• Textile Coloration and Finishing
• /
• v.17 no.6 s.85
• /
• pp.27-35
• /
• 2005

Conventional pad- dry-cure(thermo-fixation) process usually produces functional performance on both sides of a fabric. UV curing technique was applied to impart water- and oil-repellent finish effective only on the face of a PET knitted fabric. The preferential one-side coating, by virtue of the limited penetration of UV light, was achieved by W curing after padding of a fluorocarbon agent without special coating or printing equipments. The difference in the functional property of face and back sides was examined by measuring water and oil repellency at each side of the treated fabric. The influence of pre/post-irradiation dose and agent concentration on the performance of the finished fabrics were investigated. While increase in both resin concentration and post-irradiation did not have significant effect on the finish, UV pre-irradiation of PET fabrics caused remarkable influence presumably due to appropriate surface modification of PET fabrics required for facile wetting of the resin. The dimensional stability and color change of the UV cured fabrics measured by FAST and reflectance spectrophotometry showed significantly decreased color difference and increased percent extension compared with the samples pre-irradiated without agent application.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.6
• /
• pp.379-384
• /
• 2020

Objectives: We sought to identify a clinically useful method of analyzing orbital dystopia to aid in diagnosis and treatment planning and to quantify vertical discrepancies in eye level and variations in canthal tilt in Koreans. Patients and Methods: In 76 Korean patients with a mean age of 23.12 years, mean differences in the level of the pupils, lateral canthi, medial canthi, and canthal tilt were measured. The difference in pupil level was calculated from the perpendicular lines drawn from the midpupil area of each eye to the midline of the face to determine the amount of skeletal discrepancy of the eye. Soft tissue discrepancies were determined according to the vertical difference between the lines drawn from the lateral or medial canthus of each eye perpendicular to the midline of the face. The canthal tilt was determined from the inclination of a line connecting the lateral and medial canthi, then classified as class I, II, or III. Results: Mean differences in pupil level, medial canthi, and lateral canthi were 1.57±1.10 mm, 1.14±1.07 mm, and 2.03±1.64 mm, respectively. The mean degree of canthal tilt were 8.45°±3.53° for the right side and 8.42°±3.81° for the left side. No study participants presented with class III canthal tilt. The mean canthal tilt values for those with class I tilt were 3.21°±1.68° for the right side and 3.18°±1.63° for the left side, while, for those who had class II tilt, the values were 9.60°±3.66° for the right side and 9.54°±2.99° for the left side. Conclusion: The presented diagnostic method of orbital dystopia can be used to effectively establish a treatment plan that takes into consideration the patient's skeletal and soft-tissue discrepancies.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.67-84
• /
• 1979

The author measured the right and left craniofacial skeleton using posteroanterior cephalography of 124 male and 97 female subjects of ages ranging 2-6 years, 7-13 years and adult group on Korean. Statstical parameters were calculated by computer from the data. The results of the study were as follows. 1. In the male and female group of deciduous dentition, the right side measurements were slightly greater than the left side measurements, and generally male measurements were greater than female measurements. 2. In the both sex group of mixed dentition, the right side measurements were greater than the left side measurements, and in comparision of sex, the female recognized more growth, and development than male, especially on the cranial base, lateral maxilla, lower maxilla and dental region. 3. In the permanent dentition group, regardless of sex, the right side measurements were greater than the left side measurements, and in the sex difference, male was conspicuously greater than female on both sides measurements. 4. In the permanent dentition group, the asymmetry of the face was striking than deciduous dentition and mixed dentition group.

• Journal of Oriental Neuropsychiatry
• /
• v.11 no.1
• /
• pp.97-102
• /
• 2000

In the study of psychosomatic disorders caused by Qi-experience, the results were as follows: 1. People are becoming more and more interested in qigong, but sometimes peple are suffer from side effects from Qi-experience. In oder to treat this side effects of qigong, it is important to control Qi unbalance. And this is associated with the mechanism of stress-reaction. 2. The causes of side-effects were tension of body and mind, concentration of head, enduring breath, and wrong qigong-method, etc. 3. The symptoms of side-effects were headache, flushing face, chest discomfort, neck stiffness, indigestion, etc. 4. The theraphy of side-effects is herb-medicine, acupuncture, moxibution, and more effective by application of psychotheraphy, relaxation-theraphy, music, aroma, taping.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.16 no.4
• /
• pp.390-395
• /
• 1994

The author evaluated the nasal asymmetry after primary operations in the patients with unilateral cleft lip using full face photographs. The results are as follows : 1. Nasal deviation angle is average 2.98+3.01 degree(ranged from 0 to 10 degree), significantly different from control group(p<0.05). 2. Nasal deviation angle is average 5.1% when inter-medial canthal distance is 100%, significantly different from control group(p<0.05). 3. Difference in nostril size between cleft and noncleft side is 2.1% when inter-medial canthal distance is 100%, significantly different from control group(p<0.05). 4. Nasal attractiveness analysis shows higher points in difference in nostril size, nasal deviation, nasal form in that order. 5. Nasal asymmetry after primary operations in the patients with unilateral cleft lip using full face photographs is related with Nasal deviation angle, Nasal deviation distance and Difference in nostril size between cleft and noncleft side.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.310-315
• /
• 2000

We analyzed thermal stress of the STS VOD ladle by the variation of material property of refractory, and determined the location of back filler using FE analysis. Thermal distribution of refractory of ladle between hot face and back face were decreased by the increasing the thermal conductivity, and thermal stress of refractory were decreased about 2 to 4 times with the decreasing the young's modulus coefficients. Back filler, which is constructed to absorb the thermal expansion of dolomite refractory, has relatively low thermal conductivity. Inner side of refractory of ladle maintained high temperature, but temperature of outer side of ladle decreased low. Consequently, inner expansion and outer contraction were appeared. and thermal stress were increased, so thermal stress by the construction of back filler were increased.

• Journal of The Korean Society of Integrative Medicine
• /
• v.7 no.2
• /
• pp.31-38
• /
• 2019

Purpose : This study aimed to investigate the correlation between social participation and interpersonal relationships after stroke. Methods : Scores for the Korean version of the Reintegration to Normal Living Index (K-RNLI) and the Relationship Change Scale (RCS) were determined using a face-to-face test for 98 patients who had a stroke between September 3, 2018, and January 10, 2019. SPSS 22.0 was used for the analysis, and the correlation coefficient between social participation and interpersonal relationships was determined. Results : According to the patients' general characteristics, social participation was related to sex, type of lesion, and affected side, and interpersonal relationships showed a significant difference with respect to the affected side (p<.05). The analysis of social participation and interpersonal relationships of the subjects revealed a high correlation with total score (r=.364; p<.01), and all the items showed correlations except sensitivity (p<.05). Conclusion : Social participation and interpersonal relationships are important factors for reintegrating stroke patients into the community. The results of this study suggest a clinical basis for rehabilitation interventions in stroke patients.

• Tribology and Lubricants
• /
• v.14 no.2
• /
• pp.49-56
• /
• 1998

The thermal deformation of the contact seal components has been analyzed using the finite element method. The temperature distributions, the thermal deformations and contact stresses are solved numerically for the contact surface with wear coning effects. The thermal deformation is always shown to distort the sealing surface along the radius of the seal ring. The results show that the deformations of inner radius side are significant compared with those of outer radius. Thus, the thermal deformation due to thermal heatings may promote the coned face wear or wear related thermal cracks at the contacting face of the seal ring component.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.05e
• /
• pp.15-18
• /
• 2003

In this paper, We explained the best shape design of electrode for discharge on the water. Electrode with rounding was reduced maximum electric field of over 40% to electrode without rounding for discharge on the water and the best shape of electrode for discharge on the water designed when shape of electrode had a curve radius of over $60^{\circ}$ at electrode's face to electrode's face with minimum distance and a curve radius of under $120^{\circ}$ at electrode's side face to electrode's front face. And When dielectric beads are used between electrodes, the life of electrodes is improved by lower stress of electric field on surface of electrodes.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1998.04a
• /
• pp.149-158
• /
• 1998

The thermal deformation of the contact seal components has been analyzed using the finite element method. The temperature distributions, the thermal deformations and contact stresses are solved numerically for the contact surface with wear coning effects. The thermal deformation is always shown to distort the sealing surface along the radius of the seal ring. The results show that the deformations of inner radius side are significant compared with those of outer radius. Thus, the thermal deformation due to thermal heatings may promote the coned face wear or wear related thermal cracks at the contacting face of the seal ring component.