• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8A
• /
• pp.650-656
• /
• 2003

In 1995, a group of representatives from the integrated circuits and computer-aided design industries presented a industry standard bipolar model called the VBIC model. The VBIC model includes the improved Early effect, quasi-saturation, substrate parasitic, avalanche multiplication, and self-heating which are not available in the conventional SGP model. This paper applies VBIC model for SiGe HBT device and develops an accurate and efficient methodology to extract all the DC and AC parameters of the VBIC model for SiGe HBT device at room temperature. Simulated results by the extracted VBIC model parameter are compared with the measurement data and show very good agreement in both DC and s-parameters prediction.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.61-67
• /
• 1996

The growth and characterization of heteroepitaxial $Si_{1-x}Ge_{x}$ films grown by the RTCVD (Rapid Thermal Chemical Vapor Deposition) method were described. For the growth of $Si_{1-x}Ge_{x}$ heteroepitaxial layers, $SiH_{4}$ / $GeH_{4}$ / $H_{2}$ gas mixtures were used. The growth conditions were varied to investigate their effects on the Si / Ge composition ratios, the interface abruptness and crystalline properties. The experimental data shows that the misfit threading dislocation in $Si_{1-x}Ge_{x}$ / Si heteroepitaxial film of about $400\;{\AA}$ thickness was not observed at the growth temperature of as low as $650^{\circ}C$, and the composition ratios of Si / Ge changed linearly with $SiH_{4}$ / $GeH_{4}$ gas mixing ratios in our experimental ranges. In the in-situ boron doping experiments, the doping abruptness would be controlled within several hundreds ${\AA}$/decade.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.9 s.339
• /
• pp.1-8
• /
• 2005

A $0.35\mu$m SiGe BiCMOS fabrication process has been timely developed, which is aiming at wireless RF ICs development and fast growing SiGe RF market. With non-selective SiGe epilayer, SiGe HBTs in this process used trapezoidal Ge base profile for the enhanced AC performance via Ge induced bandgap niuoin. The characteristics of hFE 100, $f_{T}\;45GHz,\;F_{max}\;50GHz,\;NF_{min}\;0.8dB$ have been obtained by optimizing not only SiGe base profile but also RTA condition after emitter polysilicon deposition, which enables the SiGe technology competition against the worldwide cutting edge SiGe BiCMOS technology. In addition, the process incorporates the CMOS logic, which is fully compatible with $0.35\mu$m pure logic technology. High Q passive elements are also provided for high precision analog circuit designs, and their quality factors of W(1pF) and inductor(2nH) are 80, 12.5, respectively.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.4
• /
• pp.153-157
• /
• 2011

We have investigated the effect of inductively coupled plasma (ICP) treatment on the early growth stage of heteroepitaxial Ge layers grown on Si(100) substrates using low pressure chemical vapor deposition (LPCVD), The Si(100) substrates were treated by ICP process with various source and bias powers, followed by the Ge deposition, The ICP treatment led to the enhancement in the coalescence of Ge islands, The growth rate of Ge on Si(100) with ICP surface treatment is about 5 times higher than that without ICP surface treatment. A missing dimer caused by the ICP surface treatment can act as a nucleation site for Ge adatoms, which could be responsible for the improvement in growth behavior of Ge on Si(100) substrates.

• Korean Journal of Materials Research
• /
• v.12 no.6
• /
• pp.470-475
• /
• 2002

The effects of the conditions of the collector formation on electrical characteristics of the packaged SiGe hetero-junction bipolar transistors (HBT) were investigated. While the DC characteristics of SiGe HBTs such as IV characteristic, forward current gain, Early voltage, and breakdown voltage were hardly changed after packaging, the AC characteristics such as $f_{\tau}\; and\; f_{max}$ were degraded severely. With the rise of the collector concentration, the break-down voltage decreased but the $f_{\tau}$ increased. Additionally, $\beta$ and $f_{\tau}$ values were kept high in the range of elevated collector current due to the increase of the critical current density for the onset of the Kirk effect. The devices As implanted before the collector deposition showed lower breakdown voltage and higher $f_{\tau}$ than the others, which seems to be originated from the As up-diffusion resulting in the thinner collector.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.6
• /
• pp.439-444
• /
• 2012

For the application of photo-detector as active layer, we have studied how to deposit SiGe thin film using an independent Si target and Ge target, respectively. Both targets were synthesized by purity of 99.999%. Plasma generators were generated by radio frequency (rf, 13.56 MHz) and direct current (dc) power. When Ge and Si targets were sputtered by dc and rf power, respectively, we could observe the growth of highly crystalline Ge thin film at the temperature of $400^{\circ}C$ from the result of raman spectroscopy and X-ray diffraction method. However, SiGe thin film did not deposit above method. Inversely, we changed target position like that Ge and Si targets were sputtered by rf and dc power, respectively. Although Ge crystalline growth without Si target sputtering deteriorated considerably, the growth of SiGe thin film was observed with increase of Si dc power. SiGe thin film was evaluated as microcrystalline phase which included (111) and (220) plane by X-ray diffraction method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.55-58
• /
• 2000

SiGe heterojuction bipolar transistors (HBT) have been studied and applied for advanced high speed integrated circuits. Device characteristics of SiGe HBT depending on the Ge profile of the transistor base region have been analysed using a device simulator, ATLAS/BLAZE. The models and parameters have been calibrated to the measured characteristics of the device, having a trapeziodal base profile, including the cut-off frequency of 45GHz and the dc current gain of 200. The Ge concentration which increases linearly, exponentially, or root-functionally from the emitter-base junction to the base-collector junction, has been tried to find out the influence on the device characteristics. The cut-off frequency and gain rather strongly depends on the exponential and root-functional Ge base profiles, respectively.

• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.145-152
• /
• 2007

The evolution dynamics of nanoscale Ge islands on both Si (001) and (113) surfaces is explored using ultraviolet photoelectron emission microscopy (UV-PEEM). Real-time monitoring of the in-situ growth of the Ge island structures can allow us to study the variation of the size, the shape and the density of the nanostructures. For Ge depositions greater than ${\sim}4$ monolayer (ML) with a growth rate of ${\sim}0.4\;ML/min$ at temperatures of $450-550^{\circ}C$, we observed island nucleation on both surfaces indicating the transition from strained layer to island structure. During continuous deposition the circular islands grew larger via ripening processes. AFM measurements showed that the islands grown on Si (001) were dome-shaped while the islands on Si (113) were multiple-side faceted with flat tops of (113)-orientation. In contrast, for Ge deposition with a lower growth rate of ${\sim}0.15\;ML/min$ on Si(113), we observed the shape transition from circular into elongated island structures. The elongated islands grew longer along the [$33\bar{2}$] during continuous Ge deposition. The shape evolution of the islands is discussed in terms of strain relaxation and kinetic effects.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.64-64
• /
• 1999

다결정 실리콘-게르마늄(poly-SiGe)은 태양전지 및 TFT-LCD와 같은 소자 응용에 있어서 중요하게 연구되고 있는 물질이다. 우리는 수소화된 비정질 실리콘-게르마늄 (a-Si1-xGex:H) 박막을 증착시키고 고상결정화시키며 XRD(x-ray diffraction) 및 ESR (electron spin resonance) 측정을 수행하였다. PECVD 증착가스는 SiH4과 GeH4가스를 사용하였고 Ge의 성분비는 x=0.0, 0.1, 0.5 정도로 조절되었다. 기판은 Corning 1737 glass를 사용하였고, 기판 온도는 20$0^{\circ}C$ 이었다. 증착압력과 r.f. 전력은 각각 0.6Torr와 3W이었다. 증착된 SiGe 박막은 고상결정화를 위해 $600^{\circ}C$ N2 분위기에서 가열되고, 그에 따른 XRD 및 ESR spectrum의 변화를 관찰하였다. ESR 측정은 X-band 그리고 상온에서 행해졌다. 먼저 XRD 측정으로부터 박막의 고상결정화 정도를 알 수 있었고, 고상결정화 과정이 초기 핵형성 단계와 결정화 단계, 그리고 더 이상 결정화가 일어나지 않는 완료 단계로 구분될 수 있음을 보여주었다. X값이 증가함에 따라 결정화 시간은 훨씬 단축되었다. ESR로 측정된 스핀 밀도는 a-Si1-xGex:H 박막이 처음 가열됨에 따라 전체적으로 크게 증가했다가, 결정화가 일어나면서 다시 감소하여 나중에는 거의 변화가 없었다. ESR 신호의 초기 증가는 수소 이탈에 의한 dangling bond의 증가에 기인하며, 다음 단계의 감소 및 안정 상태는 결정화에 따른 결정경계 영역의 감소와 결함들의 안정성에 기인하는 것으로 생각된다. 그러나 흥미로운 것은 Si1-xGex 합금의 경우 가열시간이 증가됨에 따라 Si-db(Si-dangling bond)와 Ge-db에 의한 신호가 서로 분리되어 나타났으며, 이 Si-db 스핀 밀도와 Ge-db 스핀밀도의 변화정도는 x값에 크게 의존함을 보여준 것이다. 즉 순수한 a-Si:H의 경우 Si-db 의 스핀밀도의 증가시간은 4시간 정도였고, 그리고 다시 감소하였으며, x=0.1 인 박막에서 Si-db와 Ge-db의 변화 시간은 순수 S-db 변화의 경우와 거의 유사하였다. 그러나 x=0.5 샘플에서는 Si-db의 변화가 빨라져서 0.1 시간 안에 증가되었고, Ge-db의 변화는 더 빠르게 수 분 동안에 증가 된후 다시 감소하였다. 이것은 수소의 Si에 대한 친화력 뿐 만아니라 Si-H과 Ge-H 결합에너지가 주위 원자들의 구성에 크게 영향받을 수 있는 가능성을 제시해준다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.227-227
• /
• 2010

기존 실리콘 박막 태양 전지는 적외선에 대한 감응도와 흡수도가 낮아서 광흡수율을 증가시킬 경우 효율의 효과적인 개선이 기대되어진다. 이를 개선하기 위해서 밴드갭이 Si에 비해 상대적으로 낮은 Ge을 도입함으로써 Si와 Ge 화합물을 형성할 경우 결정상태와 수소 함유량에 따라 밴드갭 조절이 가능하다. 또한 Ge는 Si에 비해 빛에 대한 감응도가 우수하여 광흡수율을 증가시킬수 있다. 단 SiGe 박막의 Ge 량이 일정량이상 많아질 경우 박막 내 결함 등의 생성으로 광변환 효율이 오히려 감소하므로 Ge 량의 적정화가 필요하다. 본 실험에 사용된 SiGe:H Layer는 $SiH_4$ 가스와 $GeH_4$ 가스를 혼합하여 증착하였고 증착두께는 150nm로 고정하였으며 증착장비는 PECVD를 이용하였다. 파워는 플라즈마의 방전특성을 알아본 후 최소파워를 이용하여 증착하였다. 이는 증착 시 플라즈마에 의한 박막 손상을 최소화하기 위함이다. Ellipsometry를 이용하여 박막의 두께와 optical bandgap을 측정하였다. 박막의 특성을 평가하기 위해서 STA 장비를 이용하여 dark conductivity, photo conductivity, activation energy 등을 측정하였고, MDC를 이용해 C-V 곡선을 측정하였고, 이를 terman method를 이용하여 $D_{it}$를 계산하였다.