 섬광 픽셀과 소수의 광센서를 사용하는 방법은 평면 영상 획득과 영역을 나누는 과정이 필요하며, 디지털 신호 좌표를 직접 획득하는 방법은 다수의 광센서와 신호처리 시스템이 필요하다. 이는 신호처리 과정이 복잡해지며, 비용이 상승하는 문제가 발생한다. 이를 해결하기 위해 본 연구에서는 다수의 섬광 픽셀과 소수의 광센서를 사용하여 평면 영상 및 영역의 분리과정을 수행하지 않고 디지털 신호 좌표를 획득하는 방법을 개발하였다. 최대우도함수를 사용하여 각 섬광 픽셀에서 획득한 신호를 통해 작성된 순람표를 통해 감마선과 상호작용한 섬광 픽셀의 위치 좌표값을 디지털 신호로 획득하는 방법이다. DETECT2000을 사용하여 시뮬레이션을 실시하였으며, 제시한 방법에 대해 검증을 실시하였다. 그 결과 모든 섬광 픽셀에서 정확한 디지털 신호 좌표를 획득할 수 있었으며, 이를 기존 시스템에 적용할 경우 신호처리 과정의 단순화로 보다 빠른 영상획득이 가능할 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제16권5호
• /
• pp.92-99
• /
• 2008

This paper describes an signal processing method for the hall sensorless position control of ETC control system using a BLDC motor. The proposed ETC control system, which is mainly consisted of a BLDC motor, a throttle plate, a return spring and reduction gear, has a position sensor with an analog voltage output on the throttle valve instead of BLDC motor for detecting rotor position of motor. So the additional commutation information is necessarily needed to control the mentioned ETC module. In order to estimate and determine the commutation state, it is proposed to properly manipulate the resolution of A/D converter considering the mechanical parameter, that is, the number of motor slot and the ratio of reduction gear. Through this method, the estimation of commutation state for operating the system is possible and the discrete signal for commutation is stably obtained. The validity of the method is examined through the experimental results.