• Journal of the Korean Vacuum Society
• /
• v.9 no.2
• /
• pp.136-143
• /
• 2000

$SrBi_2Ta_2O_9;(SBT)$ films were deposited on p-type Si(100) at room temperature by rf magnetron sputtering method to confirm the possibility of application of $Pt/SBT/Pt/Ti/SiO_2/Si$ structure (MFM) for destructive read out ferroelectric RAM (random access memory). Their structural characteristics with the various annealing times and Ar/$O_2$ gas flow ratios in sputtering were observed by XRD (X-ray diffractometer) and the surface morphologies were observed by FE-SEM (field emission scanning electron microscopy), and their electrical properties were observed by P-V (polarization-voltage measurement) and I-V (current-voltage measurement). The Ar/$O_2$ gas flow ratios of sputtering gas were changed from 1 : 4 to 4 : 1 and SBT thin films were deposited at room temperature. The films show (105), (110) peaks of SBT by XRD measurement. SBT thin films deposited at room temperature were crystallized by furnace annealing at 80$0^{\circ}C$ in oxygen atmosphere during either one hour or two hours. Among their electrical properties, P-V curves showed shaped hysteresis curves, but the SBT thin films showed the asymmetric ferroelectric properties in P-V curves. When Ar/$O_2$ gas flow ratios are 1 : 1, 2: 1, the leakage current density values of SBT thin films are good, those values of 3 V, 5 V, and 7 V are respectively $3.11\times10^{-8} \textrm{A/cm}^2$, $5\times10^{-8}\textrm{A/cm}^2$, $7\times10^{-8}\textrm{A/cm}^2$.After two hours of annealing time, their electrical properties and crystallization are improved.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.167-167
• /
• 2012

최근 들어 유연한 폴리머 기판을 이용한 차세대 Flexible display는 다양한 장점으로 인해 많은 연구가들에 의해 유망한 차세대 디스플레이로 주목받고 있다. 일반적 폴리머 기판은 산소, 수분 등에 취약하기 때문에 무기막 또는 멀티레이어를 증착한다. 본 연구는 remote-type과 direct-type DBD로 구성되어 있는 double discharge system을 이용한 SiOx 무기막 증착 실험에 관한 연구이다. 본 연구에서는 HMDS/$O_2$/He/Ar gas mixture를 통해 발생된 대기압 플라즈마를 이용하여 공정을 진행하였다. SiOx를 증착할 때 SiOx 무기막 증착 실험은 $O_2$의 유량이 감소할수록 그리고 HMDS의 유량이 증가함에 따라 deposition rate, 즉 공정효율이 증가하는 것을 알 수 있었다. 하지만 HMDS의 유량이 증가하고 $O_2$ gas 유량이 감소함에 따라 carbon과 hydrogen 등의 불순물의 함유도 함께 증가하게 되고 이로 인해 무기막의 특성이 약해지고, 유기적인 막 특성이 강해지게 된다. Double discharge system을 사용하였을 경우에는 remote-type DBD system을 사용하였을 때 보다 더 높은 공정 효율을 관찰할 수 있었고 동시에 더 낮은 불순물 함량을 가지는 것을 알 수 있었다. 이는 기판에 추가적으로 인가되는 power에 따라 discharge efficiency가 향상되어 Si-O bond 결합을 유도, 무기막적 특성이 강해지고, 또한 기판 바이어스 효과에 따라 증착무기막의 기계적인 강도 역시 향상됨을 관찰할 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.250-250
• /
• 2011

Pulsed DC magnetron sputter 진공 웹코팅 연속증착기를 사용하여 PET 또는 PEN 기판 위에 Al2O3 가스 배리어 박막을 형성 하였다. 주사전자현미경 측정으로 표면을 분석하였고, PERMATRAN-W3/33을 사용하여 투습률 값을 결정하였다. PEN과 PET 기판위의 가스 배리어 막 모두 O2 분압이 증가 할수록 투습률이 증가하였다. O2 분압이 증가함에 따라 결정립들 사이에 크랙이 발생하여 투습률값에 영향을 미치는 것을 확인하였다. PET 보다 PEN 기판위에 증착막이 더 O2분압이 증가할수록 크랙이 증가하였다. PET 위에 SiO2, SiOC 및 SiON 박막을 증착하여 SiO2는 두께에 따른 변화를 SiOC와 SiON는 부분압의 변화에 따른 투습률값과 투과도값을 측정하였다. SiO2 박막 두께가 500 nm일 때 최소의 투습률인 6.63 g/m2/day를 얻었고, SiO2 박막 두께가 $1{\mu}m$ 일 때 투습률값이 9.46 g/m2/day로 증가하였다. 투과도값은 두께가 증가할수록 감소하는 것을 보였다. 이러한 결과는 투습률값이 두께 변화에 따른 영향보다 표면의 결정립들의 영향에 더 민감함을 알 수 있었다. 부분압이 $6.6{\times}10^{-4}Torr$일 때 SiOC와 SiON의 최소의 투습률이 각각 7.85 g/m2/day 이고 8.1 g/m2/day 이며 SiOC 박막의 투습률 보다 작았다.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.55-61
• /
• 2011

In order to develop economical production process from metallurgical grade silicon(MG-Si) to solar grade(SOG-Si), removal of boron by slag treatment was investigated at 1823 K using CaO-$SiO_2$ based slags. In the present study boron removal ratio in CaO-$SiO_2$ stags and $CaCO_3-SiO_2$ slags were increased to 63% and 73% respectively with slag basicity (%CaO/$%SiO_2$). However, bubbling time with Ar gas of slag and metal was not affected on removal ratio of boron. The addition of $Na_2CO_3$ to CaO-$SiO_2$ slags did not improve the removal ratio of boron from molten silicon. Boron contend was decreased from 20.6 ppm to 1.03 ppm by three times treatment using $CaCO_3-SiO_2$ slag (basicity=1.2).

• Bulletin of the Korean Chemical Society
• /
• v.31 no.11
• /
• pp.3283-3290
• /
• 2010

The gas-phase dehydration of glycerol to acrolein was carried out over 10 wt % HSiW catalysts supported on different supports, viz. $\gamma-Al_2O_3$, $SiO_2-Al_2O_3$, $TiO_2$, $ZrO_2$, $SiO_2$, AC, $CeO_2$ and MgO. The same reaction was also conducted over each support without HSiW for comparison. Several characterization techniques, $N_2$-physisorption, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), the temperature-programmed desorption of ammonia ($NH_3$-TPD), temperature-programmed oxidation (TPO) with mass spectroscopy and CHNS analysis were employed to characterize the catalysts. The glycerol conversion generally increased with increasing amount of acid sites. Ceria showed the highest 1-hydroxyacetone selectivity at $315^{\circ}C$ among the various metal oxides. The supported HSiW catalyst showed superior catalytic activity to that of the corresponding support. Among the supported HSiW catalysts, HSiW/$ZrO_2$ and HSiW/$SiO_2-Al_2O_3$ showed the highest acrolein selectivity. In the case of HSiW/$ZrO_2$, the initial catalytic activity was recovered after the removal of the accumulated carbon species at $550^{\circ}C$ in the presence of oxygen.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.95-95
• /
• 2009

대기압 플라즈마 발생장치를 이용한 식각장비 개발은 낮은 공정단가, 저온 공정, 다양한 표면처리 응용 효과와 같은 이점을 가지고 있어 현재, 많은 분야에서 연구되고 있다. 본 연구에서는, dielectric barrier discharge(DBD) 방식을 이용한 대기압 발생장치를 통해 평판형 디스플레이 제작에 응용이 가능한 $SiO_2$ 층의 식각에 대한 연구를 하였다. $N_2/NF_3$ gas 조합에 $CF_4$ 또는 $C_{4}F_{8}$ gas를 부가적으로 첨가하였다. 이때 N2 60 slm / NF3 600 sccm/CF4 7 slm/Ar 200 sccm의 gas composition에서 최대 260 nm/min의 식각 속도를 얻을 수 있었다.

• Journal of the Korean Ceramic Society
• /
• v.39 no.2
• /
• pp.210-215
• /
• 2002

Optical Band-pass Filter(BPF) for the selected wavelength of 4300 nm was designed and fabricated on Si wager by alternately depositing Ge and $SiO_2$ thin layers by an electron beam evaporation technique. The fabricated BPF showed the optical transmittance characteristics of 58.2% with FWHM(Full Width at Half Maximum) of 204 nm at 4300 nm, but showed the transmittance less than 5% due to the reflectance over all the wavelength ranges except 4300 nm band. The $CO_2$ sensitivity of BPF was investigated with the transmittance as a function of $CO_2$ gas concentration using a sensing cell attached to FT-IR instrument. The transmittance of BPF was almost linearly decreased with increasing of $CO_2$ concentration in the range of from 500 to 5000 ppm. The sensing structure using double BPFs showed higher slop of transmittance vs $CO_2$ concentration, and thus higher gas sensitivity than that using a single BPF, even though the former had relatively lower transmittance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.5
• /
• pp.709-715
• /
• 1990

SiO2 films were nitrided by tungsten-halogen heated rapid thermal annealing in ammonia gas at temperatures of 900-1100\ulcorner for 15-180sec. The nitroxide films were analyzed using Auger electron spectroscopy. MIS caapcitors were fabricated using these films as gate insulators. I-V and C-V characteristics of MIS capacitors were investigated. The AES depth profiles of nitroxide film show that the nitrogen rich layer is, at the early stage of nitridation, formed at the surface of nitroxide film and near the interface between nitroxide and silicon. Nitridation of SiO2 makes the film have a larger effective average refractive index. The thermal nitridation of SiO2 on silicon causes the flatband voltage shift due to the change of the fixed charge density. It is found that the dominant conduction mechanism in nitroxide is Fowler-Nordheim tunneling. Rapid thermal nitridation of 200\ulcornerSiO2 on silicon results in an improvement in the dielectric breakdown electric field.

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.190-197
• /
• 1992

In this study we have investigated physical and electrical properties of high temperature oxide (HTO) thin film using dichlorosilane (DCS) gas. This film had low etch rate and excellent step coverage, and its characteristics of Si-O bond were similar to those of thermal oxide. I-V curves also showed similar electrical properties to those of thermally grown oxide (SiO2) while time dependent dielectric breakdown (TDDB) results revealed 1/4 value of thermal oxide. However, defect density was measured to be much lower value than that of thermal oxide.

• Journal of Sensor Science and Technology
• /
• v.5 no.1
• /
• pp.30-36
• /
• 1996

ZnO thin-film sensors were fabricated by RF magnetron sputtering method. The composition of the device material was 4 wt. % $Al_{2}O_{3}$, 1 wt. % $TiO_{2}$ and 0.2 wt. % $V_{2}O_{5}$ on the basis of ZnO material for developing the high sensitive TMA gas sensor which have an appropriate resistivity and the stability for practical use. They were also grown on the $SiO_{2}/Si$ substrates heated at $250^{\circ}C$ under a pure oxygen pressure of about 10 mTorr with a power of about 80 watts for 10 minutes. So as to enhance the stability of the resistivity, the thin films were annealed from $400^{\circ}C$ to $800^{\circ}C$. The sensors made with the thin film which were annealed at $700^{\circ}C$ for 60 minutes in pure oxygen gas exhibited a good sensing properties for TMA gas. The thin film grown at this condition showed the maximum sensitivity of 550 in TMA gas concentration of 160 ppm, and exhibited a good stability and excellent linearity.