• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2001.10a
• /
• pp.32-37
• /
• 2001

In the present industry, there are necessary to cut not only iron metals but also non-ferrous metals such as aluminum, brass, plastic and wood(Paulownia). therefore it had been made the studies of non-ferrous metals by many scientists. we hope this kind of study will continue. The purpose of this study is to conduct the basic experiment about influencing of change the side rake angle at turning of non-ferrous metals. As the results, the surface roughnesses were on the increase with a increase of side-rake angle at the case of the plastic, brass, aluminum, and paulownia.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.53-57
• /
• 1996

The side burrs and shape distortion resulting from the micromachining of an array of V-shape microgrooves in optical components were experimentally invesigated and a simplified model for their formation is proposed. Burr/shpae distortion should be kept to a minimum level since they degrade the characteristics and performance of these parts. The focus of this study is on the influence of depth of cut and workpiece material. The workpiece materials use were brass, bronze and copper. From the obsevation of the chip shape and burr/shape distortion, the proposed model, that the compressive force at the cutting edge causess the ductile uncut chip material to flow plastically outward toward the free surface to result in a burr, was verified.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.68-74
• /
• 2004

The use of digital filters in the signal processing field is increasing rapidly with development of the modem industrial society, and generally digital filter is classified into FIR (infinite impulse response) fillers and FIR (finite impulse response) filters. The FIR digital filter has the phase linearity and the easiness of creation. In the design of the FIR digital filter, the window function is used to alleviate ripples caused by Gibbs Phenomenon around the cut-off frequency of the passband. In this paper, we designed a new window function and compared with existing Manning, Hamming and Blackman window functions. And we used peak side-lobe and transient characteristics as standard of judgement.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.42
• /
• pp.36.1-36.5
• /
• 2020

Background: Different genioplasty techniques are applied for the adjustment of chin area deformities such as chin deviation. Results: Thirty patients with simple facial asymmetry due to chin deviation underwent computer-assisted horizontal translational osseous genioplasty. In this technique, a surgical guide was used to cut a bone strip from the side where the chin should be transferred to; then, the same bone strip was used for the filling of the gap that was formed on the opposite side. Conclusion: According to the experience gained from this study, the authors believe that computer-assisted horizontal translational osseous genioplasty is a simple and reliable technique for patients with facial asymmetry due to chin deviation.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.139-144
• /
• 1991

Chip flow angle is one of the important factors to be determined for the scheme of Chip Control. Up to now, however, a dependable way to predict the chip flow angle in practical cutting has not been established satisfactorily. In this paper a rather simple theoretical prediction of chip flow angle is tried based on some already widely confirmed hypotheses. The developed equation of chip flow angle contains the parameters of depth of cut d, feed rate f, nose radius $r_{n}$ side cutting edge angle $C_{s}$, side rake angle .alpha.$_{s}$ and back rake angle .alpha.$_{b}$. Theoretical results of chip flow angle given by this study bas been shown in a good agreement with experimental ones.s.s.s.s.

• Journal of Oral Medicine and Pain
• /
• v.13 no.1
• /
• pp.61-69
• /
• 1988

The study of the muscle fiver composition and the muscle fiver type conversion during unilateral edentulous condition was undertaken in the rostral superficial masseter muscle of the whiter rat. 16 4-week-old male white rats weighting approximately 130gm that crowns of left upper and lower molare were cut intentionally, were divided into 4 groups (one control group and 3 experimental groups). After experimental groups were sacrificed by etherization in 6 days($E_1$), 18 days($E_2$) and 36 days($E_3$) separately, samples of the rostral superficial masseter muscle were obtained bilaterally and the proportion of type I, type IIA, type IIB, and type IIC fibers was determined and counted according to their histochemical activity of myosin ATPase (at pH 9.4, pH 4.6, and pH 4.2)and PAD staining. The obtained results were as follows : 1. The rostral superficial masseter muscle of the white rat contained approximately 47.5% type I fiber and 52.5% type II fiber. 2. Type I/ Type II ratio of molar-present side was increased significantly in the group E2 (18 days group) 3. Type IIA fiber was increased at molar-present side and decreased at molar-absent side in experimental groups.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.345-348
• /
• 2008

The computer-aided performance simulation can reduce periods for development of products and cut down on the cost comparing with former trial-and-error procedures. This study has developed a simulation program for a vehicle thermal management system integrating an engine cooling system and an air conditioning system considering interactions and arrangement of air side heat exchangers such as power steering oil cooler, air-cooled transmission oil cooler, condenser, and radiator. The program may be also used for the system performance analysis according to the configuration of the engine coolant side heat exchangers such as water-cooled transmission oil cooler, EGR cooler, and heater core. Experiments utilizing an environmental wind tunnel has been conducted to assess the performance of the system according to the arrangement of air side heat exchangers. Some modification of the coolant loop layout can enhance the heat core performance up to 7% according to the results of the simulations.

• Journal of the Korea Furniture Society
• /
• v.12 no.1
• /
• pp.47-55
• /
• 2001

Violin bridge blank cut from maple wood with good quality has typical pattern of the radial direction in the side edge with minimal dispersion. This experimental study was designed and carried out to examine the effect of the physical and macroscopical characteristics on the compressive creep of violin bridge blank which had been imported from European manufacturer. This research arose from the idea that the maple solid wood with heterogeneous wood density and ray direction in the side edge would have uneven rheological property of violin bridge blank which is supposed to be pressed by the tension of strings. Experimentally, the compressive creep of bridge blank became smaller with the higher density of imported maple wood and showed clear density-dependence for the duration of load under the string tension of 5 kgf. Every bridge blank showed the behavior of primary creep stage(stress stabilization) having logarithmic regression creep curve with high correlation coefficient under the designed stress level. Even though the relationship between compressive creep and ray direction on the side edge of bridge was not so clear contrary to expectation, we could conclude that wood density and ray direction should be the quality decisive factors affecting the acoustical characteristics and performance of the bridge, the core member of violin-family bow instruments.

• Journal of Fashion Business
• /
• v.10 no.6
• /
• pp.122-130
• /
• 2006

The purpose of this study is to develop the appropriate brassiere pattern for women. Total of 6 brands with same design and 75A, 80A size brassieres(total 12 brassieres) were compared and analyzed for pattern, cup size and patterns. SPSS 10.1 statistic process was used for data analysis. The outcom of this study is summarized as follows. Total length of brassiere by grade were performed smaller than the standard difference 5cm. For 1/2 front cover length, There were no significant differences between 75 and 80. The reason for lower line of wing is shorter than upper line of wing is because side support is cut side ways considering lower line of wing is sewn more toward front than upper line of wing. Even it is same A cup size most cup related sizes become larger according to underbust comparing with cup capacity, they range from 146.67cc to 172.83cc for same A cups. Among same A cups with difference underbust there was average of 26.16cc differences. For relations of material, sewing technology and expansion rate, all 6 brands had zigzag type sewing for upper line tape. For every 0.3cm height, there were $17{\sim}21$ stitches. When urethane mixture is similar expansion rate is higher while number of 1 inch zigzag are high. For elasticity, zigzag stitch expand side ways for more expansion.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.243-250
• /
• 2000

The mechanical behavior of the underground box culvert constructed by the open cut method depends mainly on the earth pressure acting on it. In this study, the earth pressure on the underground box culverts constructed by the open cut method during and after the construction sequence was numerically analysed by using FLAC. The results are compared with those of the Marston-Spangler's theory, silo theory, and the model tests. The results showed that the vertical earth pressure on the upper slab of the box structure was not uniform. It was as large as the overburden in the middle part of the slab but was smaller or larger than that at its end part depending on the slope of the excavation, the depth of the cover, and the width of the side refill. The horizontal earth pressure on the side wail was much smaller than the earth pressure at rest and grew nonlinearly with the depth.