• JSTS:Journal of Semiconductor Technology and Science
• /
• 제16권3호
• /
• pp.319-329
• /
• 2016

High-level design aids are mandatory for design of a continuous-time delta-sigma modulator (CTDSM). This paper proposes a top-down methodology design to generate a noise transfer function (NTF) which is compensated for excess loop delay (ELD). This method is applicable to low pass loop-filter topologies. Non-ideal effects including ELD, integrator scaling issue, finite op-amp performance, clock jitter and DAC inaccuracies are explicitly represented in a behavioral simulation of a CTDSM. Mathematical modeling using MATLAB is supplemented with circuit-level simulation using Verilog-A blocks. Behavioral simulation and circuit-level simulation using Verilog-A blocks are used to validate our approach.

• 전기학회논문지P
• /
• 제52권4호
• /
• pp.148-153
• /
• 2003

In this paper, the low voltage 3V Sigma-Delta Digital Analog Converter(DAC) is designed for using in the transmitter of ADSL analog front-end. We have developed the CMOS DAC according to ANSI T1.413-2(DMT) standard specifications of the chip. The designed 4th-order DAC is composed of three block which are 1-bit DAC, 1st-order Switched-Capacitor filter and analog active 2nd-order Resistor-Capacitor(RC) filter. The HSPICE simulation of the designed DAC showing 65db SNR, is connected with 1.1MHz continuous lowpass filter. And also, we have performed the circuits verification and layout verification(ERC, DRC, LVS) followed by fabrication using TSMC 2-poly 5-metal p-substrate CMOS $0.35{\mu}m$ processing parameter. Finally, the chip testing has been performed and presented in the results.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제53권2호
• /
• pp.111-117
• /
• 2004

The low-power design of the A/D converter is indispensable to achieve the compact bio-signal measuring device with long battery duration. In this paper, new decimation filter structure is proposed for the low-power design of the Sigma-Delta A/D converter in the bio-instruments. The proposed filter is based on the non-recursive structure of the CIC (Cascaded Integrator Comb) decimation filter in the Sigma-Delta A/D converter. By combining the CSD (Canonic Signed Digit) structure with common sub-expression sharing technique, the proposed decimation filter structure can significantly reduce the number of adders for implementation. For the fixed decimation factor of 16, the 15％ of power consumption saving is achieved in the proposed structure in comparison with that of the conventional polyphase CIC filter.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.196-198
• /
• 2008

본 논문에서는 강압형 DC-DC 컨버터의 성능 개선을 위한 스위칭 기법인 2차 SDSDM(Space Dithered Sigma-Delta Modulation)방식을 제안한다. PWM 방식은 일정 스위칭 주파수 대역에서의 고조파로 인해 소음, 전자파 장애, 스위칭 손실 등을 초래한다. 이러한 문제를 해결하기 위한 DSDM 방식의 일종인 1차 SDSDM은 랜덤 디더(Random Dither) 발생기가 1차 SDM의 양자화기(quatizer) 입력 단에 위치하여 스위칭 주파수가 분산된다. 강압형 DC/DC 컨버터에 제안하는 2차 SDSDM의 방식을 적용한 실험 결과를 통해 타당성을 검증한다.

• ETRI Journal
• /
• 제45권1호
• /
• pp.150-162
• /
• 2023

The polar delta-sigma modulator (DSM) transmitter architecture exhibits good coding efficiency and can be used for software-defined radio applications. However, the necessity of high clock speed is one of the major drawbacks of using this transmitter architecture. This study proposes a low-complexity timeinterleaved architecture for the polar DSM transmitter baseband part to reduce the clock speed requirement of the polar DSM transmitter using an upsampling technique. Simulations show that using the proposed four-branch timeinterleaved polar DSM transmitter baseband part, the clock speed requirement of the transmitter is reduced by four times without degrading the signal-tonoise-and-distortion ratio.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.18-24
• /
• 2002

This study verified the relationship between fracture mechanics parameters(${\Delta}K,\;K_{max}$) and X-ray parameters ($(\sigma}_r,;B$) for G365 steel at elevated temperature up to $300{\circ}C$. The fatigue crack propagation test were carried out and X-ray diffraction technique according to crack length direction was applied to fatigue fractured surface. The residual stress on the fracture surface was found to increase in low ${\Delta}K$ region, reach to a maximum value at a certain value of $K_{max}$ or ${\Delta}K$ and then decrease. Residual stress was independent on stress ratio by arrangement of ${\Delta}K$ and half value breadth was independent by the arrangement of $K_{max}$. The equation of ${\sigma}_r-{\Delta}K$ was established by the experimental data. Therefore, fracture mechanics parameters could be estimated by the measurement of X-ray parameters.

• 대한수학회논문집
• /
• 제10권4호
• /
• pp.881-887
• /
• 1995

Let f be a measurable function on the unit ball B in $C^n$, then we define a maximal function $M_p(f), 1 \leq p < \infty$, by $$ M_p(f)(\zeta ) = \sup_{\delta > 0}(\frac{1}{\sigma(\beta(\zeta, \delta))} \int_{T(\beta(\zeta, \delta))} $\mid$f(z)$\mid$^p \frac{d\nu(z)}{(1-$\mid$z$\mid$^n})^{1/p} $$ where $\sigma$ denotes the surface area measure on S, the boundary of B, and $T(\beta(\zeta, \delta))$ denotes the tent over the ball $\beta(\zeta, \delta)$. We prove that the maximal operator $M_p$ belongs to the Muckenhoupt class $A_1$.

• 한국자동차공학회논문집
• /
• 제7권8호
• /
• pp.248-261
• /
• 1999

The fatigue life of mechanical components and structures has been influenced by mechanical, material and environmental conditions. It is important to search out the load type and size for accurate cause of fracture at the damaged surface of material. The fractographic method by x-ray diffraction can utilize residual stress $\sigma$_r and half-value breadth B and find out the types and the mechanical conditions of fracture. This study showed the relationship between fracture mechanical parameters $\Delta$K, $K_{max}$ and X-ray residual stress $\sigma$_r for normalized SS41 steel with homogeneous crystal structure and M.E.F. dual phase steel(martensite encapsulated islands of ferrite). The fatigue crack propagation tests were carried out under stress ratios 0.1 and 0.5. The x-ray diffraction technique according to crack propatation direction was applied to fatigue fractured surface. Residual stress $\sigma$_r was independent on stress ratios by arrangement of $\Delta$K. The equation of $\sigma$_r$\Delta$K was established by the experimental data. Therefore, fracture mechanical parameters can be estimated can be estimated by the measurement of X-ray parameters.

• 대한화학회지
• /
• 제15권3호
• /
• pp.147-152
• /
• 1971

On the baisis of the calculations by the two centre Huckel method for sigma electron system, the electronic structure of the various aliphatic amines including ammonia, and the relationship between the observed $pK_b$ and the change in the sigma electronic energy, ${\Delta}E{\sigma}$ in the course of protonation are discussed. A parallelism is observed between the $pK_b$ and the calculated ${\Delta}E{\sigma}$ of the amines. Also, it is observed that the electron densities of hydrogen atom directly bonded to nitrogen of the amines, likewise have a linear relationship with the $pK_b$. Therefore, the basicity of the aliphatic amines may be estimated qualitatively by means of the two center Huckel method.

• 대한수학회논문집
• /
• 제27권4호
• /
• pp.721-732
• /
• 2012

The principal aim of the paper is to investigate new integral expression $${\int}_0^{\infty}x^{s+1}e^{-{\sigma}x^2}L_m^{(\gamma,\delta)}\;({\zeta};{\sigma}x^2)\;L_n^{(\alpha,\beta)}\;({\xi};{\sigma}x^2)\;J_s\;(xy)\;dx$$, where $y$ is a positive real number; $\sigma$, $\zeta$ and $\xi$ are complex numbers with positive real parts; $s$, $\alpha$, $\beta$, $\gamma$ and $\delta$ are complex numbers whose real parts are greater than -1; $J_n(x)$ is Bessel function and $L_n^{(\alpha,\beta)}$ (${\gamma};x$) is generalized Laguerre polynomials. Some integral formulas have been obtained. The Maple implementation has also been examined.