• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.41-45
• /
• 2007

The effects of channel area on the performance of regenerative type fuel pump were numerically studied by commercial CFD code (ANSYS CFX-10). To examine the effects of channel area, the shapes of the side channel and blade were simplified. The channel area affected the flow characteristics of the internal recirculation flow between the side channel and the blade groove and also made a difference in the overall performance. These loss mechanism with circulation flow were adopted as a loss coefficient in the performance prediction program. The loss coefficient was newly derived from the results of calculations with different channel area, and compared with the experimental results in the reference paper and used to modify the performance prediction program. The circulation flow characteristics with different channel area, which is related with loss mechanism, were also discussed with the results of 3-dimensional flow calculations.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.432-432
• /
• 2007

We studied optical simulation method for ultra slim backlight system. We designed 0.7mm thickness light guide plate and combined 48 white color LEDs for 12 inch wide size TFT-LCD. We designed flat shape PMMA light guide plate with both side patterned. It have vertical prism shape on upper side and ellipse dot pattern on the other side. We targeted 4500 nit brightness and uniform emission characteristic without hot spot or dark area. At first, we designed uniform emission area with more high brightness in center area and then, debugged light entering hot spot zone and direction of outgoing light flux. Although it was designing step, we obtained good result with reverse prism optical sheet and it had good repeatability because it was based on the stamper method in injection process without laser engraving or micro groove engraving method.

• 대한두개안면성형외과학회지
• /
• 제22권2호
• /
• pp.85-92
• /
• 2021

Background: Patients with secondary deformities associated with unilateral cleft lip and nose might also suffer from nostril stenosis due to a lack of tissue volume in the nostril on the cleft side. Here, we used full-thickness skin grafts (FTSGs) to reduce nostril stenosis and various methods for skin volume augmentation. We compared the changes in the symmetry of both nostrils before and after surgery. Methods: From February 2016 to January 2020, 34 patients underwent secondary cheiloplasty and open rhinoplasty for secondary deformities of the unilateral cleft lip and nose with nostril stenosis. FTSG was used on the nostril floor, nasal columella, and alar inner lining. The measured nasal profile included the nostril surface, nostril circumference, width of the nostril floor, and distance from the alar-facial groove to the nasal tip. The "overlap area," which was defined as the largest overlapping area when the image of the cleft nostril was flipped to the left and right and overlaid on the image of the normal side nostril, was also calculated. The degree of symmetry was evaluated by dividing the value of the cleft side by that of the normal side of each measured profile and expressed as "ratios." Results: The results of all profile ratios, except for the nostril floor width, became significantly close to 1, which represents full symmetry. The overlap area ratio improved from 62.7% to 77.3%, meaning that the length and width of the nostril as well as the overall shape became similar (p< 0.05). Conclusion: When performing cleft rhinoplasty with nostril stenosis, FTSG is useful to achieve symmetry in the nostril size and shape. Skin grafting is simpler to perform than the other types of local flap, and the results are generally satisfactory.

• 한국발생생물학회지:발생과생식
• /
• 제1권2호
• /
• pp.181-187
• /
• 1997

This study has been conducted to investigate the mating behavior, time sequence of mating and time limit with which female can fulfill spawning and brooding after pre-spawning molting in the giant fresh-water prawn, macrobrachium rosenbergii reared in the laboratory. the results obtained were summarized as follows. Mating happened spontaneously as the following sequences: courting gesture, seizure of female by male, mounting, turning of female, copulation. The entire mating lated approximately seven minutes. The endopodite of 2nd pleopod of male bore the appendix masculins whcih are male's secondary sex characteristic. cinciulli was formed at the distal portion of appendix interna which are on the upper portion of appendix masculins and helped stabilizing the connection of each side of 2nd pleopod during mating. After the connection of each side of 2nd plepod was fixed on the posterior portion of the thoracic sternum in female, a gelatinous spermatophore that emitted at the basipodite of 5th pereiopod during courting gesture was deposited on the ventral groove of 2nd, 3rd, 4th and 5th pereiopod. time limit which female can fulfill copulation and brooding was from 3 hours to 15 hours after pre-spawning molting.

• Journal of Welding and Joining
• /
• 제19권6호
• /
• pp.636-642
• /
• 2001

Partial penetration welding joint defines the groove welds that applies the one side welding which does not use steel backing and both side welding without back gouging, that is, the partial penetration welding joint leaves an unwelded portion at the root of the welding area. In this study, we analyzed the residual stress and fracture on the thick metal plates that introduced the partial penetration welding method. As results of using above mentioned welding method, we could draw a conclusion that longitudinal stress and traverse stress occurred around the welding area was so minimal and did not affect any influence. We also performed the fracture behavior evaluation on the partial penetration multi-pass welding with 25.4mm thick plate by using theJ-integral, which finally led us the conclusion that the partial penetration multi -pass welding method is more applicable and effective in handling the root face with less than 6.35mm.

• Journal of the Korean Wood Science and Technology
• /
• 제13권1호
• /
• pp.3-18
• /
• 1985

한국(韓國)에서는 리기다소나무 (Pinus rigida Miller, pitch pine) 지재(枝材)의 해부학적(解剖學的)인 특성(特性)에 관한 연구(硏究)가 광학현미경적(光學顯微鏡的)인 방법(方法)을 통하여 이(李)에 의하여 1972년(年) 발표(發表)되었다. 본 연구(硏究)에서는 리기다소나무 지재(枝材)의 해부학적(解剖學的)인 특성(特性)에 관한 이(李)의 연구(硏究) 속보(續報)로써 압축이상재(壓縮異常材) (compression wood), 대응재(對應材) (opposite wood) 및 측면재(側面材) (side wood)의 횡단면(橫斷面)과 방사단면(放射斷面)상의 조직학적(組織學的) 특성(特性)을 주사전자현미경(走査電子顯微鏡)을 통하여 비교(比較) 연구(硏究)한 바 얻어진 결과(結果)를 요약(要約)하여 보면 다음과 같다. 1. 압축이상재(壓縮異常材)에 있어서 춘재(春材)로부터 추재(秋材)로의 가도관(假導管) 이행(移行)은 극점(極漸)이며 가도관(假導管)의 배열(排列) 및 크기 역시 거의 균일(均一)한 상태(狀態)를 나타내지만 대응재(對應材) 및 측면재(側面材)에 있어서는 가도관(假導管)의 이행(移行)이 급(急)하며 가도관(假導管)의 배열(排列) 및 크기도 압축이상재(壓縮異常材)의 가도관(假導管)보다 불균일(不均一)하다. 또한 대응재(對應材)의 연륜폭(年輪幅)은 압축이상재(壓縮異常材)나 측면재(側面材)의 연륜폭(年輪幅)보다 좁으며 측면재(側面材)의 횡단면(橫斷面)상 방사조직(放射組織)은 압축이상재(壓縮異常材) 및 대응재(對應材)의 방사조직(放射組織)보다 더 명확(明確)하다. 2. 압축이상재(壓縮異常材)의 가도관(假導管) 특히 춘재(春材) 가도관(假導管)이 둥근 경향(傾向)을 나타내는데 반하여 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)은 다소 모난 모양을 나타낸다. 그리고 세포간극(細胞間隙) (intercellular space), 나선강(螺旋腔) (helical cavity) 및 나선형(螺旋型) (spiral check)이 압축이상재(壓縮異常材)의 춘재(春材) 및 추재(秋材)에 모두 존재하는데 반하여 대응재(對應材)에 있어서는 춘재(春材) 및 추재(秋材) 모두에 존재(存在)하지 않는다. 3. 대응재(對應材) 및 측면재(側面材)에 있어서 추재(秋材) 가도관(假導管)의 막(膜) 두께가 춘재(春材) 가도관(假導管)의 것보다는 더욱 크지만 압축이상재(壓縮異常材)의 추재(秋材) 가도관(假導管)은 그 막(膜)의 두께가 춘재(春材) 가도관(假導管)의 것과 비슷하여 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)과는 달리 압축이상재(壓縮異常材)의 가도관(假導管)에는 2차막(次膜)의 $S_3$ 층(層)이 존재(存在)하지 않는다. 4. 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)과는 달리 압축이상재(壓縮異常材)의 가도관(假導管)은 종종 그 선단부(先端部)가 굴곡(屈曲)되어 있으며 압축이상재(壓縮異常材)의 가도관(假導管)에 존재(存在)하는 유연막공(有緣膜孔)은 대응재(對應材) 및 측면재(側面材)의 것과는 달리 세포막(細胞膜) 내표면(內表面)의 나선상(螺旋狀) (groove)에 존재(存在)한다. 5. 대응재(對應材) 및 측면재(側面材)의 가도관(假導管)의 방사막(放射膜)에 존재(存在)하는 유연막공(有緣膜孔)은 난형(卵形)이지만 압축이상재(壓縮異常材)의 가도관(假導管)의 유연막공(有緣膜孔)은 약간 변형(變形)된 난형(卵形)을 나타낸다. 6. 측면재(側面材)의 춘재(春材)에 있어서 소형(小形) 분야막공구(分野膜孔口)는 둥근 삼각형(三角形)을 나타내며 대형(大形) 분야막공구(分野膜孔口)는 2개의 소형(小形) 분야막공구(分野膜孔口)가 합병(合倂)되어 창상(窓狀)을 나타낸다. 그러나, 대응재(對應材)의 춘재(春材)에 있어서 소형(小形) 분야막공구(分野膜孔口)는 직립(直立)의 난형(卵形)을 그리고 대형(大形) 분야막공구(分野膜孔口)는 평복(平伏)의 난형(卵形)을 나타내며 압축이상재(壓縮異常材)의 분야막공구(分野膜孔口)는 가도관측(假導管側)의 막공연(膜孔緣)으로 인하여 춘재(春材)의 것이 양편 볼록렌즈형(形)을, 추재(秋材)의 것이 슬릿 (slit)형(形)을 나타낸다.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.187-192
• /
• 2009

A snap ring is a kind of metal spring with open ends which can be installed into a groove to prevent lateral movement. In this study a nonlinear finite element analysis model is developed to simulate the fastening process of a snap ring connecting the constant velocity joint and the transmission. Insert load, disengage load and breakage are three important issues. They are analyzed using the developed model. The load histories of simulations are similar to those of tests and the differences of maximum load are around 10%. Bending of the entire ring and unfolding of the end section are major contributors of the fastening load. The load variations caused by the angular position of spline tooth are about 50%. Breakage is highly sensitive to the position of a snap ring.

• 대한치과의사협회지
• /
• 제21권7호통권170호
• /
• pp.579-583
• /
• 1983

A 58-year old woman with no molar teeth on her upper left side wanted these missing teeth to be replaced with a fixed implant prosthesis. Incision, from distal to 2nd premolar to hamulus, was performed and impression of canine fossa anteriorly, zygoma buccally, pterygoid hamulus posteriorly and palatal groove lingually was taken by Optosil (Bayer Dent.). The implant frame was made of Vitallium, and was inserted the next day after the impression had been taken. 12-days later, the 4-units fixed prosthesis was constructed. The patient was extremely comfortable, had no pain, and was able to chew food more efficiently.

• Journal of Welding and Joining
• /
• 제25권1호
• /
• pp.37-41
• /
• 2007

The purpose of this study is to establish the predictive method of angular distortion of the double-sided multi-pass butt weldment achieve it, the behavior of angular distortion in the butt weldment were investigated using comprehensive finite element analyses and experiments. The angular distortion in the multi-pass butt weldment strongly depends on the welding heat input(Q) and the effective bending rigidity of the weld throat. The effective bending rigidity of the first welding pass on the backing side was defined as the function of dimensionless parameter(k) and a bending rigidity of bead-on-plate weldment. Based on the results, the predictive equation for angular distortion of multi-pass butt weldment was proposed and verified by experiments.

• 한국안전학회지
• /
• 제13권4호
• /
• pp.19-24
• /
• 1998

Elastic-plastic fracture toughness($J_{IC}$) by ultrasonic method is evaluated in terms of width and thickness. Widths of specimen in 6061-T6 aluminum alloy are 50mm and 100mm, thicknesses of those are 20mm and 25mm, respectively. Elastic-plastic fracture toughness by ultrasonic method is independent of specimen thickness and side groove. Angle beam probe which are placed on the end of the compact specimen detect the maximum crack extension effectively. Comparing with elastic-plastic fracture toughness by ultrasonic method and that of unloading compliance method, $J_{IC}$ of ultrasonic method are underestimated to that of unloading compliance method. Elastic-plastic fracture toughness of width 100mm specimen are underestimated to that of width 50mm specimen about 20%.