• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.152-152
• /
• 2017

Titanium and its alloys have been widely used for biomedical applications. However, the use of the Ti-6Al-4V alloy in biomaterial is then a subject of controversy because aluminum ions and vanadium oxide have potential detrimental influence on the human body due to vanadium and aluminum. Hence, recent works showed that the synthesis of new Ti-based alloys for implant application involves more biocompatible metallic alloying element,such as, Nb, Hf, Zr and Mo. In particular, Nb and Hf are one of the most effective Ti ${\beta}$-stabilizer and reducing the elastic modulus. Plasma electrolyte oxidation (PEO) is known as excellent method in the biocompatibility of biomaterial due to quickly coating time and controlled coating condition. The anodized oxide layer and diameter modulation of Ti alloys can be obtained function of improvement of cell adhesion. Silicon (Si) and magnesium (Mg) has a beneficial effect on bone. Si in particular has been found to be essential for normal bone and cartilage growth and development. In vitro studies have shown that Mg plays very important roles in essential for normal growth and metabolism of skeletal tissue in vertebrates and can be detected as minor constituents in teeth and bone. Therefore, in this study, Si and Mg coatings on the hydroxyapatite film formed Ti-29Nb-xHf alloys by plasma electrolyte oxidation has been investigated using several experimental techniques. Ti-29Nb-xHf (x= 0, 3, 7 and 15wt%, mass fraction) alloys were prepared Ti-29Nb-xHf alloys of containing Hf up from 0 wt% to 15 wt% were melted by using a vacuum furnace. Ti-29Nb-xHf alloys were homogenized for 2 hr at $1050^{\circ}C$. The electrolyte was Si and Mg ions containing calcium acetate monohydrate + calcium glycerophosphate at room temperature. The microstructure, phase and composition of Si and Mg coated oxide surface of Ti-29Nb-xHf alloys were examined by FE-SEM, EDS, and XRD.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.8
• /
• pp.700-704
• /
• 2003

This paper describes on characteristics of 2" 3C-SiC wafer bonding using PECVD (plasma enhanced chemical vapor deposition) oxide and HF (hydrofluoride acid) for SiCOI (SiC-on-Insulator) structures and MEMS (micro-electro-mechanical system) applications. In this work, insulator layers were formed on a heteroepitaxial 3C-SiC film grown on a Si (001) wafer by thermal wet oxidation and PECVD process, successively. The pre-bonding of two polished PECVD oxide layers made the surface activation in HF and bonded under applied pressure. The bonding characteristics were evaluated by the effect of HF concentration used in the surface treatment on the roughness of the oxide and pre-bonding strength. Hydrophilic character of the oxidized 3C-SiC film surface was investigated by ATR-FTIR (attenuated total reflection Fourier transformed infrared spectroscopy). The root-mean-square suface roughness of the oxidized SiC layers was measured by AFM (atomic force microscope). The strength of the bond was measured by tensile strength meter. The bonded interface was also analyzed by IR camera and SEM (scanning electron microscope), and there are no bubbles or cavities in the bonding interface. The bonding strength initially increases with increasing HF concentration and reaches the maximum value at 2.0 ％ and then decreases. These results indicate that the 3C-SiC wafer direct bonding technique will offers significant advantages in the harsh MEMS applications.ions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.4 no.2
• /
• pp.23-28
• /
• 1993

The $(LM)Ni_{4.5}Co_{0.1}Mn_{0.2}Al_{0.2}$ hydrogen storage alloy powders were conducted 25wt% electroless copper plating in an acidic bath. For the preparation of a hydride electrodes, the copper coated alloy powder was mixed with Si-sealant(organosilicon) and compacted with $6t/cm^2$ at room temperature. The electrode characteristics were examined through electrochemical measurements in a half cell. As a sealant contents increased, the initial discharge capacity of si-sealant bounded electrode was lower and the activation rate in high current density was slower. For extended cycles, however, the electrodes with the Si-sealant were superior in a high rate discharge and useful range of temperature over the sealant-free electrode. In addition, the cycle life increased with increasing the amount of Si-sealant added. It can be suggested from the results that the Si-sealant as a binder could be applied to the preparation of the metal hydride electrode.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.5
• /
• pp.399-402
• /
• 2007

The effects of heat treatment on the electrical properties of strained-Si/SiGe-on-insulator (SGOI) devices were examined. We proposed the optimized heat treatment processes for improving the back interfacial electrical properties in SGOI-MOSFET. By applying the additional pre-RTA (rapid thermal annealing) before gate oxidation step and the post-RTA after source/drain dopant activation step, the electrical properties of strained-Si channel on $Si_{1-x}Ge_x$ layer were greatly improved, which resulting the improvement of the driving current, transconductance, and leakage current of SGOI-MOSFET.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.11a
• /
• pp.242-245
• /
• 1997

Co single layer and Co/Ti used to form a CoSi$_2$ contact. We fabricated the n+/p diodes with this CoSi$_2$ contact as diffusion source of As. The diodes wish CoSi$_2$ formed by Co/ri bilayer had more Bo7d electrical characteristics than CoSi$_2$ formed by Co single layer. This shows that the flatness of interface which is a parameters to affect the diodes\` electrical characteristics. And the electrical characteristics of diodes are more good when the second thermal activation processing temperature was low as much as 50$0^{\circ}C$ than the temperature high over than 80$0^{\circ}C$, it was thought as that the silicide was degradated at high temperature.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2032-2037
• /
• 2007

Numerical analysis was conducted to investigate the atomic layer deposition(ALD) of silicon nitride using silane and ammonia as precursors. The present study simulated the surface reactions for as-deposited $Si_3N_4$ as well as the kinetics for the reactions of $SiH_4$ and $NH_3$on the semiconductor wafer. The present numerical results showed that the ALD process is dependent on the activation constant. It was also shown that the low activation constant leads to the self-limiting reaction required for the ALD process. The inlet and wafer temperatures were 473 K and 823 K, respectively. The system pressure is 2 Torr.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1072-1075
• /
• 2004

Ion shower doping using a source gas of $PH_3/H_2$ was conducted on excimer-laser-annealed (ELA) Poly-Si. As-implanted damage is accumulated more and more with the increase of an acceleration voltage and a doping time. In this study we found that dopant-activation is relatively a rapid kinetic-process while damage-recovery is not.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2007.06a
• /
• pp.252-252
• /
• 2007

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1112-1115
• /
• 2005

In this study, we performed excimer laser activation on Phosphorus or Boron doped a-Si (amorphous silicon) film. We've got a very low sheet resistance (Rs), Rs was 60 ohm/sq. with phosphorus doping and was 65 ohm/sq. with boron doping at each optimized laser irradiation condition. We've found Rs on activated thin film showed an unprecedented behavior in both cases, because Rs had a strong dependency on the crystallinity of the activated Si film.

• Journal of Technologic Dentistry
• /
• v.14 no.1
• /
• pp.95-118
• /
• 1992

Glass ceramics for crown were prepared by adding 3$\sim$11 wt% TiO2 to the weight percent composition of 34.7 CaO, 27.8 SiO2, 18.3P2O5, 12.6MgO and 6.6 TiO2. The starting glasses were prepared by melting the powdered batch in alumina crucible at 1350$\sim$1400 for 1 hr and then quenching into a distilled water. The nucleation and crystallization of the crystalline glass ceramics for crown were studied by DTA, SME and X-ray diffraction analysis. Frit containing 9.11 wt% TiO2 had crystallization temperature of 850$\sim$1075 and major crystalline phase was identified by X-ray diffraction as diopside(CaO-MgO-2SiO2). Activation energies for the crystallization processes were obtained from DTA by varing rates for the fits, and were calculated from modified Ozawa and Kissinger equations. Activation energy for the crystallization processes of the S-4 frit was 489.6 KJ/mol.