• Restorative Dentistry and Endodontics
• /
• v.24 no.2
• /
• pp.322-329
• /
• 1999

The hydrodynamic theory of dentin sensitivity states that movement of tubular contents or tubular fluid, in either direction of dentinal tubule, causes dentin sensitivity. A corollary of that theory is that anything that can decrease dentinal fluid movement or dentin permeability should decrease dentin sensitivity. A wide variety of physicochemical methods have been used to reduce the permeability and sensitivity of exposed dentin. The purpose of this study was to evaluate the ability of 4 kinds of clinical desensitizing agents(2% NaF, 30% Potassium oxalate, MS Coat$^{(R)}$, Tubulitec system$^{(R)}$) to reduce the rate of fluid flow through dentin in vitro. Sixty coronal dentin discs, 1mm in thickness, were prepared from extracted third molars, free from decay and wear. Dentin discs were treated with 3% EDTA(Tubulicid Plus$^{(R)}$(Dental Therapeutics AB, Sweden)) to remove the smear layer and debris occluding the tubular orifices. After placing the discs in a split chamber device, the rate at which physiologic saline solution could filter across dentin under 150cm $H_2O$ hydrostatic pressure was measured. The occlusal side of the discs were then treated with MS Coat$^{(R)}$, 2% NaF, Tubulitec system$^{(R)}$, and 30% Potassium oxalate, and the filter ratio of the saline solution was measured again. The following conclusions were drawn : 1. Hydraulic conductance which was measured after the application of desensitizing agents was decreased in all the groups(p<0.05). 2. % change of hydraulic conductance was compared but no significant difference was found among the four desensitizing agents(p>0.05). 2% NaF, 30% Potassium oxalate, MS Coat$^{(R)}$ and Tubulitec system$^{(R)}$ decreased the permeability of dentin. It is considered that above four agents can be used in treating the hypersensitive teeth.

• The Journal of Engineering Geology
• /
• v.24 no.1
• /
• pp.137-146
• /
• 2014

The geology of the study area which is located in Samkoe-dong, Dong-gu, Daejeon city comprises black slate, limestone, and pebble-bearing phyllitic rock as meta-sedimentary rocks; and biotite granite and quartz porphyry intrusions. Face mapping revealed sliding in three or four sites of contained coaly slate, where the dip of the foliation and other discontinuities is parallel to the surface slope. The cause of the slope sliding is this parallelism as well as the swelling of the coaly slate when wet. In contrast, the slop on the opposite side of the road is relatively stable because the dip of the foliation and other discontinuities are oblique or normal to the surface slope. To ensure slope stability, a cut-and-cover tunnel was designed and constructed for the new road.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.6
• /
• pp.419-423
• /
• 2015

The flowing caused by artificial upwelling structure occurs ascending water flowing and vortex of rear side. In this moment, plentiful nutrient in the bottom water moves to the surface of the water and makes those plankton and fishing ecology promoted so that the fishing productivity can be enhanced. In this study, the changes of the upwelling flowing is included in consideration of the conditions of stratification by using CFD. In the conclusion, the closer upwelling effect is from the artificial upwelling structure, the better effectiveness comes out. Regardless of the conditions of stratification, only the upwelling feature from the bottom to the surface was shown up. But considering the conditions of stratification, the repeated flowing feature between upwelling and downwelling was verified.

• Applied Biological Chemistry
• /
• v.28 no.4
• /
• pp.233-238
• /
• 1985

Glucoamylases catalyze a stepwise hydrolysis of starch with the production of glucose. In order to make an efficient conversion of starch into glucose, glucoamylases prepared from Rhizopus spp. (Sigma Co.) were attached to a porous glass and immobilized by glutaraldehyde-induced crosslinking. The porous glass used in this study was $ZrO_2$ coated, $40{\sim}80$ mesh, 550 A pore diameter. Using the forgoing glass, we could couple as much as 50mg of protein per gram of carrier. Substrate for the glucoamylase was an enzyrne-modified thin-toiling 30% cornstarch solution used where greater solubility and low viscosity are desired. Immobilized glucoamylase had an optimum pH 7.0 to the alkaline side of soluble enzyme. Km values of immobilized and soluble enzyme were 1.04 mM and 1.25mM, respectively. The thermal stability of glucoamylase was increased by immobilization and the immobilized enzyme showed an optimum temperature at $40{\sim}60^{\circ}C$. The continuous conversion of cornstarch to glucose by use of immobilized glucoamylase resulted in the production of a more than 90 DE product.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.37-44
• /
• 2019

Recentrly, early dental care for children is becoming more important, and the number of children patients' dental services is on the rise. So, a variety of seduction therapies are needed to alleviate the tension in children who are anxious about dental care. This paper describes the development process and contents of system that can display the animation of different stories according to the treatment stage by grasping the use state of the treatment device in real time. In the animation, the hreo character and the villain, the cavity character, appear and the hero defeat the villain at each treatment stage. Animation is played when treatment starts and ends after treatment. Current existing one-side played animation of dental clinics is not enough to attract children's attention. If the flow of animation changes depending on the treatment process, it will give children a different enjoyment and consequently ease the tension over the treatment.

• Journal of the Korean Institute of Gas
• /
• v.24 no.1
• /
• pp.49-55
• /
• 2020

Experimental investigations were conducted to understand the multi-staged combustion characteristics of a swirl-stabilized double cone premixed burner nozzle used for industrial gas turbines for power generation. Multi-staged combustion is implemented by injecting the fuel through the existing manifold of the side slots as well as through the apex of the cone with two fuel injection angles which are slanted or axial. NOx and CO emissions, and wall temperature distributions were measured for various fuel distributions and operating conditions. Results show that NOx emissions are decreased when the fuel distribution to the apex is 3% of the total amount of fuel, which is due to more uniform fuel distribution inside the nozzle, hence less hot spots at the flame. NOx emissions are rather increased when the fuel distribution to the apex is 8% of the total amount of fuel for axial fuel injection by occurrence of flash back in premixing zone of burner.

• Korean Institute of Interior Design Journal
• /
• no.5
• /
• pp.45-52
• /
• 1995

Frank Lloyd Wright, a master of the 20th Century Ar-chitecture, contributed tremendously in creating a wholly new form of American architecture called Prairie Style. His idea behind the development of the building structur-al system, organic relationships between inner and outer space, horizontal vertical lines, and idea of extending and expanding interior spaces came from nature. He had completed over 390 projects throughout his life and 90% of those projects were residential design. The most typical characteristic shared by many of his residential design was that each design element, whether it is functional or aesthetical, has close relationship to or-ganic nature, human scale, theoretical floor plants, and maximum emphasis on horizontal lines in respect to na-ture. His concept of "flow of spaces" reformed common the-ory of room next to room in a enclosed space. His sense of "wall" was no longer the side of a box. Careful selec-tion of finishing materials, colors, and natural images en-hance the design as well. F.L. Wright was an artist, designer, and architect who believed the exterior space should have direct relationship to the interior space. His architectural philosophy was not only to design exterior of architecture but also to ful-fill his space through the careful development of interior elements such as furniture, and lighting fixture. Even the patterns for leaded glass windows were designed to have unified appearance from outside to inside of the house. The objective of this study was to analyze floor plans, spatial organizations, and interior design elements of the houses which represent the best of F.L. Wright's design principles and philosophy behind Prairie Style. The meth-od used to collect informations for this study was based on books, articles, journals, and actual site visits. actual site visits.

• Journal of Korea Water Resources Association
• /
• v.32 no.6
• /
• pp.697-709
• /
• 1999

Two dimensional finite element model(RMA) is applied to examine sediment transport behavior near Buyeo water intake station of the Keum River. The simulation results of bed change with various discharge conditions agree with those of observation. As the alternatives of channel modification and resulting bed lowering near intake station, construction of jetties and removal of small island are considered. The station of jetties diverted the main stream toward the other side and the width of the main stream did not change so much. The bed elevation of the main channel is reduced about 5~20 cm, when flow condition of 12,030㎥/sec applied. The removal of small island provides the less significant effect on sediment movement. This study shows that the construction of jetties would be effective to reduce the entrainment of sediment.

• Biomolecules & Therapeutics
• /
• v.3 no.4
• /
• pp.316-321
• /
• 1995

All the pharmacological studies of LB17522 described here were carried out with high doses (fifteen to sixty times of the therapeutic dose) to determine an indication of potential side effects in clinical use in terms of the acute clinical signs, cardiovascular and central nervous system. LB10522 does not produce any observable clinical signs except for the symptoms such as moist eye, skin rash, slight salivation, vomitting, and slightly reduced activity. The effects of LB10522 on the hemodynamics and cardiac function of anesthetized beagle dogs are as follows; heart rates and mean arterial blood pressure had a tendency to increase mildly, which is a normal finding in anesthetized dogs. All the animals except for one showed relatively stable respiratory rates throughout the observation period. Each animal treated with LB10522 showed slight increase in the left cardiac work and left ventricular stroke work which are mainly related to corresponding increases in cardiac output. Femoral blood flow were shown to be increased in some animals treated with LB10522. The epileptogenic activities of various cephalosporins were assessed by a direct intracerebral injection of appropriate concentration of test articles. The CD$_{50}$ values (nmol) obtained from the analysis of the dose-response data are as follows; 78.2, 175.3, 156.3, and 53.5 for cefazolin, cephaloridine, ceftazidime, and LB 10522, respectively. LB10522 seems to be equipotent with cefazolin or to be three times more potent than cephaloridine and ceftazidime in causing adverse CNS stimulation. Taken into consideration all the information obtained, LB10522 is not supposed to induce much changes in the functions examined in these studies in man at therapeutic doses.s.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.5
• /
• pp.545-550
• /
• 2012

Steam generator is one of the major components of nuclear power plant and steam generator tubes are the pressure boundary between primary and secondary side, which makes them critical for nuclear safety. As the operating time of nuclear power plant increases, not only damage mechanisms but also scaled deposits on steam generator tubes are known to be problematic causing tube support flow hole blockage and heat fouling. The ability to assess the extent and location of scaled deposits on tubes became essential for management and maintenance of steam generator and eddy current bobbin data can be utilized to measure thickness of scale on tubes. In this paper, tube reference standards with various thickness of scaled deposit has been set up to provide information about the overall deposit condition of steam generator tubes, providing essential tool for steam generator management and maintenance to predict and prevent future damages. Also, methodology to automatically measure scale thickness on tubes has been developed and applied to field data to estimate overall scale amount.