• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.2
• /
• pp.139-146
• /
• 2011

The breaking wave pressure occurs when a plunging breaker instantaneously impinges on structural surface, and appears differently depending on whether or not to form air pockets at the instant of contact. The Wagner type normally forms a single pressure peak at the contact spot due to the direct collision of water volume to the structure whereas in the Bagnold type the time lagged oscillation of the air pocket causes pressure peaks even at areas away from the spot. In the present study, the Bagnold's impact pressure is numerically and experimentally investigated for the bulkhead of an underwater tunnel under construction which is subjected to nearby breaking waves. A numerical solver of Navier-Stokes equations was applied to reproduce the breaking waves near a bulkhead, and the results showed the Bagnold's impact pressure occurring on the back (land side) face of the bulkhead. The existence of the impact pressure was also verified by a hydraulic model testing, and it was found that the experimental results well conformed to their numerical counterparts.

• The Journal of the Korea Contents Association
• /
• v.20 no.9
• /
• pp.68-85
• /
• 2020

Mukbang, which appeared through the new media platform in the early 2000s, reflected the life of the young generation who had to eat alone in the face of deteriorating socio-economic conditions. Many young people were able to watch Mukbang together, and gain comfort by establishing a virtual community of everyday life with those who suffered similar difficulties. Since then, Mukbang has evolved into various forms, reflecting the society and also accommodating the needs of viewers, and now it has become a global phenomenon, not just in Korea. Early research focuses on the phenomenon as a bizarre side that appears in the early stages rather than the growth and change of Mukbang, and deals with it in a limited way. This article critically examines these limitations, and examines how the growth and development of Mukbang interacted with the social change process, and how the uniqueness of Mukbang could emerge in the characteristics of the new media. Through this, we will be able to look at the context of the growth of Mukbang as a global phenomenon and the impact on the legacy media.

• Journal of Digital Convergence
• /
• v.11 no.4
• /
• pp.57-69
• /
• 2013

Progresses in ICT make the processing and exchange of personal data across international borders often necessary and relatively easy. The challenge lies in protecting fundamental rights and freedoms of individuals, notably the right to privacy and the right to personal information, while encouraging the free and secure flow of information across borders for the continued expansion of online transactions. The key to establishing a functioning international solution for personal data protection is to strike a right balance between the two camps which currently dominate the debate - the advocates of individual privacy rights on one side exemplified by the EU, and the proponents of self-regulation and economic efficiency on the other, represented by the U.S. In the face of a growing tension between the two sides each equipped with their own ideals, a practical solution may lie in utilizing established institutions of standardization such as ISO and IEC as a ground upon which an agreement can take its root.

• Journal of Digital Convergence
• /
• v.18 no.11
• /
• pp.459-464
• /
• 2020

This study is a study that analyzes the user experience of a virtual makeup application in the beauty industry where color or formulation testing is important. Recently, cases of beauty smart stores and beauty applications using AR and AI are increasing. However, since virtual makeup is different from testing a real product, it is necessary to derive needs through research from the user's side. In order to compare user preferences by using AR and AI cases, six factors based on the emotional interface model were analyzed through a questionnaire to identify items with statistically significant figures. As a result, the user felt comfortable with the virtual makeup function, but showed that it needs to be supplemented in terms of reliability. Since this study focused on the customer experience as a real user and identified the main experience factors and needs of virtual makeup through two types of comparison, it is hoped that this study will be useful as a prior study.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.10
• /
• pp.118-128
• /
• 2015

Compressive sensing (CS) has to face with two challenges of computational complexity reconstruction and low coding efficiency. As a solution, this paper presents a novel spatially scalable Kronecker two layer compressive sensing framework which facilitates reconstruction up to three spatial resolutions as well as much improved CS coding performance. We propose a dual-resolution sensing matrix based on the quincunx sampling grid which is applied to the base layer. This sensing matrix can provide a fast-preview of low resolution image at encoder side which is utilized for predictive coding. The enhancement layer is encoded as the residual measurement between the acquired measurement and predicted measurement data. The low resolution reconstruction is obtained from the base layer only while the high resolution image is jointly reconstructed using both two layers. Experimental results validate that the proposed scheme outperforms both conventional single layer and previous multi-resolution schemes especially at high bitrate like 2.0 bpp by 5.75dB and 5.05dB PSNR gain on average, respectively.

• Journal of architectural history
• /
• v.21 no.2
• /
• pp.7-20
• /
• 2012

As the corner of wooden pagoda forms the roof by closely bordering left and right eaves on the various purlins and angle rafters, it is designed for every face to be recognized as front whose structure system increases load to bear proportionally. The corner of wooden pagoda is inseparable with the corner bracket set as it becomes stable thanks to the corner bracket set structurally and load burden under restrained structure makes the corner bracket set really important. Accordingly, this study could figure out some facts by analyzing corner bracket sets of Palsangjeon of Beobjusa Temple in Korea, Seokgatap of Bulgungsa Temple in China and Ojungtap of Beobryungsa Temple in Japan which were constructed with pure wooden structure. This study demonstrated that corner bracket set played a pivotal role in keeping balance of concentrated load of corner (corner of opening) in each floor that contributed to the stability of wooden pagoda structurally despite multiple duplications of floors and also figured out the outfit of corner bracket set was subject to the floor type and the cross section of Gongpo installed on top of Pyeongju. Wooden pagodas in 3 countries were two floor types of octagon and square, and employed different connection method between upper and lower floors. The difference between floor and duplication method determines the method of corner, but even different methods were sufficient to have entirety in every side by completing dynamic principle of corner bracket set even though old method had to solve the problem of concentrated load and it also confirms that it was essential Gongpo to prevent any deformation of corner.

• Archives of Craniofacial Surgery
• /
• v.19 no.2
• /
• pp.135-138
• /
• 2018

Parry-Romberg syndrome is a rare neurocutaneous syndrome characterized by progressive shrinkage and degeneration of the tissues usually on only one side of the face. It is usually difficult to restore the facial contour due to skin tightness. In this case report, we report a forehead reconstruction with custom-made three-dimensional (3D) titanium implant of a Parry-Romberg syndrome patient who was treated with multiple fat grafts but had limited effect. A 36-year-old man presented with hemifacial atrophy. The disease progressed from 5 to 16 years old. The patient had alopecia on frontal scalp and received a surgery using tissue expander. The alopecia lesion was covered by expanded scalp flap done 22 years ago. Also, he was treated with fat grafts on depressed forehead 17 years ago. However, it did not work sufficiently, and there was noted depressed forehead. We planned to make 3D titanium implant to cover the depressed area (from the superior orbital rim to the vertex). During the operation, we confirmed that the custom-made 3D implant accurately fit for the depressed area without any dead spaces. Previously depressed forehead and glabella were elevated, and the forehead contour was improved cosmetically. A custom-made 3D titanium implant is widely used for skull reconstruction and bring good results. In our case, the depressed forehead of a Parry-Romberg syndrome patient was improved by a 3D titanium implant.

• Fashion & Textile Research Journal
• /
• v.5 no.5
• /
• pp.443-452
• /
• 2003

People have been getting interested in the Orientalism and it has come up in various areas due to scientific progress. I designed uniforms, which was simple and western, to show its symbolic meanings in the Orientalism. And I have been trying to generalize uniforms with originality and beauty. I have studied the process of the Orientalism and its changes and transitions, concepts and origins in history. And I applied the styles of Korean, Japanese and Chineses costume on it. I also referred to characters of uniforms, which already had images of Korea, Japan and China. Firstly, Korean styles have a contrast in colors by application of Taegeuk. And they gave lines with dark colors in black one-piece dress. This makes people who are wearing looking slimmer. White ramie top looks fresh and Korean traditional tie called Maedeup is set up for button. Secondly, Japanese styles were mainly Kimono style, one piece. They changed into two pieces designed to be active. So, it has emphasized the image of Kimono with Obi at the waist. Thirdly, Chinese styles basically are Chipao style, which has a Chinese collar and a long skirt, which has opening. But they gradually changed into short skirts and more open in the chest. For one of them, they gave lines in the side of chest, sleeves and skirt to be more natural. The costumes have kept their positions as a part of mass society that grows and changes with speed. And oriental uniforms are not just uniforms any longer only for work. It is quite symbolic like a 'second face' as it represents images for their countries and enterprises.

• Architectural research
• /
• v.13 no.3
• /
• pp.31-40
• /
• 2011

Profit-keeping behaviors naturally occur in the market to satisfy consumers, and the logic behind it lies in the economies of scale. On the flip side, some commodities transacted in the market are not available or can not be easily acquired unless the demand is high enough. Under this proposition, some consumers rise and find their own solution to meet the services at a reasonable cost or at an adequate level. The commonly adopted way is to establish a cooperative, and it stirs purchasing power by pooling resources and further bargains price and service quality. As a consumer cooperative, housing cooperatives notably found in rural towns enable the elderly to continue independent living. This study is to take a closer look at residential life of the rural elderly in housing cooperatives. Utilizing in-depth focus group interviews with 40 residents in four housing cooperatives, this qualitative research draws main factors affecting the decision to move in, residential assessment, and strengths and weakness of living in a housing cooperative. The primary factor influencing the moving decision is to continue to independent living in a familiar community, and the bottom line is planning ahead. Frailty and bereavement are found to be the leading occasions for them to move. The participants are satisfied with the independent living arrangement, and particularly, cited such features as safety and security, elderly-friendly design, common spaces, freedom, social activities and efficient living. Also, it is stated that some cooperative natures such as control over the property and giving a voice on management render positive impacts on the satisfaction with communal living. In spite of all the benefits and strengths, participants face with a public notion that an independent living arrangement like a housing cooperative has never done before in rural towns, so that most people recognize it as part of dependent living arrangements like nursing home.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.1
• /
• pp.54-68
• /
• 2001

This paper proposes a new algorithm that detects and separates the occluding and occluded objects in a 2D image. An input image is represented by the attributed graph where a node corresponds to a surface and an arc connecting two nodes describes the adjacency of the nodes in the image. Each end of arc is weighted by relation value which tells the number of edges connected to the surface represented by the node in the opposite side of the arc. In attributed graph, homogeneous nodes pertained to a same object always construct one of three special patterns which can be simply classified by comparison of relation values of the arcs. The experimental results have shown that the proposed algorithm efficiently separates the objects overlapped arbitrarily, and that this approach of separating objects before matching operation reduces the matching time significantly by simplifying the matching problem of overlapped objects as the one of individual single object.