• 대한전자공학회논문지TE
• /
• 제39권1호
• /
• pp.46-54
• /
• 2002

정보 통신의 급속한 발전과 확산으로 전세계가 통신망으로 개방화되고, 정보 자체가 국가 경제 발전을 좌우하는 중요한 변수로 작용하게 되었다. 정보 보안은 특성상 각 국가마다 독단적인 정보보호시스템을 개발하여 독립적으로 그 비밀성을 유지해야 할 필요가 있다 이에 국내 암호 알고리즘의 활용 확대를 위해 국내 표준인 SEED 암호 알고리즘을 적용하여 Xilinx사 XCV300PQ240 칩을 타겟(target)으로 최대 동작 주파수 47.895MHz이고, 등가게이트는 27,285인 음성 암호화 칩을 설계하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권5호
• /
• pp.271-278
• /
• 2003

Power system stability is correlated with system structure, disturbances and operating conditions, and power flows on transmission lines are closely related with those conditions. This paper proposes a methodology to identify correlative power flows for power system transient and small-signal stability prediction. In transient stability sense, the Critical Clearing Time is used to select some dominant contingencies, and Transient Stability Prediction index is proposed for the quantitative comparison. For small-signal stability, this paper discusses a methodology to identify crucial transmission lines for stability Prediction by introducing a sensitivity factor based on eigenvalue sensitivity technique. On-line monitoring of the selected lines enables to predict system stability in real-time. Also, a Procedure to make a priority list of monitored transmission lines is proposed. The procedure is applied to a test system and the KEPCO systems in the year of 2003 and it shows capabilities of the proposed method

• Journal of the Korean Data and Information Science Society
• /
• 제16권3호
• /
• pp.639-650
• /
• 2005

Theoretical and numerical comparison have shown that variable sampling interval (VSI) charts are substantially more efficient than fixed sampling interval(FSI) charts in term of ATS(average time to signal). But the frequency of switching between different sampling intervals is a complicating factor in VSI procedures. VSI EWMA charts for monitoring mean vector of related qualify characteristics are investigated. To compare the efficiencies of the proposed charts, the performances are evaluated for matched FSI and VSI charts in terms of average time to signal(ATS) and average number of samples to signal(ANSS). For the switching behavior of the proposed VSI charts, average number of switches(ANSW) are also investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제4권1호
• /
• pp.45-61
• /
• 2010

In the communication channel, the received signal is affected by many factors that can cause errors. These effects mean that received signal strength (RSS) based methods incur more errors in measuring distance and consequently result in low precision in the location detection process. As one of the approaches to overcome these problems, we propose using direction calibration to improve the performance of the RSS-based method for distance measurement, and sequentially a weighted least squares (WLS) method using reliability factors in conjunction with a conventional RSS weighting matrix is proposed to solve an over-determined localization process. The proposed scheme focuses on the features of the RSS method to improve the performance, and these effects are proved by the simulation results.

• 전기학회논문지
• /
• 제58권7호
• /
• pp.1386-1392
• /
• 2009

An analysis is presented for super-high-speed optical demodulation by an avalanche photodiode(APD) with electric mixing. A normalized gain is defined to evaluate the performance of the optical mixing detection. Unlike previous work, we include the effect of the nonlinear variation of the APD capacitance with bias voltage as well as the effect of parasitic and amplifier input capacitance. As a results, the normalized gain is dependent on the signal frequency and the frequency difference between the signal and the local oscillator frequency. However, the current through the equivalent resistance of the APD is almost independent of signal frequency. The mixing output is mainly attributed to the nonlinearity of the multiplication factor. We show also that there is an optimal local oscillator voltage at which the normalized gain is maximized for a given avalanche photodiode.

• 대한음성학회지:말소리
• /
• 제57호
• /
• pp.153-164
• /
• 2006

The MMSE-STSA based speech enhancement algorithm is widely used as a preprocessing for noise robust speech recognition. It weighs the gain of each spectral bin of the noisy speech using the estimate of noise and signal power spectrum. In this paper, we investigate the influence of parameters used to estimate the speech signal and noise power in MMSE-STSA upon the recognition performance of noisy speech. For experiments, we use the Aurora2 DB which contains noisy speech with subway, babble, car, and exhibition noises. The HTK-based continuous HMM system is constructed for recognition experiments. Experimental results are presented and discussed with our findings.

• 통합자연과학논문집
• /
• 제13권3호
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
• /
• pp.51-54
• /
• 2002

As digital systems continue to use components with faster edge rate and clock speeds, transmission of the digital information can take place many troubles. The increasing requirement for controlled impedance PCBs becomes both a critical success factor and a design challenge. Especially, the noise sources in digital system include the noise in power supply, ground and packaging due to simultaneous switching of signal, signal reflections and distortions on single and multiple transmission lines. This paper simulates the tracks controlled impedance with the test coupon. So, it can saves the design time and supports the economical PCB design.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.266-270
• /
• 2006

Noise reduction the noise of a high precision multi-stage gearbox applied at the industrial robot is investigated by experiment such as the modal test and the signal analysis. The signal analysis performed with the waterfall plot representing the power spectrum as a function of the rotating speed. An eccentric load is installed at the gearbox in order to organize similar condition used in the industrial robot. Exciting sources are found out by the waterfall plot, and then the main factor to make the noise is distinguish. For the low-noise gearbox, the gear design parameter is modified and this gearbox is experimented in the same procedure. The results of the test show the noise level of gearbox reduced.

• Molecules and Cells
• /
• 제25권3호
• /
• pp.397-406
• /
• 2008

Computational modeling of signal transduction is currently attracting much attention as it can promote the understanding of complex signal transduction mechanisms. Although several mathematical models have been used to examine signaling pathways, little attention has been given to crosstalk mechanisms. In this study, an attempt was made to develop a computational model for the pathways involving growth-factor-mediated mitogen-activated protein kinase (MAPK) and phosphatidylinositol 3'-kinase/protein kinase B (PI3K/Akt). In addition, the dynamics of the protein activities were analyzed based on a set of kinetic data. The simulation approach integrates the information on several levels and predicts systems behavior. The in-silico analysis conducted revealed that the Raf and Akt pathways act independently.