• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.04b
• /
• pp.47-47
• /
• 2009

The formation of variable one-dimensional structures including core/shell structure is of particular significance with respect to potential applications for thermoelectric devices with the enhanced figure of merit ($ZT=S2{\sigma}T/{\kappa}$). We report the fabrication of Bi-Te core/shell nanowire based on a novel stress induced method. Fig. 1 schematically shows the nanowire fabrication process. Bi nanowires are grown on the Si substrate by the stress-induced method, and then Te is evaporated on the Bi nanowires. Fig. 2 is a transmission electron microscopy image clearly showing a core/shell structure for which effective phonon scattering and quantum confinement effect are expected. Electrical conductivity of the core/shell nanowire was measured at the temperatures from 4K to 300K, respectively. Our results demonstrate that Bi-Te core/shell nanowire can be grown successfully by the stress-induced method. Based on the result of electrical transport measurement and characteristic morphology of rough surface, Seebeck coefficient and thermal conductivity of Bi-Te core/shell nanowires are presented.

• Transactions on Electrical and Electronic Materials
• /
• v.18 no.6
• /
• pp.311-315
• /
• 2017

The perovskite system $(Ba^{2+}{_{1-x}}La^{3+}{_x})Fe^{3+}{_{1-t}}Fe^{4+}{_t}O_{3-y}$ (y = (1 - x --t)/2) having a composition of x = 0.0, 0.1, 0.2, and 0.3 showedean increase in $Fe^{4+}$ mole ratios with an increase in oxygen partial pressure ($N_2{\rightarrow}air{\rightarrow}O_2$), and with an increasefin s, the $Fe^{3+}$ quantity decreased and oxygen content (3-y value) increased. For each N sampls heat-treated in $N_2$ gas, a considerable weight gain, i.e.g a steadynincrease if oxygen content, was observed in the TGA data on the cooling process. The conductivity values at a constant temperature were in the order of $N_2$$O_2$; the respective log ${\sigma}$ values (${\Omega}^{-1}{\cdot}cm^{-1}$) at 323 K of the BL0 sample were -5.75 (BL0-N), -3.39 (BL0-A), and -0.53 (BL0-O). The mixed valencies of $Fe^{3+}$ and $Fe^{4+}$ ions in each sample were also confirmed by both the oxidation curve above 350 mV and the cathodic reduction curve below 200 mV from cyclic voltammetry.

• Journal of the Korean Institute of Navigation
• /
• v.21 no.3
• /
• pp.67-74
• /
• 1997

This paper described the method and the result of making a dynamic fiber optic gyrocompass measuring the heading angles of ships by processing the output signal from a constant rotating fiber optic sensor and also showed the measurement to test the performance of our system. Considerig an economical view we designed and ordered a cheap medium grade fiber densors increased not fiber length but the diameter of a fiber sensing loop. The scale factor and noise was 267mV/deg/s and 2 deg/hr/$\sqrt{Hz}(1{\sigma})$, respectively. We made the dynamic fiber optic gyrocompass by this sensor. We measured the heading angles in an arbitrary direction to evaluate the accuracy of our system and the root mean square error was $0.4^\circ$. Moreover, we measured the angles ineach direction of $45^\circ$. successive rotation to know whether this system has distoritions in a specific direction or not and the root mean square error in this case was $0.5^\circ$.

• International Journal of Quality Innovation
• /
• v.6 no.2
• /
• pp.59-89
• /
• 2005

Manufacturing Resources Planning (MRPII) is one kind of manufacturing information system that can help manufacturing companies gain competitive advantages. It is estimated that more than one hundred MRPII systems are available in the market, many of them are mature enough to solve most operational issues in accordance with users' requirements. More often than not, many of these systems provide more functions than a company expects. Manufacturing companies worldwide have attempted to implement these MRPII systems, however, many companies experienced failure (Turbide, 1996) due to managerial rather than technical issues. The authors propose an approach utilising a roadmap to integrate BPR and the MRPII implementation in order to overcome this difficulty. A detail road map is developed to guide this implementation, which is designed using a hierarchical analysis technique known as Integrated DEFinition Method (IDEF). IDEF is a systematic manufacturing management and integration-modeling tool. The proposed approach is implemented and illustrated using a reference company and the results indicated that 66% reduction in errors for maintaining the bills of materials system; 99% reduction in time to carry out material requirement planning; and 70% reduction in time previously taken for non-productive discussions.

• Toxicological Research
• /
• v.17 no.4
• /
• pp.273-277
• /
• 2001

Though the bamboo salt, called as "JUKYUM" has been widely used in Korea as panacea, it's toxicity were not screened completely. To investigate the toxicity of bamboo salt, we compared with the toxicity of crude salt and reagent-grade NaCl by performing single dose oral toxicity test in SD rats. Crude salt, natural sun-dried salt (crude salt) production, was purchased from the western seashore of Korean peninsular, and reagent-grade NaCl was purchased from Sigma company. Results of the single dose oral toxicity tests on bamboo salt, crude salt and reagent-grade NaCl to SD rats are as follows, $LD_{50}$ of bamboo salt was 4174mg/kg (male) and 4074mg/kg (female), that of crude salt was 4871mg/kg (male) and 4898mg/kg (female) and that of reagent-grade NaCl was 4247mg/kg (male) and 4025mg/kg (female), respectively. There were little differences in clinical signs and gross legions among groups. Finding of gross autopsy and necropsy of bamboo salt treated group were similar to other groups.er groups.

• Journal of Microbiology
• /
• v.34 no.1
• /
• pp.15-22
• /
• 1996

The cloned X-bacterial gene (groEx) which is analogous to groE of E. Coli strongly expressed in E. coli when grown at the temperature 27.deg. C or higher without having to add any inducers. By S1-nuclease mapping, primer extension analysis and site directed mutagenesis, we found 4 promoters in the gene. Among them two promoters located at 5'-extended region of the gene are homologous to the promoters found in groE family of heat-shock genes ; they are , .sigma.$^{32}$ factor-dependent P1 promotor and .delta$^{70}$factor-dependet P2 promoter. The other two promoters found within the coding region of groESx were P3, 5'-TTGGCG-(18 bases)-AATACT-3' and P4, 5'-TTGGCA-(19 bases)-TAAGT which overlapped within 49 bases. These unique intragenic .delta.$^{70}$-dependent promoters are the first to be cloned and characterized in groE analogous heat-shock genes so far. These P3 and P4 promoters appeared to be responsible for the strong expression of GroElx in X-bacteria in vivo.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.8
• /
• pp.24-32
• /
• 2006

Using a deterministic design optimization, the effect of uncertainty can result in violation of constraints and deterioration of performances. For this reason, design optimization is required to guarantee reliability for constraints and ensure robustness for an objective function under uncertainty. Therefore, this study drew Monte Carlo Simulation(MCS) for the evaluation of reliability and robustness, and selected an artificial neural network as an approximate model that is suitable for MCS. Applying to the aero-structural optimization problem of aircraft wing, we can explore robuster optima satisfying the sigma level of reliability than the baseline.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.27-32
• /
• 2015

In order to protect occupant during car crash accident, Regulation and NCAP(New Car assessment Program) have been developed among various countries like U.S.A., Europe, Korea and Australia. Especially NCAP scores affect to sales of vehicles. So vehicle makers are trying to get good score in NCAP. Low leg injuries play an important role in Australia and Euro NCAP and these injuries are related with footrest design. Optimization of footrest design in early stage of vehicle development is necessary to obtain better and robust results of low legs during crash tests. In this paper, DFSS method and finite element model were used to optimize the low leg performance in small RHD vehicles. Compared with the lower leg injury of base model, the lower leg injury of proposed model was slightly improved and robustness was enhanced also.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.35-38
• /
• 2004

Global competitive pressures are asking industrial companies to find the best way to meet their customer's requirements, reduce the costs of products, and increase productivity. Quality improvement has been proposed and implemented as a primary means of achieving these purposes. The quality improvement usually includes a goal of reducing the costs due to poor quality. While these costs of poor quality (COPQ) are not known precisely, they are known to be very high. Also, they may be underestimated by the hidden costs due to non-value activities, such as potential lost sales, costs of redesign due to quality reasons, and extra manufacturing costs due to defects, etc. In any manufacturing or service operation, all actions and resource expenditures of a company should be focused on creating value for customers. Any activity or resource of not creating the value for customers could be regarded as waste, which consequently causes the COPQ. Some companies did use dashboards to understand and identify value added or non-value added activities in order to reduce or eliminate wastes. These dashboards must be properly designed to consider inherent differences in manufacturing or service operations among business organizations. In addition, a structured quality improvement program such as the Six Sigma must support these dashboards. In this paper, a case study of designing dashboards for evaluating and reporting the COPQ in business units is presented.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.4
• /
• pp.209-218
• /
• 2008

The growth in services has focused issues of service quality both for commercial enterprises and across a range of public services and government institutions. The education sector, in particular, has undergone radical change to meet the needs of its varied constituents. This paper examines key issues in internal service, customer satisfaction, service quality, relational commitment as they apply in one particular education sector. The purpose of this study is to analyze effect of internal service on customer satisfaction, educational service quality. First, In the dimension of internal service, many factors affect internal customer's evaluation for overall satisfaction. They are categorized as five factors; tangibles, reliability, responsiveness, assurance, empathy. The results of this study supported the proposed conceptual framework overall. Therefore, we identified that internal service quality is the antecedent of an internal customer satisfaction, and the consequent variables of an internal customer satisfaction are educational service quality, external customer satisfaction. The major findings of this study are summarized as follows. First, some factors(tangibles, reliability, responsiveness, assurance, empathy) affected positively internal customer satisfaction. Second, external service quality affected positively educational service quality, external satisfaction. In other words, the more internal customers have experienced internal service, the higher internal service quality deliver educational service quality.