• Journal of Korean Society for Atmospheric Environment
• /
• v.16 no.3
• /
• pp.237-246
• /
• 2000

An experimental study has been carried out using a rotating water channel in order to investigate the effect of surface roughness on the vertical dispersion of plume within boundary layer. Dispersion measurements of tracers released from two sources with different height at neutral conditions over various rough terrain ranging from rural to urban have been performed. Various values of roughness length were simulated by combining of 4 stream velocities and 3 roughness element conditions. Dispersion measurements have also been made for rough terrain where high buildings are locally concentrated. Values of $\sigma$z increase with roughness and this tendency appears to apply both cases of with and without locally concentrated high buildings. The comparisons of the Bowne's nomogram on $\sigma$2 vs x relationship and the measurements of $\sigma$2 with roughness show good accordance in $\sigma$2 distribution at stability D class over rural, suburban and urban terrain. For constant roughness length the $\sigma$2 values of plumes from lower source height are smaller than those of plumes from higher source at short downwind distance, but this relationship becomes reverse as distance increases. Crossing appears to be made before about 2km. The value of constant I in McMullen's equation $\sigma$2=exp [I+J(In x) + K(In x)2] appears to increase with roughness length, however, the relationships between other constants and roughness have been confirmed. The values of $\sigma$2 for various downwind distances, estimated by using an equation which is employed in ISC (Industrial Source Complex) dispersion model for areas where high buildings are locally assembled, are in accordance with measurements from water channel experiments.

• Tunnel and Underground Space
• /
• v.24 no.1
• /
• pp.81-88
• /
• 2014

In the course of performing the stability analysis of rock structures, there are times when the strength of the Hoek-Brown rock mass needs to be understood in terms of the internal friction angle and cohesion. In this case, the original Hoek-Brown criteion, giving the relationship between ${\sigma}_1$ and ${\sigma}_3$ at failure, have to be transformed to the corresponding Mohr envelope. A new approach to derive the Mohr envelope of the Hoek-Brown criterion is suggested in this study. The new method is based on the Londe's transformation making the stress components dimensionless. The correctness of the derivation leading to the new ${\tau}-{\sigma}$ relationship is confirmed by comparing the calculation results with the Bray's solution through a verification example.

• Journal of Korean Society for Quality Management
• /
• v.30 no.3
• /
• pp.120-138
• /
• 2002

In order to carry out TQM and 6 Sigma management, it is the key elements to make clear a goal and a mission. Above all, we can succeed In achieving a dramatic change and a great outcome only when we make clear the method, incentives, organization and plans under the clear objective. In order to secure the competitiveness against the external challenge, it is essential to keep the several crucial factors such as CEO's will, the systematic process to measure and manage, monitoring to satisfy customer's needs and an aggressive development of TQM activity to encourage the endeavour of the relentless enhancement, and also a positive effort Is to be made for evaluating all quality culture like training experts internally by an outstanding training program under CEO's firm leadership. This study is carried out to understand that which features and factors of success can exist in a company culture if a company accepts a theoretical basis and concept, the general of TQM and 6 Sigma which are one of a management strategy, and carries out TQM and 6 Sigma for achieving improvement of quality and customer's satisfaction.

• Journal of the Chungcheong Mathematical Society
• /
• v.24 no.3
• /
• pp.417-426
• /
• 2011

Let ${\mu}$ be a finite positive Borel measure on the unit ball $B{\subset}{\mathbb{C}}^n$ and ${\nu}$ be the Euclidean volume measure such that ${\nu}(B)=1$. For the unit sphere $S=\{z:{\mid}z{\mid}=1\}$, ${\sigma}$ is the rotation-invariant measure on S such that ${\sigma}(S) =1$. Let ${\mathcal{P}}[f]$ be the Poisson-$Szeg{\ddot{o}}$ integral of f and $\tilde{\mu}$ be the Berezin transform of ${\mu}$. In this paper, we show that if there is a constant M > 0 such that ${\int_B}{\mid}{\mathcal{P}}[f](z){\mid}^pd{\mu}(z){\leq}M{\int_B}{\mid}{\mathcal{P}}[f](z){\mid}^pd{\nu}(z)$ for all $f{\in}L^p(\sigma)$, then ${\parallel}{\tilde{\mu}}{\parallel}_{\infty}{\equiv}{\sup}_{z{\in}B}{\mid}{\tilde{\mu}}(z){\mid}<{\infty}$, and we show that if ${\parallel}{\tilde{\mu}{\parallel}_{\infty}<{\infty}$, then ${\int_B}{\mid}{\mathcal{P}}[f](z){\mid}^pd{\mu}(z){\leq}C{\mid}{\mid}{\tilde{\mu}}{\mid}{\mid}_{\infty}{\int_S}{\mid}f(\zeta){\mid}^pd{\sigma}(\zeta)$ for some constant C.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.2
• /
• pp.105-118
• /
• 2008

The newly developed analysis method for nanoindentation load-displacement curves are focused on not only obtaining elastic modulus and hardness values but also other mechanical properties, such as yield strength and strain hardening properties. Dao et al. developed a forward and reverse algorithm to extract the elasto-plastic properties of materials from the load-displacement curves obtained in nanoindentation test. These algorithms were only applicable for engineering metals (Poisson#s ratio 0.3) using the equivalent conical indenter of the Berkovich. However, the applicable metals are substantially limited because range of used in the finite element analysis is narrow. This study is designed to expand range of the applicable metals in the reverse algorithms established by Dao et al. and to improve the accuracy of that for extracting the elasto-plastic properties of materials. In this study, a representative strain was assumed to vary according to specific range of $E^*/{\sigma}_r$ and was defined as function of $E^*/{\sigma}_r$. Also, an initial unloading slope in reverse algorithms improved in this study was not considered as independent parameters of the load-displacement curves. The mechanical properties of materials for finite element analysis were modeled with the elastic modulus, E, the yield strength, ${\sigma}_y$, and the strain hardening exponents, n. We showed that the representative strain (0.033) suggested by Dao et al. was no longer applicable above the $E^*/{\sigma}_r$ of 400 and depended on values of $E^*/{\sigma}_r$. From these results, we constructed the dimensionless functions, in where the initial unloading slope was not included, for engineering metals up to $E^*/{\sigma}_r$ of 1500. These functions allow us to determine the mechanical properties with greater accuracy than Dao#s study.

• Journal of the Korean Vacuum Society
• /
• v.15 no.1
• /
• pp.50-56
• /
• 2006

We investigated the adsorption of benzene and pyridine on $Si(5\;5\;12)-2\times1$ at 80 K by using variable-low temperature scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. The benzene molecule most strongly binds to two adatoms on the D3 and D2 units in a tilted butterfly configuration, which consists of $di-\sigma$ bonds between C atoms and Si adatoms and two C=C double bonds in the benzene molecule Pyridine molecules interact with adatom(s) on the D2 and D3 units through both Si-N dative bonding and $di-\sigma$ bonds. The dative bonding through the lone pair electrons of N atom produces a vertical configuration (pyridine-like), which is more stable than $di-\sigma$ bonds $Di-\sigma$ bonds can be formed either through Si-N1 and Si-C4 or Si-C2 and Si-C5.

• Journal of the Korean Magnetics Society
• /
• v.11 no.5
• /
• pp.217-221
• /
• 2001

We made magnetite which was prepared with mixed liquids of Fe$\^$2+/and Fe$\^$3+/ added to the 3N-NaOH by coprecipitation reaction. Ahead of making magnetite, we investigated variation of physical properties for changing Fe$\^$2+/ : Fe$\^$3+/. Through the variation of the process temperature, we examined physical properties of magnetite. Also, to examine possibility of magnetic fluids, from magnetite manufactured in this way, we examined the crystal structure by X-ray diffraction pattern. The saturated magnetization $\sigma$$\_$s/, value has 60.8 emu/g, when Fe$\^$2+/ to Fe$\^$3+/ ratio is 0.46 : 0.54 in the synthetic magnetite. Keeping the condition, when the synthetic temperature is kept at 80$\^{C}$ for 30 minutes, we get $\sigma$$\_$s/, value 63.51 emu/g. It shows that $\sigma$$\_$s/, value is bigger as the synthetic temperature is higher.

• Journal of Environmental Health Sciences
• /
• v.36 no.2
• /
• pp.118-127
• /
• 2010

Bivalve samples from 30 locations Korean coastal waters were analyzed to characterize the contamination with and distribution of polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs) and organochlorine pesticides (OCPs). The congeners of PBDE in 30 bivalve samples were analyzed by high resolution gas chromatography with a high resolution mass detector. The levels of PBDEs in bivalve samples ranged from 0.092 to 13.5 ng/g wet weight. These values for PBDEs concentrations in bivalves from Korea were higher than or comparable to available values for bivalves from other countries. In the congener profiles, BDE-47 (mean contribution=42.2%) was predominant, followed by BDE-99 (23.1%), BDE-100 (11.9%) and BDE-154 (3.5%). Among the OCs analyzed, $\Sigma$PCBs and $\Sigma$DDTs levels were highest, followed by $\Sigma$HCHs, $\Sigma$CHLs and HCB. The wet weight based $\Sigma$PCBs and $\Sigma$DDTs ranged from 0.28 ng/g to 19.4 ng/g, and from 0.19 ng/g to 4.86 ng/g, respectively. The $\Sigma$PCBs and $\Sigma$DDT slevels in bivalves along the entire Korean coast were lower than those of the USA, and below the Food and Drug Administration (USA. FDA) limits for fish and shell fish. However, the human health criteria and wild life criteria of the USA. Environmental Protection Agency (USA. EPA) were exceeded for DDE and $\Sigma$HCHs at most of the sampling points.

• Journal of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.215-224
• /
• 1987

The electrical conductuctivity measurements have been made on polycrystalline samples of various compositions in the $MgO-TiO_2$ system from 600 to $1100^{\circ}C$ under $Po_2$'s of $10^{-8}\;to\;10^{-1}$atm. Plots of log ${\sigma}$ vs. 1/T at constant $Po_2$ are found to be linear with the inflections, and the activation energies are 1.94eV for the intrinsic range and 0.48eV for the extrinsic range, respectively. The log ${\sigma}$ vs. log $Po_2$ curves are found to be linear at constant temperature, and the conductivity dependences of $Po_2$ are closely approximated by ${\sigma}\;{\alpha}\;Po_2^{-1/6}$ for the extrinsic and ${\sigma}\;{\alpha}\;Po_2^{-1/4}$ for the intrinsic range, respectively. The dominant defects in this system are believed to be oxygen vacancy for the extrinsic and $Ti^{3-}$ interstitial for the intrinsic range. The conduction mechanisms in both the extrinsic and the intrinsic ranges are proposed by the results of the electrical conductivity dependence on the oxygen partial pressure. Polaron model was suggested in the extrinsic region by the conductivity dependences of temperature and $Po_2$.

• Honam Mathematical Journal
• /
• v.38 no.2
• /
• pp.243-257
• /
• 2016

If we let $L(2K;n):=\sum_{s=0}^{k-1}(^{2k}_{2s+1})\sum_{m=1}^{n-1}{\sigma}_{2k-2s-1,1}(m;2){\sigma}_{2s+1,1}(n-m;2)$ with $${\sigma}_{k,l}(n;2):=\sum\limits_{{d{\mid}n}\atop{d{\equiv}l(mod2)}}d^k$$, then we get the formula of L(2u; p)L(2v; p)L(2w; p).