• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.185-186
• /
• 2005

저온소결 Glass/Ceramic계 기판재료 조성으로 $Al_2O_3$, $SiO_2$, Cordierite, $Al_2O_3{\cdot}3SiO_2$의 4가지 filler에 zinc-borosilicate(ZBS) glass를 첨가하여 기판재료로의 사용가능성을 조사하였다. 4가지 filer에 ZBS glass를 30$\sim$50vol%첨가하여 $700\sim950^{\circ}C$에서 2시간 소결한 결과 40, 50vol%첨가 했을 때 900$^{\circ}C$에서 치밀한 소결체를 얻을 수 있었다. LSI칩 신호라인의 빠른 신호전달에 직접적인 영향을 주는 유전율은 기존의 $Al_2O_3$기관($\fallingdotseq$9.7)보다 저유전율 ($900^{\circ}C$에서 $Al_2O_3$-50vol%ZBS 5.7, $SiO_2$-50vol%ZBS 5.9, Cordierite-40vo1%ZBS 5.9, $Al_2O_3${\cdot}3SiO_2$-50vol%ZBS 4.9)을 나타내어 저온소결 기판재료로 사용이 가능함을 확인하였다.

• 한국세라믹학회지
• /
• 제49권4호
• /
• pp.295-300
• /
• 2012

SiC-based ceramic matrix composites show many advantages over their monolithic ceramic counterparts, which makes them potential candidates for applications in various fields. Depending strongly on the chemical composition and microstructure of the fiber reinforcement, matrix as well as the fiber/matrix interphase in the material, the properties of ceramic matrix composites(CMCs) are highly tailorable. In this paper, the latest progresses in the interphase design, matrix modification and fiber reinforcement decoration of CMCs are reviewed, their effects on the properties of the CMCs are introduced.

• 공업화학
• /
• 제10권3호
• /
• pp.394-399
• /
• 1999

바이오 세라믹스와 같은 의료용재료의 출발물질에 사용되는 화학시약을 대신하여 참치 뼈로부터 추출한 천연 hydroxyapatite를 이용하여 세라믹 복합체와 glass-ceramics 등을 제조하였다. 복합체의 경우 pseudowollastonite(${\alpha}-CaSiO_3$)와 $\beta$-tricalcium phosphate($\beta$-TCP)가 주 결정상으로, 그리고 glass-ceramics는 pseudowollastonite, $\beta$-TCP 및 핵형성제로 포함시킨 $CaF_2$에 의한 fluoroapatite상이 각각 관찰되었다. 복합체의 미세구조 변화 양상은 열처리 온도의 함수로 결정상의 입자 크기가 증가하는 일반적인 미세조직 구조의 형태를 나타내었고, 맛) $900^{\circ}C$로 4시간 동안 대기 상에서 제조한 glass-ceramics의 강도는 90 MPa로 나타났다.

• 한국재료학회지
• /
• 제20권3호
• /
• pp.167-173
• /
• 2010

In this study, we used activated carbon (AC) and titanium oxysulfate as a titanium precursor to prepare carbon/titania composites. We then mixed it with bentonite in different ratios to make a carbon/titania/bentonite monolith for use in architecture bricks by using Phenolic rosin (PR) as a bonding agent. The physicochemical properties of the prepared composites were analyzed by BET surface area, scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX), self-cleaning effect and bactericidal tests. The BET surface areas increased as the ratio of carbon/titania composites increased. The SEM microscopy showed that the $TiO_2$ and bentonite were coated on the surface of the AC. The XRD patterns showed a mixture structure of anatase and rutile of $TiO_2$ with a clear $SiO_2$ structure. The EDX spectra of the carbon/titania/bentonite monolith confirmed the presence of various elements, namely C, O, Ti and Si, as well as other, impure elements. Moreover, to determine the self-cleaning effect of the carbon/titania/bentonite monolith, we used methylene blue (MB, $C_{16}H_{18}N_3S{\cdot}Cl{\cdot}3H_2O$) in an aqueous solution under the irradiation of visible light. Accordingly, all of the samples had excellent degradation of the MB solution. Furthermore, it was observed that the composites with sunlight irradiation had a greater effect on E. coli than any other experimental conditions.

• 한국주조공학회지
• /
• 제11권6호
• /
• pp.475-481
• /
• 1991

In this study the fabrication technology and mechanical properties of AC8A/$Al_2O_3$ Composites by squeeze casting process were investigated to develope for application as the piston materials that require good friction, wear resistance, and thermal stability. AC8A/$Al_2O_3$ composistes without a porosity and the break of preform were fabricated at the melt temperature of $740^{\circ}C$, the preform temperature of $500^{\circ}C$, and mold temperature of $400^{\circ}C$ under the applied pressure of $1200kg/cm^2$ as the results of the observation of microstructures. As the results of this study, the tensile strength of AC8A/$Al_2O_3$ composites was not increased linearly with $Al_2O_3$ volume fraction and so it seemed not to agree with the rule of mixture, which had been used often in metal matrix composite. Also the tensile strength after thermal fatigue test was little different from that before the test. Consequently it was thought that AC8A/$Al_2O_3$ composites fabricated under our experimental conditions had a good thermal stability and subsequently a good interface bonding. Wear rate(i.e., volume loss per unit sliding distance) of AC8A/$Al_2O_3$ composites was decreased with $Al_2O_3$ volume fraction and the sliding speed at both room temperature and $250^{\circ}C$ and so there was a good correlation between wear rate and hardness. Also the wear rate of AC/8A20% $Al_2O_3$ composities was obtained the value of $1.65cm^3/cm$ at sliding speed of 1.14m/sec as compared with about $3.0\;{\times}10^{-8}cm^3/cm$ hyereutectie Al-Si alloy(Al-16%Si-2%Cu-1%Fe-1%Ni), which applied presently for piston materials. The wear behavior of $Al_2O_3$ composites was observed to a type of abrasive wear by the SEM view of wear surface.

• Composites Research
• /
• 제31권2호
• /
• pp.43-50
• /
• 2018

화학기상증착 탄화규소(CVD-SiC)의 높은 증착율과 우수한 굽힘강도 특성을 얻기 위해 증착온도에 대한 영향을 연구하였다. Hot-wall CVD 방법으로 메틸트리클로로실란(MTS : $CH_3SiCl_3$)을 이용하여 $1250{\sim}1400^{\circ}C$ 조건에서 제조된 탄화규소는 $95.7{\sim}117.2{\mu}m/hr$ 정도의 증착율을 보였다. 율속반응은 $1300^{\circ}C$ 미만에서는 표면반응, 그 이상의 온도에서는 물질전달 지배영역 특성을 나타내었다. Arrhenius plot을 통해 계산한 활성화 에너지는 각각 11.26 kcal/mole과 4.47 kcal/mole이였다. 증착온도별 표면 형상은 $1250^{\circ}C$ pebble에서 $1300^{\circ}C$ facet 구조로 변하였고, $1350^{\circ}C$ 이상에서는 multi-facet 구조를 나타내었다. 단면 형상은 $1300^{\circ}C$ 이하에서 columnar, $1350^{\circ}C$ 이상에서 isometric 구조를 보였다. 결정상은 모두 ${\beta}$-SiC로 확인되었지만 결정성장 방향은 $1250^{\circ}C$ (111)에서 $1300^{\circ}C$ 이상부터 (220) peak가 관찰되었으며, $1400^{\circ}C$에서는 (220)으로 완전히 변함을 알 수 있었다. 굽힘강도 특성은 증착온도가 증가할수록 치밀화되고, columnar에서 isometric 조직으로 변화되면서 $1350^{\circ}C$에서 최대값을 나타내었으며, $1400^{\circ}C$에서는 grain size 증가와 결정성장 방향이 최밀충진면인 (111)에서 (220)으로 완전히 변하면서 감소된 것으로 보인다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 춘계학술발표대회 논문집
• /
• pp.207-210
• /
• 2002

Metal matrix composites(MMCs) are increasingly attractive for high technology components such as aerospace applications and transportations due to their high strength, stiffness, and toughness. Many processes for fabricating MMCs have been developed, and relatively simple Foil-Fiber-Foil method is usually employed in solid state consolidation processes. During the consolidation processes at high temperature, densification occurs by the inelastic flow of the matrix materials, and the process is coupled with the conditions of pressure, temperature and volume fraction of fiber and matrix materials. This is particularly important in titanium matrix composites, and thus a generic model based on micro-mechanical approaches enabling the evolution of density over time to be predicted has been developed. The mode developed is then implemented into FEM so that practical process simulation has been carried out. Further the experimental investigation of the consolidation behavior of SiC/Ti-6Al-4V composites using vacuum hot pressing has been performed, and the results obtained are compared with the model predictions.

• 대한기계학회논문집
• /
• 제18권7호
• /
• pp.1713-1721
• /
• 1994

Intermetallic-matrix composites(IMCs) have the potential of combing matrix properties of oxidation resistance and high temperature stability with reinforcement properties of high specific strength and modulus. One of the major limiting factors for successful applications of these composite at high temperatures is the formation of interfacial reactions between matrix and ceramic reinforcement during composite process and during service. The purpose of the present investigation is to develop a better understanding of the nature of creep fracture mechanisms in a $Ni_{3}Al$ composite reinforced with both $TiB_{2}$ and SiC particulates. Emphasis is placed in the roles of the products of the reactions in determining the creep lifetime of the composite. In the present study, creep rupture specimens were tested under constant ranging from 180 to 350 MPa in vacuum at $760^{\cric}C$. The experimental data reveal that the stress exponent for power law creep for the composite is 3.5, a value close to that for unreinforced $Ni_{3}Al$. The microstructural observations reveal that most of the cavities lie on the grain boundaries of the $Ni_{3}Al$ matrix as opposed to the large $TiB_{2}/Ni_{3}Al$ interfaces, suggesting that cavities nucleate at fine carbides that lie in the $Ni_{3}Al$ grain boundaries as a result of the decomposition of the $SiC_{p}$. This observation accounts for the longer rupture times for the monolicthic $Ni_{3}Al$ as compared to those for the $Ni_{3}Al/SiC_{p}/TiB_{2} IMC$. Finally, it is suggested that creep deformation in matrix appears to dominate the rupture process for monolithic $Ni_{3}Al$, whereas growth and coalescence of cavities appears to dominate the rupture process for the composite.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.1545-1547
• /
• 2000

The mechanical and electrical properties of the hot-pressed and annealed $\beta$-Sic-$TiB_2$ electroconductive ceramic composites were investigated as function of the liquid forming additives of $Al_{2}O_{3}+Y_{2}O_3$. Phase analysis of composites by XRD revealed $\alpha$-SiC(6H), $TiB_2$, and YAG($Al_{5}Y_{3}O_{12}$). The relative density and the mechanical properties of composites were increased with increasing $Al_{2}O_{3}+Y_{2}O_3$ contents because YAG of reaction between $Al_{2}O_3$ and $Y_{2}O_3$ was increased. The Flexural strength showed the highest value of 432.5MPa for composites added with l2wt% $Al_{2}O_{3}+Y_{2}O_3$ additives at room temperature. Owing to crack deflection, crack bridging, phase transition and YAG of fracture toughness mechanism. the fracture toughness showed 7.1MPa${\cdot}m^{1/2}$. For composites added with l2wt% $Al_{2}O_{3}+Y_{2}O_3$ additives at room temperature The electrical resistivity and the resistance temperature coefficient respectively showed the lowest of 6.0${\sim}10^{-4}{\Omega}{\cdot}$ cm and 3.1${\times}10^{-3}/^{\circ}C$ for composite added with l2wt% $Al_{2}O_{3}+Y_{2}O_3$ additives at room temperature. The electrical resistivity of the composites was all positive temperature coefficient resistance(PTCR) in the temperature range of 25$^{\circ}C$ to 700$^{\circ}C$.

• 한국세라믹학회지
• /
• 제52권5호
• /
• pp.374-379
• /
• 2015

Mullite-matrix and $Al_2O_3$-matrix composites were fabricated with 30 wt% hydroxyapatite (HA) and tricalcium phosphate (TCP), respectively, as additives to give bioactivity. A diphasic gel process was employed to lower the densification temperature of the mullite matrix to $1320^{\circ}C$. A polymer complexation process was used to synthesize a TCP powder that was fully densified at $1250^{\circ}C$, for application to the matrix. For the HA/mullite composite, HA decomposed during sintering by reactions with the matrix components of $Al_2O_3$ and $SiO_2$, resulting in a mixture of $Al_2O_3$, TCP, and other minor phases with a low densification of less than 88% of the theoretical density (TD). In contrast, the TCP/$Al_2O_3$ composite was highly densified by sintering at $1350^{\circ}C$ to 96%TD with no reaction between the components. Different from the TCP monolith, the TCP/$Al_2O_3$ composite also showed a fine microstructure and intergranular fracture, both of which characteristics are advantageous for strength and fracture toughness.