• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.127-131
• /
• 2002

This paper presents the a measured path-loss characteristics in urban line-of-sight(LOS) and non line-of-sight(NLOS) environments for 3.4, 5.3, and 6.4 ㎓ band signals. A two-ray model is applied to analyse the path-loss characteristics in LOS areas. In LOS areas, an empirical break point, whose distance is shorter than a theorical break point, is founded. Further, a sudden power level drop occurs at a transition point from LOS region to NLOS area and different path-loss exponents are occured various cases. The power level drop due to comer loss and path-loss exponents both increase as the distance between the transmitter and the corner increases.

• Journal of the Korean Society of Safety
• /
• v.25 no.2
• /
• pp.89-94
• /
• 2010

This study deals with the traffic accident according to the improvement projects of frequent accident locations. The objective is to analyze the impact of improvements on the accident reduction. In pursuing the above, the study gives the particular attentions to developing the models based on the data of 70 intersections improved. The main results analyzed are as follows. First, 4 multiple linear regression accident models(total, side right-angle, rear end and side stripe accident) which were statistically significant were developed. Second, total accidents reduction by sight-distance and turning traffic flow improvements, side right-angle by sight-distance, over-speed and lane operation, rear end by turning traffic flow, signal and lane operation, and side stripe by traffic impedance improvements were analyzed. Finally, the above 4 models were evaluated to be statically significant through the correlation analysis and pair-sample t-test.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.108-116
• /
• 2011

Non-line-of-sight (NLOS) error is the most common and also a major source of errors in wireless location system. A novel weighting factor (NWF) method is presented in this paper, based on the RSS(Received Signal Strength) measurements, path loss model and Circular Disk of Scatterers Model (CDSM). The proposed positioning method effectively weighted the TOA distance measurements for each Base Station (BS). Simulation results show that the proposed method efficiently weighted the distance measurements and achieve higher localization accuracy than that of Linear Line of Position (LLOP) and Believable Factor Algorithm (BFA).

• 한국도로학회:학술대회논문집
• /
• 2005.03a
• /
• pp.171-177
• /
• 2005

• 한국도로학회:학술대회논문집
• /
• 2004.10a
• /
• pp.369-376
• /
• 2004

• Journal of the Korean Institute of Navigation
• /
• v.12 no.1
• /
• pp.71-84
• /
• 1988

For traffic proceeding in random directions on a plane surface the frequency of collision, if no avoiding action in taken ,is approximately proportional to the square of the traffic density and directly proportional to the size and speed of the ship, Avoiding is normally taken and the rte of collisions is therefore also governed by additional factors such as the visibility, the effectiveness of the collisionavoidance rules, the competence of personnel or watchkeeping attitude, the maneuverability of the ship and the efficiency of radar and other equipments. From the viewpoint of watchkeeper who is responsible for maneuvering, watchkeeping attitude such as lookout and action to avoid collision is the most controllable factor among those mentioned above. In practice, according to the investigation of the institution of marine courts, about 50% co collisions occurred is caused by disorbedience to steering and sailing rules of international regulations for preventing collision at sea including lookout. So we classify the process of collisions with first sight of another ship , assessment of risk of collisions and action to avoid collisions and make a factural survey about lookout and action to avoid collisions from the point on "time" and " distance", namely relationship among ship's size, speed, first sight time of another ship, action to avoid collisions ,and distance from sight of another ship to collision occurred. According to the results of the actual survey , we come to conclude that most of collisions occurred are due to improper lookout and ineffective action to avoid collision which means time lag from first sight of another ship to time of action taken to avoid collision is relatively long. is relatively long.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.2
• /
• pp.444-452
• /
• 2017

Recently, a demand of Internet-of-things (IoT) rises dramatically and an interest in Low Power Wide Area (LPWA) grows larger accordingly. In this paper, performance in LoRa which is included in LPWA standard is analyzed. Particularly, after measuring Received Signal Strength Indication (RSSI) of received signal on Line-of-sight (LoS) and Non-line-of-sight (NLoS) environment and it is compared with RSSI which theoretical path loss model is applied to. Among many path loss models, the simulation for theoretical RSSI use Log-distance, Two-ray model and Okumura-Hata model that is based on the test database. Consequently, the result of Okumura-Hata model is the most similar with the measured RSSI. When a network based on LoRa is built, this result can used to decide optimal node arrangement.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.2
• /
• pp.121-131
• /
• 2008

Two dimensional road design is connoting danger factor because different point between design standard and driver's reaction. Consequently two dimensional road design is difficult to recognize problem that happen beforehand when before construction. Therefore three dimensional road design that can grasp problem after completion is required. In this study, three dimensional road was designed to evaluate road that is designed. Road designed by Inroad that is road design program. DTM is created using digital map and elevation data. Three dimensional road was designed by integrated DTM of road and topography. Road design evaluation was performed in three dimension. Driving simulation and sight distance assessment were carried out to estimate stability of alignment. Shadow simulation was executed on icy road section for bad section of icy road surface. As a result of evaluation, this study could confirm shape of road after completion. And sight distance could be calculated and visually confirmed. Also, icy road sections were extracted through shadow simulation.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2132-2143
• /
• 2015

This paper presents two distance geometry-based algorithms for wireless location in cellular network systems-distance geometry filtering (DGF) and distance geometry constraint (DGC). With time-of-arrival range measurements, the DGF algorithm estimates the mobile station position by selecting a set of measurements with relatively small NLOS (non-line-of-sight) errors, and the DGC algorithm optimizes the measurements first and then estimates the position using those optimized measurements. Simulation results show that the proposed algorithms can mitigate the impact of NLOS errors and effectively improve the accuracy of wireless location.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.5
• /
• pp.127-133
• /
• 1998

This research intends to gain the sight for the qualitative characteristics of precision cutting by using the CNC lathe with a mono-crystal diamond(MCD) and a poly-crystal diamond(PCD) tool on the cutting distance. In case of an MCD tool, as the cutting distance increases, the surface roughness becomes worse and the standard deviation of surface roughness is small. In case of a PCD tool, as the cutting distance increases, the surface roughness becomes stable with a large standard deviation. The cutting force ratio(Ft/Fn) decreases as the nose radius increases and the decreasing ratio becomes larger for small nose radius.