• Journal of the Korean Wood Science and Technology
• /
• v.44 no.4
• /
• pp.559-570
• /
• 2016

The EtOAc and $H_2O$ soluble fractions of Katsura tree (Cercidiphyllum japonicum Sieb. Et Zucc) bark extracts were chromatographed on a Sephadex LH-20 column with various aqueous MeOH. Gallic acid (1), methyl galate (2), kurigalin (3), 1,2,3,6-tetra-O-galloyl-${\beta}$-D-glucose (4) and 1,2,3,4,6-penta-O-galloyl-${\beta}$-D-glucose (5) were isolated from EtOAc fraction. Isocorilagin (6) and methyl galate (2) were separated from $H_2O$ fraction. The structure determination was done by $^1H$ and $^{13}C$ NMR. Of these isolated compounds, methyl galate (2), kurigalin (3) and isocorilagin (6) were isolated, for the first time, from the bark extracts of Cercidiphyllum japonicum.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.2009-2014
• /
• 2012

The general bus system architecture consists of masters, slaves, arbiter, decoder and so on in shared bus. As several masters can't use a bus concurrently, arbiter plays an role in bus arbitration. In compliance with the selection of arbitration method, The efficiency of bus usage can be determined. Fixed Priority, Round-Robin, TDMA, Lottery arbitration are studied in conventional arbitration method. In this paper, we draw the performance comparison of TDMA and Lottery bus arbitration policy developed recently due to farious conditions and propose the methods of performance improvement.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.10C
• /
• pp.983-991
• /
• 2009

While H.264/AVC is in wide use for multimedia applications such as DMB and IPTV service, we have limited usage cases for embedded real-time applications due to its high computational demand. The paper provides judicious guide line for optimization method selection, by presenting the detailed experiments data through the development process of a real time H.264 software encoder on embedded DSP. The experimental analysis includes an intensive profiling analysis, fast algorithm application, optimal memory assignment, and intrinsic-based instruction selection. We have realized a real-time software that encodes CIF resolution videos 15 fps on TMS320DM64x processors.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.116-120
• /
• 2011

In this paper, we studied the optimization of the screen pringting method for crystalline silicon solar cell fabrication. The 156 * 156 mm2 p-type silicon wafers with $200{\mu}m$ thickness and $0.5-3{\Omega}cm$ resistivity were used after texturing, doping, and passivation. Screen printing method is a common way to make the c-Si solar cell with low-cost and high-efficiency. We studied the optimized condition for screen printing with crystalline silicon solar cell as changing the printing direction (finger line or bus bar), finger width, and mesh angle. As a result, the screen printing with finger line direction showed higher finger height and better conversion efficiency, compared with one with bus bar direction. The experiments with various finger widths and mesh angles were also carried out. The characteristics of solar cells was obtained by measuring light current-voltage, optical microscope and electroluminescence.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.61-64
• /
• 2011

In order to grow the crystalline solar cells industry continuously, development of alternate low-cost manufacturing processes is required. Plasma doping system is the technique for introducing dopants into semiconductor wafers in CMOS devices. In photovoltaics, plasma doping system could be an interesting alternative to thermal furnace diffusion processes. In this paper, plasma doping system was applied for phosphorus doping in crystalline solar cells. The Plasma doping was carried out in 1~4 KV bias voltages for four minutes. For removing surface damage and formation of pn junction, annealing steps were carried out in the range of $800{\sim}900^{\circ}C$ with $O_2$ ambient using thermal furnace. The junction depth in about $0.35{\sim}0.6{\mu}m$ range have been achieved and the doping profiles were very similar to emitter by thermal diffusion. So, It could be confirmed that plasma doping technique can be used for emitter formation in crystalline solar cells.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.10 no.1
• /
• pp.139-146
• /
• 2014

Through numerous mobile device technology advances, various multimedia contents is moving towards mobile devices from existing personal computer (PC). These paradigm has emerged taking into account these idea, the so-called N-Screen, N-Screen is user-centric service to provide running and sharing on everywhere via advanced smart system in C-P-N-T (Content, Platform, Network, Terminal). Therefore we must provide securing of various contents, openended platform, and user-centric service for efficient N-Screen service. For These characteristic of N-Screen, this paper propose design and implementation of user location-based N-Screen service system. The proposed system realize user location through user's smart phone and offer automatic streaming service to user. And also, we provide web service-based extended N-Screen service. Thus, user can access various device, such as laptop, tablet, and mobile device.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.2
• /
• pp.95-101
• /
• 2016

This paper proposed a high-power density bidirectional converter for hybrid electric vehicle high-voltage DC-DC converter(HDC). The conventional HDC has two disadvantages. First, large inductance is required to satisfy the ripple current of inductor by low switching frequency (<20 kHz). Second, large core size is required to prevent the saturation of inductor by high current. Compared with the conventional HDC, the proposed HDC can reduce inductance with SiC-FET for high frequency driving. High-power density of I/O capacitors can be achieved through two-phase interleaved method. The high-power density of inductors can be achieved because the offset current of magnetizing inductance is theoretically terminated by using the differential mode coupled inductor instead of using two single inductors. The validity of the proposed converter is proved through the 50 kW prototype.

• Advances in concrete construction
• /
• v.5 no.4
• /
• pp.313-330
• /
• 2017

Geopolymer is a sustainable concrete, replaces traditional cement concrete using alternative sustainable construction materials as binders and alkaline solution as alkaline activator. This paper presents the strength characteristics of geopolymer concrete (GPC) developed with fly ash and GGBS as binders, combined Sodium silicate ($Na_2SiO_3$) and Sodium Hydroxide (NaOH) solution as alkaline activators. The parameters considered in this research work are proportions of fly ash and GGBS (70-30 and 50-50), curing conditions (Outdoor curing and oven curing at $600^{\circ}C$ for 24 hours), two grades of concrete (GPC20 and GPC50). The mechanical properties such as compressive strength, split tensile strength and flexural strength along with durability characteristics were determined. For studying the durability characteristics of geopolymer concrete 5% $H_2SO_4$ solutions was used and the specimens were immersed up to an exposure period of 56 days. The main parameters considered in this study were Acid Mass Loss Factor (AMLF), Acid Strength Loss Factor (ASLF) and products of degradation. The results conclude that GPC with sufficient strength can be developed even under Outdoor curing using fly ash and GGBS combination i.e., without the need for any heat curing.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.6
• /
• pp.133-138
• /
• 2017

Recently, CFRP composites are widely used as lightweight materials have with excellent mechanical properties and can beare widely used in various fields. In general, thermosetting resins are used for CFRP. However, in recent years, studies have been carried out using thermoplastic resins have been actively carried out to overcome the disadvantages of thermosetting resins. The LFT-D system is a molding method in which a fiber is directly cut to a the desired length while being impregnated with a thermoplastic resin to produce a compound and that is then press-molding molded to form the product. In this paper, before the production of the trailing arm, the compression molding analysis was carried out in order to grasp the problems that may occur during production. Through cCompression molding analysis was applied to calculate of the minimum press pressure and to compare and analysis analyze the molding conditions characteristic required to formfor forming the trailing arm.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.3 no.1
• /
• pp.19-24
• /
• 2008

To reduce time-to-market, more and more embedded system developers and system-on-chip designers rely on microprocessor-based design methodology. ARM processor has been a major player in this industry over the last 10 years. However, there are many restrictions on developing embedded software using ARM processor in the early design stage. For those who are not familiar with embedded software development environment or who cannot afford to have an expensive embedded hardware equipment, testing their software on a real ARM hardware platform is a challenging job. To overcome such a problem, we have designed VMA (Virtual ARM Machine), which offers easier testing and debugging environment to ARM based embedded system developers. Major benefits that can be achieved by utilizing a virtual ARM platform are (1) reducing development cost, (2) lowering the entrance barrier for embedded system novices, and (3) making it easier to test and debug embedded software designs. Unlike many other purely software-oriented ARM simulators which are independent of real hardware platforms, VMA is specifically targeted on SYS-Lab 5000 ARM hardware platform, (designed by Libertron, Inc.), which means that VMA imitates behaviors of embedded software as if the software is running on the target embedded hardware as closely as possible. This paper will describe how VMA is designed and how VMA can be used to reduce design time and cost.