• Journal of the Korean Society of Radiology
• /
• v.9 no.6
• /
• pp.331-335
• /
• 2015

Consideration of Glenohumeral joint's image with the Changed Body angle of the Glenohumeral joint's Oblique Position in Erect Position. Glenohumeral joint's of Grashey method is a shoulder oblique method available to view the shoulder joint. Grashey method projects AP view of the Glenohumeral joint's so that the Humerus head's subluxation or joint degeneration can be easily visualized. However in this view, the patients, erect position, have to keep their body obliquely. Oblique position is will be needed to get the good quality Glenohumeral joint's view. Therefore, we thought of examining a method which shows the Glenohumeral joint's well by angling the patient one side upward in erect position. For this study, total 20 subject with no history of neurological or psychiatric illness, were recruited for examinations. They consisted of 13 mails and 7 femails, Statistic group analysis was performed with ANOVA test. Score of the evaluation of the expects were $30^{\circ}$ at $0.40{\pm}0.499$, $35^{\circ}$ at $1.34{\pm}0.657$, $40^{\circ}$ at $1.84{\pm}0.573$, $45^{\circ}$ at $0.76{\pm}0.649$, and they were significant(P<0.05). The degree of $40^{\circ}$ views were shown to yield good quality shoulder oblique images.

• Economic and Environmental Geology
• /
• v.17 no.3
• /
• pp.215-230
• /
• 1984

Petrological, paleomagnetic, geomorphological and structural studies on the southern part of, so called, Chugaryeong rift valley, have been carried out in order to clarify the nature of the rift valley. Three stages of volcanic activities characterized by Jijangbong acidic volcanic rocks and tholeiitic and andesitic basalt of Cretaceous age(?), and Jongok Quaternary olivine basalt occurred along the Dongducheon fault line. Jijangbong acidic volcanic rocks distributed in the central part of the studied area consist of rhyodacite, acidic tuff and tuff breccia, which are bounded by Dongsong fault on the east and Daegwangri fault on the west. The Jongok basalt differs from those of Ulrung and Jeju islands in mineralogy, chemical composition and differentiation. Jongok basalt distributed along the Hantan river dilineates the vesicles curved toward downstream direction and increment of numbers and thickness of lava flow toward upstream direction. These facts suggest that lava flowed from upstream side of the river. Rectangular drainage patterns also support the presence of the Dongducheon, Pocheon, Wangsukcheon and Kyonggang faults which were previously known. LANDSAT image, however, does not show any lineaments which could be counted as a graben or rift valley. Displacement of Precambrian quartzite and Jurassic Daedong supergroup along the southwestern extension of the Dongducheon fault shows the right lateral movement. The Paleomagnetic study of the tholeiitic and andesitic basalts from Baegeuri, Jangtanri and Tonghyeonri located at 2. 3km east, 0km east, and 1.5km west of Dongducheon fault respectively shows that their VGP(Virtual Geomagnetic Pole) being to intermediate geomagnetic field of short duration which suggests that they formed in almost same period. Mean VGP of Jongok basalt is located 82.4N and 80.6E. This is in good coincidence with worldwide VGP of Plio-Pleistocene indicating that Jongok basalt was extruded during Plio-Pleistocene epoch, and suggesting that the studied area has been tectonically stable since then. From the present study, the tectonic episode of the region is concluded as following three stages. 1. The 1st period is worked by the Daebo orogeny of Jurassic during which granodiorite was intruded in Precambrian basement. 2. The 2nd period is the time when right lateral strike-slip fault of NNE-SSW direction was formed probably during late Cretaceous to Paleogene and the Jijangbong acidic volcanic rocks and the older basalts were extruded. 3. The 3rd period is the time when the fault was rejuvenated during Pliocene or Pleistocene accompanied by the eruption of Jongok basalt. As a conclusion, geologic structure of the studied area is rather fault line valley than graben or rift valley, which is formed by differential erosion along the Dongducheon fault suggesting a continuation of the Sikhote-Alin fault. The volcanic rocks including the Jijangbong acidic rocks, tholeiitic-andesitic basalt and olivine basalt are associated with this fault line.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.4 s.31
• /
• pp.35-43
• /
• 2004

Multibeam Echosounder system is the latest technology of a hydrographic survey utilized in producing an electronic nautical chart, obtaining a DEM with high precision, making a moving image by Swath surveying a wide area. As a fundamental study for improving the precision of MBES, we compared and analyzed measurements of DGPS and Motion sensor, and studied for the dynamic characteristics of vessel's movements. DGPS was installed in front and in the rear and on both side or the vessel and surveyed. The receiving precision of surveyed GPS results was obtained to the satisfactory extent that was possible to valuate the accuracy of Motion sensor as 0.0016$^{\circ}$ of the roll value and 0.0009$^{\circ}$ of the pitch value. The relationship between the values of heading, pitch, and roll in Motion sensor and the data of DGPS was proportional correlation. In addition, it is considered that deviations by elements like rapid turning and vibration of the vessel will be occurred, although the correlation of each deviation according to each amount or change is proportional. It is suitable that GPS installs in the central line of the vessel that is less affected than other places by waving because the amount of change in the tide level obtained from GPS survey and the value of heave are similar with the values taken by Motion sensor, and the velocity of GPS is different from installed places. The accuracy of the final result from MBES could be affected by the values of gyro and Motion sensor inputted to MBES processor because there were intervals of 15s and 13s of receiving time in gyro and Motion sensor respectively compared with the real-time measurements of DGPS.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.401-408
• /
• 2014

In membrane bio-reactor (MBR), the aeration control is one of the important independent variables to decrease fouling and to save energy with shear stress change on the membrane surface. The paper was carried out for numerical simulation of 3-dimensional fluid flow phenomena of the cylindrical bioreactor with submerged flat membranes equipped in the center and supplied the air from the bottom by using the COMSOL program. The viscosity and temperature of solution were assumed to be constant, and the specific air demand based on permeate volume ($SAD_p$) defined as scouring air per permeate rates was used as a variable. The calculated CFD velocities were compared with those of the velocity meter measurement and video image analysis, respectively. The results were good agreement each other within 11% error. For fluid flow in the reactor the liquid velocity increased rapidly between the air diffuser and membrane module, but the velocity decreased during flowing of the membrane module. Also, the velocity increased as it was near from the reactor wall to the central axis. The calculated shear stress on the membrane surface showed the highest value at the center part of the module bottom side and increased as aeration rate increased. Especially, the wall shear stress increased dramatically as the aeration rate increased from 0.15 to 0.25 L/min.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.29 no.3
• /
• pp.249-258
• /
• 2013

The purpose of this study was to investigate how image magnification in dental panoramic radiography is influenced by object position. Five metal balls (4 mm in diameter, 2 for the anterior and 3 for the posterior region on the right side) were placed above alveolar crest of dry skull considering extraction socket and dental arch. Dry skull was radiographed using OP-100D (Instrumentarium Imaging Co., Tuusula, Finland) at proper and displaced position along the sagittal and transverse plane at 3 mm, 6 mm, 9 mm, 12 mm and 15 mm using special mount which can control precise movement. Images were stored in DICOM files and were measured by ruler equipped within INFINITT PACS software (Infinitt Co., Ltd., Seoul, Korea). The mean horizontal magnification was 1.224-1.439 and mean vertical magnification was 1.286 - 1.345 at proper position. Vertical magnification resulted in less variation (1.245-1.418) than horizontal magnification (0.798-6.297) according to the sagittal and transverse displacements. Head positioning is important for linear measurement on panoramic radiography and inclusion of standard object (for instance, metal ball) is helpful to anticipate exact magnification of panoramic radiographs at various location.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.744-750
• /
• 2015

In this paper, development of mobile robot for the inspection of hull surface was mentioned. In the sea, it is difficult to proceed with the visual inspection of hull side and thus mobile robot for checking the status could be run with strap-on its surface. To do this, permanent magnet module to generate magnetic force between hull surface and mobile robot, and structure to minimize variance of the force under curvature circumstance were considered on the design. Based on the design, mobile robot with four NdFeB, four driving wheels and image aquisition module was applied. Load experiment to check the adhesive force, slip test during stop state and driving test to measure driving speed were executed. From the experiments 13 Kgf adhesive force was obtained and slip was not happened until 8 Kgf load on the inclined plate. Driving speed of mobile robot was measured at 0.82 m/s corresponding to 6.5 ampere. We confirmed the effectiveness of developed mobile robot by experiments to check its characteristics.

• 보존과학연구
• /
• s.36
• /
• pp.74-85
• /
• 2015

An ox bone object was excavated from the wetland at the excavation site in Bogam-ri tumulus, Naju. It was only able to identify the full image of the shape. Bogam were deteriorated and cracked due to the soil pressure and the repeated cycle of freezing and melting. They were also fragmented in pieces and powdered. In situ, bones were dewatered, consolidated and wrapped together with surrounding soils not to lose the fragmented bone pieces. Unpacking was carried out in the conservation lab and the treatment was processed. Soils on the reverse were removed and then the surface was consolidated and reinforced. Then, soils on the excavated side was cleaned and the surface was consolidated. The object was placed in the produced storing box. When the ox bone object was excavated, it did not have its head and was in the shape of tieing all its legs up. This shows that the animal had been tied up during a ritual and then buried. During the treatment, the importance of the burial purpose and maintaining the shape at the time of excavation was considered. Therefore, the shape of the object at the time of excavation was maintained rather than dismantling all these fragile bones and finding the shape of an ox. This conservation of ox bone object shows that conservation treatment methods have to be vary depending on characters and conditions of objects. In addition, it is expecting that this writing could be the reference to bone and horn objects excavated in the future for the whole process from the excavation to the conservation treatment.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.264-271
• /
• 2019

Cheomseongdae in Gyeongju, known as an astronomical observatory, is a cultural monument with great historical, academic, and artistic value, as its unique shape is preserved well in its original form. The outer structure, ground stability, and seismic reliability of Cheomseongdae have been assessed by numerous researchers through various scientific methods, but research on the underground structure has been insufficient. This paper contains detailed models of the underground structure of Cheomseongdae interpreted in 2D and 3D images based on the data acquired through GPR surveys conducted of features in and around the base of Cheomseongdae. As a result, the existence of twelve small features arranged in a circle, although only about half of them remain, was confirmed at a depth of 0.4 - 0.6m. Furthermore, a structure three bays long (north-south direction) and four bays wide (east-west direction) was detected beneath Cheomseongdae at the depth of 0.7 - 1.0m. Other than 2 layers of foundations as is known, a square structure with the dimensions of 7m × 7m is situated at a depth of 0.6m, directly under Cheomseongdae, and what is reading that is expected to be the foundation structure of Cheomseongdae was detected and confirmed. This foundation structure is circular with a diameter in the east-west direction of 11m and in the north-south direction of 12m. The northern, western, and eastern edges of this foundation structure are about 1m away from the foundation of Cheomseongdae, whereas the the south side extends to about 5m wide.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.133-152
• /
• 2015

Some artists and scientists in physics and animation originating from research on its form of expression thanks to the rapid development of the example in the late 20th century image production technology integrating existing media feature, perform a re-creation and pop culture content has been recognized as a key factor. animation of the modern emphasis is also commercial and artistic activities as show whether the artist can not be excluded that also target audience. The audience does not want only to receive offers simply 'seeing' and 'hearing' in the animation requires a more indirect mental met. the other side, the director should lead the audience to immerse myself in work as intended mystification induce the world. where a conflict occurs between the audience and the director and The director needs to have its troubleshooting point to 'Technology of the communication'. Which is reduced to 'How will tell,' is technology communication technologies that are abbreviated representations of animation director is accessible to the audience and it is a close relationship between the psychological aspect of audience. Because, the audience is reproduced in a limited space, but he called on the board of directors and the same time the screen, the audience located at reception and the director located at provide. It is given. led force is given to the director. for this reason, The director needs to pay attention to the psychological aspect of audience this can be explained based on psychoanalytic theory. In this paper, "How can you lie to the audience and the director is the same line?" put down logic that is the animation audience under the logic that takes place visually capture phenomenon "selective attention" and sub-concept of "goal-directed selection' and 'stimulus-driven capturel' for theory of psychology. also, Induction device to elicit selective attention of the audience accordingly, let's consider whether and how they apply in animation.

• Journal of Acupuncture Research
• /
• v.17 no.3
• /
• pp.219-232
• /
• 2000

Objective : The meridian and the acupuncture point of oriental medicine are very important in the department of acupuncture and moxibustion. Recently, we needed to study on the phenomenon of the meridian and acupuncture point with objective data. And then, I made a study of effects on the thermal changes of Five-shu-points(五輸穴) of the Lung meridian with acupuncture on Taeyon($L_9$, 太淵), using Digital infrared thermal imaging(D.I.T.I). Method : This study researched into clinical statistics for 60 men who are in good health. The objective was divided into two groups, one was the control group(CON, N=30) and the other was acupuncture group(ACU, N=30). The first, I took a picture for 60 men with the Digital infrared thermal imaging(D.I.T.I.). After 10 minutes, I took a second picture for each group following experimental methods. Results : I. The Mean temperature of Sasang($L_{11}$), Oje($L_{10}$), Taeyon($L_9$), Kyonggo($L_8$), Choldaek($L_5$) and Taenung($P_7$) area in adult men with good health, made a no significant difference with left and right side points. 2. Acupuncture group with acupuncture stimularion on Taeyon($L_9$) had a effect on much thermal changes of Sasang($L_{11}$), Oje($L_{10}$), Taeyon($L_9$), Kyonggo($L_8$) and Choldaek($L_5$) than control group. The thermal changes of the area which is a meridian point in the Lung Meridian of acupuncture group differed from control group with significant decrease and increase following the decreasing or increasing temperature class. Each class of ascent and descent thermal change was statistically significant value compared with control group. 3. Acupuncture group with acupuncture stimulation on Taeyon($L_9$) had not a effect on thermal changes of Taenung($P_7$) area than control group. And the increasing and decreasing temperature class of the acupuncture group did not significantly differ from control group. Conclusion : I could think that the acupuncture on Taeyon($L_9$) affected the thermal change of the area which is the Five-shu-points in the Lung Meridian. And then I could relate these results with the existence of the meridian and acupuncture point.