• 한국IT서비스학회:학술대회논문집
• /
• 한국IT서비스학회 2005년도 추계학술대회
• /
• pp.448-456
• /
• 2005

본 기고에서는 삼성SDS 컨설팅본부에서 새로 개발한 PFSS(PI for Six Sigma) 에 대해서 소개하고 PFSS방법론을 통해 프로세스 혁신(PI: Process Innovation)을 수행할 시 기대되는 효과에 대하여 알아본다. 우선 PFSS의 정의, 등장 배경 및 필요성에 대해서 논하였다. 그리고, PFSS 방법론의 Roadmap을 소개하고 Define - Measure - Analyze - Design - Optimize - Verify의 6개의 Phase에 대하여 알아본다. 마지막으로 PFSS의 장점 및 기대효과와 향후의 PFSS의 발전 방향에 대해 논하였다. 본 기고를 통해 기존의 프로세스 혁신 방법론과 6시그마 방법론이 어떻게 융합하여 상호 강점을 활용할 수 있는지를 살펴 볼 수 있는 기회가 되었으면 한다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제7권1호
• /
• pp.79-90
• /
• 1983

The examination for the changes of structures and mechanical properties in directionally solidified Al-Fe-Ni alloys containing the small amount of Fe and Ni was carried out by the varying the composition and solidification rate R of alloy, provided that the temperature gradient was 80 .deg.C/cm. The result were obtained as follows. A) In proportion to the increase of the solidification rate (R), the crystallized phase of this alloy was changed from the Ribbon-type structure to the Rod-type structure. B) The strength was rapidly increased in the changing process of composite shape from the Ribbon-type to the Rod-type with the solidification rate (R) increasing. C) The fiber stress (${\sigma}^f$) and Young's modulus ($E_f$) calculated for the Rod-type structure were 220 kg/$mm^2$ and 11, 800 kg/$mm^2$ respectively, which were in good accord with the rule of Mixtures.

• Bulletin of the Korean Chemical Society
• /
• 제21권12호
• /
• pp.1187-1192
• /
• 2000

Ternary (Mo-Ru-Pd) and binary (Mo-Ru, Mo-Pd) alloys have been prepared using an Ar arc melting furnace. Mo and the noble metals, Ru and Pd, are the constituents of metallic insoluble residues, which were found in the early days of post-irradiation studies on uranium oxide fuels. In the present study, the structure of the alloys was evaluated using a powder X-ray diffractometer. Unit cell parameters were determined by least squares refinements of powder X-ray diffraction data. Scanning electron microscopic analyses of the surface of the alloys indicated that surface morphology was dependent on the crystallographic structure as well as its composition. Measurements of the magnetic susceptibility of the alloys showed evidence of superconducting transition from 3 to 9.2 K. Among the ternary and binary alloys, the ${\sigma}-phase$ showed the highest superconducting transition temperature,~9.2 K.

• Bulletin of the Korean Chemical Society
• /
• 제19권5호
• /
• pp.533-539
• /
• 1998

A magnetic film was deposited on a slide glass substrate from aqueous solutions of $FeCl_2$ and $NaNO_2$ at 363 K. XRD analysis showed that the film was polycrystalline magnetite $(Fe_{3(1-{\sigma})}O_4)$ without impurity phase. The lattice constant was 0.8390 nm. Mossbauer spectrum of the film could be deconvoluted by the following parameters: isomer shifts for tetrahedral $(T_d)$ and octahedral $(O_h)$ sites are 0.28 and 0.68 mm/s, respectively, and corresponding magnetic hyperfine fields are 490 and 458 kOe, respectively. The estimated chemical formula of the film by the peak intensity of Mossbauer spectrum was $Fe_{2.95}O_4$. Low temperature transition of the magnetite (Verwey transition) was not detected in resistivity measurement of the film. Properties of the film were discussed with those of pressed pellet and single crystal of synthetic magnetites. On the surface of the film, magnetite particles of about 0.2 μm in diameter were identified by noncontact atomic force microscopy (NAFM) and magnetic force microscopy (MFM).

• Bulletin of the Korean Chemical Society
• /
• 제18권2호
• /
• pp.208-212
• /
• 1997

Theoretical AM1 MO studies are reported on the gas-phase deprotonations of N-methyl 4-((Y-phenylsulfonyl)pyridinium cations (Ⅳ) and N-(Y-benzyl) 4-((phenylsulfonyl)methyl pyridinium cations (Ⅴ) using NH3 as a base. Bronsted α values for deprotonation of Ⅳ and Ⅴ are 0.18 and 0.17, respectively. Bronsted β value of 0.53 is found for the deprotonation of Ⅳ and Ⅴ by substituted aniline bases. The negative transition state (TS) imbalances, Ⅰ(=α-β) < 0, are rationalized by the negative distance factor, Δd (=dp-dTS) < 0, where dp and dTS are the distance between anionic charge center and substituents in the product and in the TS, respectively. The inability of d-pπ-conjugation in Ⅳ, where instead n-σ* type sigma delocalization occurs, causes very little lag in the structural reorganization in the TS.

• 한국생명과학회:학술대회논문집
• /
• 한국생명과학회 2000년도 제28회 학술심포지엄
• /
• pp.3-8
• /
• 2000

The complete genome sequence of a Gram-positive bacterium .Bacillus subtilis has recently been reported and it is now clear that more than 50% of its ORFs have no known function (1). To study the global gene expression in B. subtilis at single gene resolution, we have tested the glass DNA microarrays in a step-wise fashion. As a preliminary experiment, we have created arrays of PCR products for 14 ORF whose transcription patterns have been well established through transcriptional mapping analysis. We measured changes in mRNA transcript levels between early exponential and stationary phase by hybridizing fluorescently labeled cDNA (with Cy3-UTP and Cy5-UTP) onto the array. We then compared the microarray data to confirm that the transcription patterns of these genes are well consistent with the known Northern analysis data. Since the preliminary test has been successful, we scaled up the experiments to ${\sim}$94% of the 4,100 annotated ORFs for the complete genome sequence of B. subtilis. Using this whole genomic microarray, we searched genes that are catabolite-repressive and those that are under the control of ${\sigma}^{Y}$, one of the functionally unknown ECF sigma factors. From these results, we here report that we have established DNA microarray techniques that are applicable for the whole genome of B. subtilis.

• 한국주조공학회지
• /
• 제26권2호
• /
• pp.77-84
• /
• 2006

The effect of alloy composition on the glass forming ability (GFA) of the Ca-rich Ca-Mg-Zn alloys has been investigated in $Ca_{65}Mg_{5+x}Zn_{30-x}$ and $Ca_{55+x}Mg_{15}Zn_{30-x}$ (x=0, 5, 10, 15, 20) alloys. In a wide composition range of 15-25% Zn and 10-20% Mg bulk metallic glass (BMG) samples with the diameter larger than 6 mm are fabricated by conventional copper mold casting method in air atmosphere. Among the alloys investigated, the $Ca_{65}Mg_{15}Zn_{20}$ alloy exhibits the highest GFA enabling to form BMG sample with the diameter of at least 15 mm. The crystalline phase formed during solidification of $Ca_{65}Mg_{15}Zn_{20}$ ($D_{max}=15\;mm$) could be identified as a mixture of $Ca_3Zn$ and $CaMg_2$ cause by the redistribution of the constituent elements on long-range scale. The compressive fracture strength and fracture elongation of the $Ca_{65}Mg_{15}Zn_{20}$ BMG are 602 MPa and 2.08% respectively. The ${\sigma}$ parameter which has been recently proposed for evaluating GFA exhibits better correlation with GFA of Ca-Mg-Zn alloys than other parameters suggested so far such as ${\Delta}T_x$, $T_{rg}$, K, ${\gamma}$, and ${\Delta}T^*$ parameters.

• 한국광학회지
• /
• 제7권4호
• /
• pp.434-439
• /
• 1996

본 연구에서는 가우스 진폭을 갖는 입사광의 단락된 정도와 광학 디스크 상의 bump의 형태가 재생신호에 미치는 영향과 디스크 bump에 맺히는 회절광 PSF(point spread function)와의 관계를 알아보기 위해 스칼라 회절 이론을 사용하였다. 단락된 가우스 진폭으로 .sigma.=0, 0.5, 1.5, 2.5인 경우를 고려하였으며 bump의 높이는 n.DELTA.$_{o}$ =.lambda./4로서 이는 위상 높이 .PHI.$_{o}$ =.pi.가 된다. 또한 본 연구에서 고려한 bump 형태 즉 직사각형(.DELTA.p$_{o}$ =0)과 준 원추형(.DELTA.p$_{o}$ /2) 그리고 원추형(.DELTA.p$_{o}$ =p$_{o}$ )의 세 가지 경우이다. 본 연구에서 고려한 입사광의 단락된 정도가 작을 수록 bump에 맺는 중심 회절상의 반경이 작게 나타났으며 이때 재생 신호의 극대치는 입사광의 단락된 정도가 작을수록 bump에 맺는 중심 회절상의 반경이 작계 나타났으며 이때 재생 신호의 극대치는 입사광의 단락된 정도가 큰 경우보다 크게 나타났고 bump의 크기도 작게 나타났다. 이러한 결과들로부터 입사광의 단락된 정도가 작을수록 광학 디스크로부터 큰 재생 신호를 얻을 수 있으며 cross-talk가 줄어듬을 알 수 있었다. 그러므로 실제 광학 디스크에 가능한 단락된 정도가 작은 가우스 진폭을 갖는 레이저 광을 입사광으로 사용하면 유용하리라 생각된다.

• 공업화학
• /
• 제8권3호
• /
• pp.416-424
• /
• 1997

본 연구에서는 고밀집 섬유체에 의한 정적 액-액 접촉기에 대한 이론적 모델링을 통하여 섬유체 접촉기 내부에서의 물질 이동과정과 각 상에서의 축 방향 농도분포 해석이 수행되었고, 여러 운전 조건하에서 출구 농도를 예측하여 실험치와 비교하였다. 본 섬유체 액-액 추출기는 그 구조적 특성 때문에 축 방향 분산이 없는 플러그 흐름 모델로 완벽하게 묘사될 수 있었으며 data fitting을 통해 결정되어 모델식에 적용된 물질전달 계수와 섬유체 추출기 축 방향 반위 길이 당 물질전달 면적의 곱의 항인 $k_a{\sigma}$은 그 섬유체 추출기의 고유 특성 값으로 사용될 수 있었고, 그 값은 약 0.0327cm2/sec이었다.

• 전자공학회논문지
• /
• 제53권12호
• /
• pp.57-63
• /
• 2016

본 논문은 $0.18{\mu}m$ 실리콘 CMOS 기술을 이용한 IEEE802.15.4g SUN 체계의 센서노드 무선통신부에 적용할 수 있는 RF 주파수 합성기의 구현에 대하여 기술하였다. 제안한 주파수 합성기는 고속 저잡음 특성을 얻기 위하여 VCO, 프리스케일러, 1/N 분주기, ${\Delta}-{\Sigma}$ 모듈레이터 그리고 PLL 공통 회로 등의 설계 최적화가 이루어졌으며, 특히 VCO는 NP 코어 구조와 13단 캡 뱅크를 각각 적용하여 고속, 저잡음 및 광대역 튜닝 범위를 확보하였다. 제안된 주파수 합성기를 칩으로 제작하여 측정한 결과 출력 주파수 범위는 1483MHz~2017MHz, 위상잡음은 100KHz 오프셋에서는 -98.63dBc/Hz, 1MHz 오프셋에서는 -122.05dBc/Hz로 양호한 특성을 얻을 수 있었다.