• Information Systems Review
• /
• v.23 no.4
• /
• pp.87-102
• /
• 2021

Smart cities are attracting attention as a new economic growth engine based on new technologies and means to solve side effects of urbanization such as a surge in energy consumption, deepening environmental pollution, and an increase in crime rates. In particular, as demand for non-face-to-face services increases due to COVID-19, the role of smart cities that can provide various online and offline non-face-to-face services is becoming more important. Therefore, this study defined smart city non-face-to-face services based on literature research on the concept and underlying technology of smart city, and analyzed consumer utility for each service using Conjoint analysis. In particular, differences in user preferences between Sejong City and Busan City, which are currently designated as national smart city pilot cities in Korea, were compared and analyzed, and based on the derived results, measures to improve the competitiveness of smart city services were suggested.

• Carbon letters
• /
• v.15 no.2
• /
• pp.142-145
• /
• 2014

Isotropic synthetic graphite scrap and phenolic resin were mixed, and the mixed powder was formed at 300 MPa to produce a green body. New bulk graphite was produced by carbonizing the green body at $700^{\circ}C$, and the bulk graphite thus produced was impregnated with resin and re-carbonized at $700^{\circ}C$. The bulk density of the bulk graphite was $1.29g/cm^3$, and the porosity of the open pores was 29.8%. After one impregnation, the density increased to $1.44g/cm^3$ while the porosity decreased to 25.2%. Differences in the pore distribution before and after impregnation were easily confirmed by observing the microstructure. In addition, by using an X-ray diffractometer, the degrees-of-alignment (Da) were obtained for one side perpendicular to the direction of compression molding of the bulk graphite (the "top-face"), and one side parallel to the direction of compression molding (the "side-face"). The anisotropy ratio calculated from the Da-values obtained was 1.13, which indicates comparatively good isotropy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.3
• /
• pp.262-267
• /
• 2005

The air-side particulate fouling in the heat exchangers of HVAC applications degrades the performance of cooling capacity, pressure drop across a heat exchanger, and indoor air quality. Indoor and outdoor air contaminants foul heat exchangers. The purpose of this study is to investigate and to model the air-side particulate fouling characteristics of the heat exchangers using accelerated particle loading system. The main variables of the modeling equation are face velocity and dust concentration. The modeling equation shows good agreements with the experimental results at the face velocity of 0.5, 1.0, 1.5 m/s and the dust concentration of 1.28 and $3.84\;g/m^3$. It will be very useful to predict fouling characteristics such as variations of pressure drop and heat transfer capacity in finned-tube heat exchangers of air conditioners.

• Proceedings of the Optical Society of Korea Conference
• /
• 2009.02a
• /
• pp.147-148
• /
• 2009

We have fabricated a down tapered polymer tip on optical fiber end-face by a guided UV light. One side of fiber was aligned with a mercury-xenon lamp and another was put into UV curable polymer. A shape of tip was controlled by adjusting an irradiance of lamp and time of exposure. A bending effect also affects the result. Optical characteristic was achieved preliminarily with solution of minute particles.

• Journal of Korea Multimedia Society
• /
• v.16 no.8
• /
• pp.927-933
• /
• 2013

Face detection algorithm of OpenCV recognizes the faces by Haar matching between input image and Haar features which are learned through a set of training images consisting of many front faces. Therefore the face detection method by Haar matching yields a high face detection rate for the front faces but not in the case of the pan and deformed faces. On the assumption that distributional characteristics of color histogram is similar even if deformed or side faces, a face detection method using the histogram pattern matching is proposed in this paper. In the case of the missed detection and false detection caused by Haar matching, the proposed face detection algorithm applies the histogram pattern matching with the correct detected face area of the previous frame so that the face region with the most similar histogram distribution is determined. The experiment for evaluating the face detection performance reveals that the face detection rate was enhanced about 8% than the conventional method.

• Journal of Mechanical Science and Technology
• /
• v.17 no.11
• /
• pp.1801-1811
• /
• 2003

An experimental study was conducted to investigate the effects of air-side fouling and cleaning on the performances of various condenser coils used in unitary air-conditioning systems. A total of six condenser coils with different fin geometry and row number were tested. Performance tests were performed at three different conditions: clean-as-received, after fouling, and after cleaning. In all cases, it was observed that the fouling was mostly confined to the frontal face of the heat exchanger as reported in the previous investigations. The amount of deposited dust was more dependent on fin geometry for the single-row heat exchangers than for the double-row heat exchangers. The predominant effect of fouling was to cause a more significant increase in air-side pressure drop than a degradation in heat transfer performance. For the single-row heat exchangers, the pressure drop increased by 28 to 31%, while the heat transfer performance decreased by 7 to 12% at the standard air face velocity of 1.53 m/s depending on fin shape. For the double-row heat exchangers, the pressure drop increased by 22 to 37%, and heat transfer performance decreased by only 4-5% at the same air face velocity. Once the contaminated coils were cleaned according to the given cleaning procedure the original performance of the heat exchangers could almost be recovered completely. The pressure drop could be restored within 1 to 7% and the heat transfer performance could be recovered to within 1 to 5% of the originally clean heat exchangers. Therefore, it is concluded that a periodic application of the specified cleaning technique will be effective in maintaining the thermal performance of the condenser coils.

• Archives of Craniofacial Surgery
• /
• v.24 no.2
• /
• pp.66-72
• /
• 2023

Background: During the coronavirus disease 2019 (COVID-19) pandemic, the everyday use of face masks massively increased to prevent the spread of infection. Many people complain of ear pain and erosion when wearing a mask for extended periods of time. If prolonged mask usage is uncomfortable for ordinary people, a question arises-how much more inconvenient must mask wearing be for patients with a full-thickness skin graft (FTSG) donor site in the retroauricular region? Herein, we evaluated complications related to face mask use in 27 patients with a retroauricular FTSG donor site, with the goal of clarifying whether the retroauricular region is still an appropriate FTSG donor site in the context of the COVID-19 pandemic. Methods: Complications in 27 patients treated by FTSGs harvested from the retroauricular region from 2019 to 2021 were investigated. A questionnaire comparing the normal and the operated sides was administered. Pain, itching, soreness, deformity, and symmetry were further investigated. Results: Pain and itching were the only observed complications. The operated side was slightly more painful than the normal side in four patients (14.8%), and four patients (14.8%) reported itching on the operated side. However, all patients who experienced complications stated that the pain or itching did not interfere with mask wearing. Most symptomatic patients were older than 60 years of age (23.8%, p= 0.185) and wore masks for longer periods of time (28.5%, p= 0.326). Conclusion: Few retroauricular donor site-related complications occurred, and none of these complications caused inconvenience in daily life. Therefore, in the COVID-19 pandemic, the use of the retroauricular region as an FTSG donor site remains appropriate.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.116-121
• /
• 1999

Since the material flow near the die part in CONFORM (Continuous Extrusion Forming) process is similar to that of side-extrusion, the side-extrusion model of tube shaped aluminum profiles was studied for the die design in CONFORM process. In this paper, the effects of process parameters in the side -extrusion through a two-hole die face, such as material flow, height and thickness of the tube, velocities of punch and lengths of bearing land were investigated using UBET program and DEFORM commercial FEM code. The optimum lengths of the bearing lands and punch velocities for obtaining the straight shape products required were determined.

• Journal of Korea Multimedia Society
• /
• v.22 no.5
• /
• pp.535-546
• /
• 2019

Recently, there have been a lot of researches on the whole face replacement system, but it is not easy to obtain stable results due to various attitudes, angles and facial diversity. To produce a natural synthesis result when replacing the face shown in the video image, technologies such as face area detection, feature extraction, face alignment, face area segmentation, 3D attitude adjustment and facial transposition should all operate at a precise level. And each technology must be able to be interdependently combined. The results of our analysis show that the difficulty of implementing the technology and contribution to the system in facial replacement technology has increased in facial feature point extraction and facial alignment technology. On the other hand, the difficulty of the facial transposition technique and the three-dimensional posture adjustment technique were low, but showed the need for development. In this paper, we propose four facial replacement models such as 2-D Faceswap, OpenPose, Deekfake, and Cycle GAN, which are suitable for the Cox platform. These models have the following features; i.e. these models include a suitable model for front face pose image conversion, face pose image with active body movement, and face movement with right and left side by 15 degrees, Generative Adversarial Network.

• Journal of Chest Surgery
• /
• v.26 no.11
• /
• pp.886-889
• /
• 1993

The DiGeorge syndrome is a rare congenital anomaly of absent or hypoplastic thymus and parathyroid glands. Authors experienced a case of DiGeorge syndrome with complex cardiac anomaly. The complex cardiac anomaly was tetralogy of Fallot with origin of the right pulmonaly artery from the posterolateral ascending aorta.His face showed hypertelorism,short philtrum,"fish-like"mouth and micrognathia. This patient underwent total correction of tetralogy of Fallot and end-to-side anastomosis between right pulmonaly artery and side of main pulmonaly artery. He expired on postoperative second day due to right heart failure and hypoxia.d hypoxia.