• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.5
• /
• pp.624-631
• /
• 2012

This paper presents a high-efficiency current mode class-D(CMCD) power amplifier for the 13.56 MHz band using a Guanella's 1:1 transmission-line transformer and filtering circuits at the output network. The second and third s are filtered out in the load network of the class-D amplifier. The implemented CMCD power amplifier exhibited a power gain of 13.4 dB and a high power-added efficiency(PAE) of 84.6 % at an output power of 44.4 dBm using the 13.56 MHz CW input signal. The second and third distortion levels were -50.3 dBc and -46.4 dBc at the same output power level, respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.219-226
• /
• 2000

In this paper, we design and implement a IF(intermediate frequency) module for WLL(wireless local loop) CDMA(code division multiple access) basestation. The implemented IF transceiver is consists of transmitter, receiver and local oscillator. The considered signal bandwidth is 10 MHz and the local carrier frequency is 40 MHz. As test results, the If transmitter output power is -5dBm $\pm3dB$when the baseband input is -10dBm $\pm3dB$, and the IF receiver output power is -10dBm $\pm3dB$when the IF input is -5dBm $\pm3dB$. Also the AGC(automatic gain control) circuit has dynamic range of 9 dB from -7dBm to +2dBm with output power 2dBm. And the group delay characteristic is analyzed by comparing the phase delay from 1 MHz to 5 MHz and the phase distortion is very low. We can conclude that this IF system can be applied to high speed data rate communication system.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.5
• /
• pp.1073-1080
• /
• 2011

In this paper, we propose a novel digital watermarking method by virtual optics which secures multimedia information such as images, videos and sounds. To secure the multimedia data, we use Fresnel transform which describes the diffraction phenomena of the waves. Also, this method attaches the random phase function to Fresnel transform so that original image and watermark image would be gaussian random vectors. The complex numbers of watermark by Fresnel transform are separated the real part and the imaginary part. The former is embedded in original image as a encoding key imperceptibly and the latter is used for detecting the watermark as a decoding key. This method for digital watermarking ensures that watermark can be successfully registered and extracted from the watermarked image. Further, it provides the robustness to signal processing operation and geometric distortion and proves the strong resilience against cropping attack. The performance evaluation of the experiment is carried out with PSNR, and the numerical simulation results show the efficiency of the proposed method.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.12
• /
• pp.2618-2624
• /
• 2009

Harmonics (or distortion in wave form) has always existed in electrical power systems. It is harmless as long as its level is not substantial. However, with the recent rapid advancement of power electronics technology, so-called nonlinear loads, such as variable frequency drives for motor power/speed control, are increasingly finding their way to shipboard or offshore applications. In this paper a new approach to direct torque control (DTC) of induction motor drive is presented. In comparison with the conventional DTC methods the inverter switching frequency is constant and is dramatically increased, requiring neither any increase of the sampling frequency, nor any high frequency dither signal. The well-developed space vector modulation technique is applied to inverter control in the proposed DTC-based induction motor drive system, thereby dramatically reducing the current harmonics. As compared to the existing DTC approach with constant inverter switching frequency, the presented new approach does not invoke any concept of deadbeat control, thereby dramatically reducing the computations.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.6
• /
• pp.545-554
• /
• 2000

Compton X-ray backscatter technique has been used to quantitatively assess the impact damage in quasi-isotropic laminated composites and to obtain a cross-sectional profile of impact-damaged laminated composites from the density variation of the cross section. An adaptive filter is applied to the Compton backscattering data for the reconstruction and noise reduction from many sources including quantum noise, especially when the SNR(signal-to-noise ratio) of the image is relatively low. A nonlinear reconstruction model is also proposed to overcome distortion of the Compton backscatter image due to attenuation effects, beam hardening, and irregular distributions of the fibers and the matrix in composites. Delaminations masked or distorted by the first few delaminations near the front surface are detected and characterized both in width and location, by application of an error minimization algorithm.

• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.115-120
• /
• 2008

The thermistors and AD590 are widely used for temperature measurement in space application. The resistance of thermistor will vary according to the temperature variation therefore the external voltage or current stimulus signal have to be provided to measure resistance variation. Recently high resolution electro optic camera system of satellite requires tight thermal control of the camera structure to minimize the thermal structural distortion which can affects the image quality. In order to achieve $1^{\circ}$(deg C) thermal control requirement, the accuracy of temperature measurement have to be higher than $0.3^{\circ}$(deg C). In this paper, the accuracy of temperature measurement using thermistors is estimated and analyzed.

• KSCI Review
• /
• v.2 no.1
• /
• pp.55-67
• /
• 1995

Recently, it is possible to high speed transmission of the non-voiced data, including voice, data, moving image instead of voice only in the past by changing the communication method to digital form from analog owing to the development of semiconductor and computer technology which for information transmission of the remote point. By doing so, we can get the improvement of the noise effect and low cost but the loss of transmission bandwidth. It is necessary to take some method in oreder to reducing the fading which is propotional to transmission bandwidth during the transmission of radio communication channel, especially. When we design the digital communication system, we must considered to the fading effect in order to determination of the transmitting power, modulation /demodulation method, transmission speed, bit error rate. This paper mainly concerns to the method to the channel simulator which descrives the fading effect during the transmission by computer model and digital filter modeling of the radio fading channel by unsing the transmitting and received signal. By taking the inverse of the characteristic of the modeled filter, it is possible to improvement of the communication system by reducing the distortion and inter-symbol interference which occurs in the channel.

• Phonetics and Speech Sciences
• /
• v.12 no.4
• /
• pp.73-80
• /
• 2020

In this study, a method for measuring the jitter component in continuous speech is presented. In the conventional jitter measurement method, pitch variabilities are commonly measured from the sustained vowels. In the case of continuous speech, such as a spoken sentence, distortion occurs with the existing measurement method owing to the influence of prosody information according to the sentence. Therefore, we propose a method to reduce the pitch fluctuations of prosody information in continuous speech. To remove this pitch fluctuation component, a curve representing the fluctuation is obtained via polynomial interpolation for the pitch track in the analysis interval, and the shift is removed according to the curve. Subsequently, the variability of the pitch frequency is obtained by a method of measuring jitter from the trajectory of the pitch from which the shift is removed. To measure the effects of the proposed method, parameter values before and after the operations are compared using samples from the Kay Pentax MEEI database. The statistical analysis of the experimental results showed that jitter components from the continuous speech can be measured effectively by proposed method and the values are comparable to the parameters of sustained vowel from the same speaker.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.22-28
• /
• 2022

In order to install ultra wide band and ultra long-haul transmission link based on standard single mode fiber, optical signal distortion due to chromatic dispersion and nonlinear Kerr effect must to be compensated. In this paper, optical link consisted of dispersion management and optical phase conjugation is proposed for compensation of the distorted wavelength division multiplexed (WDM) channels. Dispersion map profile in the proposed dispersion-managed link is configured by periodic repetitive shape, and optical phase conjugator is placed at various position including the midway of total transmission length. It is confirmed from simulation results that when the residual dispersion per span (RDPS) selected in the proposed dispersion-managed link to be large, the compensation of distorted WDM channels in the non-midway OPC system is more improved than the conventional dispersion-managed link.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.5
• /
• pp.649-655
• /
• 2022

In this paper, a determinant-based two-channel noise reduction method which utilizes speech presence probability (SPP) is proposed. The proposed method improves noise reduction performance from the conventional determinant-based two-channel noise reduction method in [7] by applying SPP to the Wiener filter gain. Consequently, the proposed method adaptively controls the amount of noise reduction depending on the SPP. For performance evaluation, the segmental signal-to-noise ratio (SNR), the perceptual evaluation of speech quality, the short time objective intelligibility, and the log spectral distance were measured in the simulated noisy environments considered various types of noise, reverberation, SNR, and the direction and number of noise sources. The experimental results presented that determinant-based methods outperform phase difference-based methods in most cases. In particular, the proposed method achieved the best noise reduction performance maintaining minimum speech distortion.