• 한국기계가공학회지
• /
• 제12권4호
• /
• pp.81-86
• /
• 2013

For a 2-dimensional(2D) vibration milling, an excitation work-table was developed using two piezoelectric materials orthogonally arranged, where the trochoidal trajectory of a milling tool is combined with 2 dimensional elliptical vibration of a work-table. Applying 3kHz excitation frequency and 7~8mm amplitude of vibration to micro milling process with brass and nickel materials, the roughness in both bottom and side surface is much more improved compared to the surface by conventional milling process, which is attributed to decreased frictional force, increased cutting speed, and rubbing effect of a 2 dimensional vibration.

• 수산해양기술연구
• /
• 제30권2호
• /
• pp.116-124
• /
• 1994

There has been studied a lot of two dimensional hydrofoil sections for the boundary layers. This paper suggests that the plaiable roughness effects on boundary layer transition region of suction side for NACA 4412 hydrofoil sections provided by auxieiary shape factor and lag-entrainment effects. These results show that the laminar sepration. Transition and end of transition of the boundary layer due to pitting roughness effects, to the foil Reynold's number as well as to the angle of attack were delayed a little. And comparisons with valuable the other calculations and measurements show qualitative agreements.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.27-34
• /
• 1999

We investigated the effect of mechanical back side damage in viewpoint of electrical and surface morphological characteristics in Czochralski silicon wafer. The intensity of mechanical damage was evaluated by minority carrier recombination lifetime by laser excitation/microwave reflection photoconductance decay technique, atomic force microscope, optical microscope, wet oxidation/preferential etching methods. The data indicate that the higher the mechanical damage degree, the lower the minority carrier lifetime, and surface roughness, damage depth and density of oxidation induced stacking fault increased proportionally.

• 한국지반공학회논문집
• /
• 제24권10호
• /
• pp.25-32
• /
• 2008

암반에 근입된 현장타설말뚝의 주면마찰력은 암석의 일축압축강도 외에 굴착면의 거칠기, 암반의 재료특성, 초기 수직응력, 말뚝의 직경, 암반의 절리 및 풍화도 등에 크게 영향을 받는 것으로 알려져 있다. 특히 주면마찰력에 영향을 미치는 인자 중 굴착공의 거칠기는 암반의 종류, 말뚝의 직경, 그리고 말뚝의 시공법에 따른 영향이 큰 것으로 알려져 있다. 암반의 굴착공 벽면거칠기 측정장치인 Backyoung-Kyungsung Laser Roughness Profiling System(이하 BKS-LRPS라 칭함)의 혼탁도에 대한유효측정영역 및 측정 가능 여부를 결정하기 위하여 실내모형실험을 수행하였으며, 여기서 혼탁($T_b$)와 BKS-LRPS의 유효 측정거리(Effective Measurement Distances(EMD), mm)의 관계식은 $EMD=1149.2{\times}T_{b}^{-0.64}$로 구할 수 있었다.

• 한국수자원학회논문집
• /
• 제43권2호
• /
• pp.139-151
• /
• 2010

횡월류식 강변저류지를 포함하는 하천수계의 흐름 모의를 위한 준2차원 부정류 계산모형을 수립하였다. 수립된 모형은 횡월류 흐름에 대해서는 수량보존에 관한 연속방정식 및 월류형 수위-유량 관계식을, 하도에 대해서는 1차원 St. Venant 방정식을 각각 지배방정식으로 하여 흐름을 모의하는 폐합형 계산모형이다. 수립된 모형을 현재 계획 중인 군남 홍수조절지부터 한강 합류 지점까지의 임진강 구간에 대하여 적용하였다. 횡월류 위어의 유량계수에 대한 민감도 분석 결과, 최대유량 및 수위의 저감효과는 유량계수에 관계없이 거의 일정한 것으로 나타났다. 수계 하류 측에 위치한 강변저류지일수록 배수영향이 커지므로 첨두 홍수위의 감소효과는 줄어드는 것으로 모의되었다. 강변저류지의 홍수저감 효과는 조도계수에 따라 크게 달라지며 횡월류 위어의 정부표고가 높을수록 조도계수에 따른 홍수조절 효과의 불확실성이 커지는 것을 알 수 있었다. 강변저류지의 설계를 위해서는 조도계수의 적절한 추정과정이 선행되어야 함은 물론이고, 추정된 조도계수의 불확실성을 감안하여 횡월류 위어의 정부표고를 결정하기 위한 방법의 개발이 필요할 것으로 판단된다.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.37-43
• /
• 2008

Working condition is one of the most important factors in precision working. In this study, we optimized the vibration acceleration level(VAL) of Al 2024 alloy to select optimum working condition of side wall end-milling using RSM(Response Surface Methodology). RSM was well adapted to make analytic model for minimizing vibration acceleration, created the objective function and saved a great deal of computational time. Therefore, it is expected that the proposed optimization procedure using RSM can be easily utilized to solve the optimization problem of working condition. The experimental results of the surface roughness and VAL showed the validity of the proposed working condition of side wall end-milling as it can be observed.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 춘계학술대회 논문집
• /
• pp.134-140
• /
• 1999

The side mirrors play an important role in driver's safety and convenience. People drive safely based on the side mirrors and room mirror through observation of environment. However, the drivers can not completely confront environments because of the dead angle of the side mirrors. In this research, based on geometric optics and geometric modeling, aspheric surfaces of the side mirror mold with dead angle free has been designed and machined in CNC machining center, Surface roughness of the mold was evaluated by using surface shaping system. The analysis on the shape of formed mirrors shows the mirrors have been reduced the dead angle comparing with the original mold.

• 동력기계공학회지
• /
• 제6권1호
• /
• pp.82-87
• /
• 2002

Not only ferrous but also non-ferrous materials such as aluminum, brass, plastic and woods need cutting operation in recent manufacturing industry. Over the past few years a considerable number of studies have been made on non-ferrous metal cutting. But more study is required to meet various engineering needs. The purpose of this paper is to preform an experiment on the influence of feed-rate adjustment and side rake angle in turning operations from non-ferrous metals. As a result, the surface roughness was reduced when a side-rake angle increases and feed-rate decreases in the case of the plastic, brass, aluminum, and paulownia. Therefore, this papers develop a new type bite that be used to adjust side-rake angle.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2005년도 학술발표회(1)
• /
• pp.375-377
• /
• 2005

• 한국공작기계학회논문집
• /
• 제16권5호
• /
• pp.90-95
• /
• 2007

Single side final polishing is a very important role to stabilize a wafer finally before the device process on the wafer is executed. In this study, the machining variables, such as pressure, machining time, and the velocity of pad table were adopted. These parameters have the major influence on the characteristics of wafer polishing. We investigated the surface roughness changing these variables to find the optimal polishing condition. Pad, slurry, slurry quantity, and oscillation distance were set to the fixed variables. In order to reduce defects and find a stable machining condition, a hall sensor was used on the polishing process. AE sensor was attached to the polishing machine to verify optimal condition. Applying data analysis of the sensor signal, experiments were performed. We can get better surface roughness from loading the quasi static force and improving wafer-holding method.