• Journal of Electrochemical Science and Technology
• /
• v.7 no.2
• /
• pp.179-184
• /
• 2016

The interface between the surface of a cathode material and the electrolyte gives rise to surface reactions such as solid electrolyte interface (SEI) and chemical side reactions. These reactions lead to increased surface resistance and charge transfer resistance. It is consequently necessary to improve the electrochemical characteristics by suppressing these reactions. In order to suppress unnecessary surface reactions, we coated cathode material using polypropylene (PP). The PP coating layer effectively reduced the SEI film that is generated after a 4.3 V initial charging process. By mitigating the formation of the SEI film, the PP-coated Li[(Ni_0.6Co_0.1Mn_0.3)_0.36(Ni_0.80Co_0.15Al0.05)_0.64)]O₂(NCS) electrode provided enhanced transport of Li⁺ ions due to reduced SEI resistance (R_SEI) and charge transfer resistance (R_ct). The initial charge and discharge efficiency of the PP-coated NCS electrode was 96.2 % at a current density of 17 mA/g in a voltage range of 3.0 ~ 4.3 V, whereas the efficiency of the NCS electrode was only 94.7 %. The presence of the protective PP layer on the cathode improved the thermal stability by reducing the generated heat, and this was confirmed via DSC analysis by an increased exothermic peak.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.147-148
• /
• 2023

Steel doors, which are common in general buildings, do not seal the gap between the door and the floor, so drafts, noise, dust, and lights flow from the outside, and shielding devices are installed in various materials and methods, such as adding magnetic gate paper to the side of the door or installing a gasket under the door, but performance is limited. Accordingly, in order to fundamentally solve these problems, we researched and developed a double gap blocking device that can improve fire resistance and airtightness performance in steel doors. Unlike general products, the double gap blocking device has the advantage of maximizing airtight performance by forming an air layer in the center when the door is closed, as well as greatly improving the fire resistance performance, which is the basic performance of the fire door.

• Physical Therapy Rehabilitation Science
• /
• v.5 no.2
• /
• pp.106-112
• /
• 2016

Objective: This study was conducted to investigate the effects of resistant exercise on the gait performance of a patient with systemic lupus erythematosus (SLE) patient. Design: A case study. Methods: A 30-year-old male adult who had been diagnosed with systemic lupus erythmatosus (SLE) in April 2013, right middle cerebral artery infarction, and with left hemiplegia agreed to participate in this case study. Patient was unable to walk due to being affected with adynamia. Due to developing necrotizing vasculitis on the left lower extremity, patient underwent a myotomy on the left thigh. The patient was trained with a progressive resistant exercise program for 8 weeks. An intensity of 15 RM was used for the resistant exercises and the resistance level was increased progressively in order to improve the muscle power of the patient. Methods used to increase resistance included changing positions, providing mechanical resistance instead of manual resistance, transitioning from open kinetic chain to closed kinetic chain exercises, and changing the colors of the theraband to those with increase level of resistance. Outcome measures included the 5-repetition sit-to- stand test (5RSST), Timed Up & Go (TUG), and 10-meter walk test (10MWT). In addition, the GAITRite was used to assess the spatio-temporal gait variables, including gait speed, cadence, stride length of the left side, and double limb support pre and post-intervention. Results: The patient was able to perform sit-to- stand after two weeks of performing the resistant exercises. The patient was able to walk after 4 weeks, and the patient's overall gait performance had improved after 8 weeks. All of the variables had improved after each week. Conclusions: The results of this case study may be used to enhance future efforts to objectively evaluate resistant exercises during gait performance in persons affected by SLE.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.6C
• /
• pp.295-301
• /
• 2009

In general the stability of soil nail-slope system, the shear resistance is neglected because the tensile resistance of nail acts mainly for slope stabilization. This is because that deformed steel is generally used for nail and it does ductile behavior. In other side when the steel pipe with high rigidity is used for nail, the shear resistance at failure surface work more than deformed steel. In order to analyze effects of shear resistance at the soil nail-slope system with high steel piped nail, a series of numerical analyses were performed. Also numerical analyses at 3 conditions - 5 nailed, 7 nailed, 9 nailed at the same slope were perfomed for investigating the trend of shear resistance effect. From these 3D numerical analyses, it was found that the maximum shear resistances at each nails were larger in case of steel piped nail and because of this, the factor of safety at the condition of the steel piped nail appears larger than that of deformed steel nail.

• Applied Chemistry for Engineering
• /
• v.29 no.4
• /
• pp.405-412
• /
• 2018

Three types of bis[3-(dialkyloxylphosphorothionyl) thio-2-methylpropanyloxy]alkane (BAPA) drived from alkane diol were synthesized. The principal chain of each BAPA had a different carbon number, i.e., 6, 9, and 11. The three types of synthesized BAPA were compared to zinc dialkyl dithiophosphates (ZDDPs) in terms of abrasion resistance. A four-ball test was conducted to evaluate the anti-abrasion performance of the synthesized BAPA according to the length of the principal carbon chain. Each product was added to an additive at a concentration of 1% of the base oil weight, and the wear scar diameter (WSD) was measured as 0.472, 0.459, and 0.480 mm, respectively. Among the BAPA compounds, dialkyl dithiophosphoric acid (DDP), which is the side chain of bis[methacryloyloxy] nonane (BMOO9), was synthesized by varying the carbon number, i.e., 4, 8, and 12, and subsequently the 4-ball test was carried out. The WSD was determined as 0.537, 0.459, and 0.531 mm, respectively. As a result, it was found that when a side chain is short, a thin film is formed. In contrast, a long side chain hindered the formation of a film, and hence the best result was achieved when the carbon number was 8. As for the ZDDPs, the WSD was determined to be 0.563 mm, when measured under the same conditions. The measurements confirm that the synthesized BAPA compounds are superior to the ZDDPs as abrasion resistance additives.

• The Journal of Advanced Prosthodontics
• /
• v.8 no.2
• /
• pp.158-166
• /
• 2016

PURPOSE. The aim of this study was to determine the fracture resistance and the mode of fracture of endodontically treated teeth restored with different fiber posts and all-ceramic crowns. MATERIALS AND METHODS. Two glass fiber reinforced post systems in two different sizes and polyethylene fiber ribbon in two different thicknesses (n=10) were used. The specimens, restored with all-ceramic crowns, were subjected to a compressive load (in N) delivered at a 130-degree angle to the long axis until a fracture could be noted. The results were analyzed statistically with a One-Way ANOVA test (P<.05). RESULTS. Statistically significant differences were observed between the mean fracture resistance values of Postec, Snowlight, and Kerr Connect thin specimens (P<.0095). The Postec results (395.70 N) were found to be significantly higher than the others. No statistical difference was observed among the thick specimens (P<.2657). The mean fracture resistance values of the Snowlight thick samples were found to be higher than those of the Snowlight thin samples. The specimens were always fractured around the cemento-enamel junction at the palatinal side. No post fracture was observed for the thin Snowlight and Kerr Connect specimens or for the thick Postec and Kerr Connect specimens. Among the common failure types of the specimens, the worst was observed to be the root fracture failure. The highest post dislodgement failure result (80%) was obtained from the thin Kerr Connect specimen. CONCLUSION. In terms of optimizing fracture resistance, the fiber post size selection should be done according to the forces applied to the restored teeth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2009.05b
• /
• pp.247-252
• /
• 2009

The LMC method of construction which have application to the road bridge is being considered the least relative importance about the watertight performance, because it focused on the durability of concrete. However, The LMC which is being expanded scope of application to the method of construction has grown importance about the watertight performance on the usability and maintenance side as well as durability. In this study, The latex concrete of two types which are different from mingled-ratio of the latex made a comparison to the compressive strength, watertight performance, dynamic wheel load resistance performance and confirmed what it has resistibility about chemical action through the chemical resistance test. The initial strength and watertight performance showed that were tendency the downward at 14 days. However, The long-term strength after 28 days showed that it has firm performance. In consequence, The initial curing of latex concrete is required to scrupulous care and attention at the site application. As a chemical resistance test result, The specimen that is steeped in sulphuric acid solution of 2% discovered the delamination phenomenon. However, it was confirmed that delamination phenomenon don't have an effect on the compressive strength. Moreover, As a dynamic wheel load resistance test result, The latex concrete was concluded to confirming the durability and running stability, because it had hardly any thickness reduction of latex concrete surface about dynamic wheel load and rarely found crack and delamination.

• Cross-Cultural Studies
• /
• v.31
• /
• pp.155-175
• /
• 2013

Meantime there has been a tendency to keep silent about the role of Afro-Ibero America Diaspora which contributed to the spirit of independence and the realization of country foundation ideology in the official history of Latin America. In some countries, although the collective resistance of Afro-Ibero America Diaspora, which intended to establish a liberal and equal society resisting against slavery and colonization system, was the foundation of independence and the establishment of a new country, their contribution has been difficult to leave an official trace in Caucasian criollo-centered history system. Along with the development of Hcienda in 17th Century, black slaves' collective resistance was developed mainly with el Virreinato de la Nueva Granada, the center of the Independence movement of Brazil and South America. The black people who escaped resisting against slavery formed communities and developed organized activities through various politics and social activities. However, such communities were mostly dispersed or destroyed by the colonial power, and the collective resistance of Afro-Ibero America Diaspora lost life. On the other side, in case of Colombia, a community of escaped black slaves which was formed in the early 17th Century is solely remaining in Latin America, moreover, Afro-Ibero America Diaspora's struggle for liberty and equality became the foundation for Comuneros revolution and Independence movement in the late 18th Century. Comuneros revolution which occurred in 1781 awoke self-awareness of liberty and equality, and became an ideological base for independence movement based on revolutional republicanism and philosophy of enlightenment. It is considered that South America's independence movement lead by $Sim{\acute{o}}n$ Boívar was a history that could not have started without historical base of Afro-Ibero America Diaspora's resistance against colonization system. Therefore, this study intends to discuss the role and achievement of Afro-Ibero America Diaspora in the process of independence of Latin America mainly with Colombia, which is the center of Independence movement of South America. Through this process, this study intends to revaluate historical contribution of Afro-Ibero America which has been relatively neglected meanwhile in the process of independence and the establishment of country.

• Journal of The Korean Society of Integrative Medicine
• /
• v.9 no.3
• /
• pp.145-153
• /
• 2021

Purpose : The purpose of this study was to compare and analyze whether there are changes in muscle elasticity when resistance using an elastic band is present or absent during a bridge exercise on an unstable surface with a gymball. Methods : Eighteen healthy adult college students attending E University in Gyeonggi-do, who voluntarily agreed to participate were included in this study. The subjects were instructed to perform the bridge exercise using a gymball both without resistance and with resistance using an elastic band. Myoton was used during the exercise to measure the elasticity of the rectus abdominis and biceps femoris muscles. Results : There was a significant difference in the stiffness of the rectus abdominis muscle on both sides before and after using the elastic band (p<.05). however, no significant difference was observed in the biceps femoris on either side (p>.05). Based on the evaluation of the frequency before and after using the elastic band, no significant difference was observed between the rectus abdominis and biceps femoris muscles on both sides (p>.05). The logarithmic decrement was significantly different in the right rectus abdominis muscle (p<.05), and there was no significant difference in the left rectus abdominis and both biceps femoris (p>.05). Conclusion : Resistance exercise using an elastic band is more effective in improving elasticity of the rectus abdominis muscle than without a elastic band during bridge exercise with a gymball.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.4
• /
• pp.422-429
• /
• 2000

Plate and shell heat exchanger(P&SHE) is widely applied as evaporators or condensers in the refrigeration and air conditioning systems for their high efficiency and compactness. In order to set up the database for the design of the P&SHE, heat transfer and pressure drop characteristics for single phase flow of water in a plate & shell heat exchanger are experimentally investigated in this study. Single phase heat transfer coefficients were measured for turbulent water flow in a plate and shell heat exchangers by Wilson plot method. The shell side heat transfer resistance was varied and the overall heat transfer coefficients were measured. The single-phase heat transfer coefficients in a plate side were obtained by Wilson plot method. Single-phase heat transfer correlations based on projected heat transfer area and friction factor correlations have been proposed for single phase flow in a plate and shell heat exchanger.