• Title/Summary/Keyword: Si(114)

Search Result 180, Processing Time 0.034 seconds

한국에 분포하는 한약자원식물의 무기물 함량에 관한 연구 제1 보 ( The Mineral Content of Medical Wild Plant Resources in Korea ( I ) )

  • 이상래
    • Korean Journal of Plant Resources
    • /
    • v.3 no.2
    • /
    • pp.107-114
    • /
    • 1990
  • In view of the results to have measured metallic elements which is included in 45 sorts of herb medicines and surveyed their distribution, 8 kinds ofmetals including Co, Ge, Ga, TL, Cd, As, 8i, Pb, are never or little includedin almost herb medicines . Other twenty-five sorts of elements (Mo, Sc, Be, V,Ni, Sn, Se, Ba, Cr, Sb, Si, Ti, B, Li, Mg, Ca, Cr, Mn, Fe, Cu, Zn, p, Al, Na,K) are more or Less included in all herb Bedicines ana Na, Ca, p and K aremetals that are included in Large quentities in comrarison with others . Patri-uiae Radix Contains 7 kinds of metal lic elements more than other herb medicinesdoes .

  • PDF

Adhesion improvement of electroless plated Ni layer by modifying zincating process (징케이트 공정 변화에 따른 무전해 니켈 도금 막의 접착력향상)

  • 이성기;진정기;김영호
    • Proceedings of the International Microelectronics And Packaging Society Conference
    • /
    • 2002.05a
    • /
    • pp.109-114
    • /
    • 2002
  • The adhesion of electroless plated Ni layer on Al/Si substrates has been investigated. The zincating treatment was conducted with a conventional method and a modified method. In a modified method, ultrasonic agitation was applied during zincating. Adhesion strength was evaluated by a pull-off test. The ultrasonic agitation during zincating increased the nucleation density of Zn particles and refined Zn particle size. the adhesion strength of electroless Ni layer deposited on the modified zincated surface was higher than that on the conventionally zincated surface. the improvement of adhesion was attributed to the fine and dense Zn particles.

  • PDF

An aqueous extract isolated from Platycodon grandiflorum reduced acetaldehyde-induced collagen and alpha-SMA expression in hepatic stellate cells

  • Lee, Kyung-Jin;Shin, Dong-Weon;Chung, Young-Chul;Kim, Young-Sup;Ryu, Si-Yung;Roh, Sung-Hwan;Jeong, Hye-Gwang
    • Proceedings of the PSK Conference
    • /
    • 2003.10b
    • /
    • pp.113.3-114
    • /
    • 2003
  • The increased deposition of extracellular matrix by hepatic stellate cells following liver injury in a process known as activation is considered a key mechanism for increased collagen content of liver during the development of liver fibrosis. In this study, we investigated the protective effects of an aqueous extract from the roots of Platycodon grandiflorum A. DC (Campanulaceae), Changkil (CK), on hepatic fibrosis in hepatic stellate cells. We report that CK reduces the accumulation of collagen in acetaldehyde-induced hepatic stellate cells. (omitted)

  • PDF

Characteristics of Nano-Size Au Fine Particles Doped TiO2 Thin Films by Sol-Gel Method (졸-겔법에 의한 나노크기 Au 미립자 분산 TiO2 박막의 특성)

  • Park, Min-Jung;Koo, Se-Na;Lee, Kyoung-Seok;Mun, Chong-Soo
    • Journal of the Korean Ceramic Society
    • /
    • v.43 no.2 s.285
    • /
    • pp.114-120
    • /
    • 2006
  • Nano-size Au particle doped $TiO_2$ films were prepared with $Ti(OC_3H_7^i)_4$, polyvinylpyrrolidone(PVP), $HAuCl_4$ and $C_3H_7OH$ etc. by sol-gel method. $TiO_2$ gel films were obtained by the dip-coating method on the $SiO_2$ glass substrates, and then heat-treated at $700^{\circ}C$ for 10 min. The thickness of $TiO_2$ films were $0.7\~1.8\;{\mu}m$. It was found that the thickness of films prepared from PVP containing solution was about $2\~8$ times higher values than that of thin films without PVP. The size of Au particles doped in the films were about $350\~750\;nm$. Nano-size Au particle dispersed $TiO_2$ films showed high absorption peak at visible region 450nm, which made them good candidates for non-linear optical materials and photo-catalytic materials. The contact angle of $TiO_2$ film for water was $12.5^{\circ}$, and therefore it is clear that $TiO_2$ films have very high hydrophilic properties and the self-cleaning effects.

Study on the Explosion and Fire Risks of Lithium Batteries Due to High Temperature and Short Circuit Current (고온 및 단락전류에 따른 리튬배터리의 폭발 및 화재 위험성에 관한 연구)

  • Sim, Sang-Bo;Lee, Chun-Ha;Kim, Si-Kuk
    • Fire Science and Engineering
    • /
    • v.30 no.2
    • /
    • pp.114-122
    • /
    • 2016
  • This study is to analyze the explosion and fire risks due to high temperature and short circuit current of Lithium batteries. This study selected the typical types of Li-polymer batteries and Li-ion batteries as the test samples. The result of explosion risk assessment due to the high temperature showed that, while a Li-polymer battery had $170^{\circ}C$ explosion on average, a Li-ion battery had $187^{\circ}C$ explosion. The measurement result of temperature increase due to short circuit current revealed that, in case that protection circuit module (PCM) was normally working, there was little of temperature increase due to over-current limitation. However, in case that PCM was out of order, the temperature of a Li-polymer battery increased up to an average of $115.7^{\circ}C$ and the temperature of a Li-ion battery increased up to an average of $80.5^{\circ}C$, which showed the higher risks of fire and burn.

The Characteristics of Combustion for Living Leaves in Quercus variabilis with Monthly Seasonal Variations (굴참나무 생엽의 월별 연소특성에 관한 연구)

  • Park, Young-Ju;Oh, Jin-Youl;Lee, Si-Young;Lee, Hae-Pyeong
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.10 no.3
    • /
    • pp.85-90
    • /
    • 2010
  • In this study, we have examined the monthly combustion characteristics of Quercus variabilis, a representing Quercus Spp. in Korea, using its living leaves over the period of from June to October. As a result, we were able to identify that their moisture content was about 114%~155%. The leaves of Quercus variabilis collected in October showed the lowest moisture content and nonflaming ignition temperature. The leaves of July showed the fastest flaming ignition time of 27s while those from September showed the longest persistence of flame with 105s, and also showed the highest total heat release amount. There was a noticeable difference in each month of the above period regarding total heat release amount and total smoke release amount with a gradual increase from June to October. The maximum smoke density was a bit higher in October leaves but there was no significant monthly difference. In addition, July leaves were shown to reach the maximum value in the shortest time of 795s.

The Analysis of Distribution and Characteristics of Forest Fires Damage over 30 ha in Korea (우리나라 30 ha 이상 산불피해의 분포 및 특성 분석)

  • Lee, Hyung-Seok;Lee, Si-Young
    • Fire Science and Engineering
    • /
    • v.25 no.5
    • /
    • pp.39-46
    • /
    • 2011
  • In order to consider the prevention countermeasure to the occurrence of forest fires, analysing characteristic of the past forest fire data is needed. This research analyzed distribution and characteristics of forest fires damage over 30 ha based on statistics data of forest fires in Korea between 1975 and 2010. As a result, the number of forest fires damage over 30 ha as 23 was most occurred in 1978. Forest fires show an upward tendency from 1970 to 2000. Forest fires of 30 ha~50 ha damaged area was most occurred. Forest fire in Gangwon province was occurred as the number of total 66 (37.0 %). Gangwon province was superior in point density analysis. The number of forest fire occurrence over 30 ha was most high to 114 (63.0 %) in April and to 44 (24.3 %) in Sunday. The occurrence number of forest fire and damage caused by forest fire is increasing more and more since 1975, appropriate authorities can use effectively in devising policy for forest fire prevention from this result.

Studies on Whole Cell Immobilized Glucose Isomerase - II. Operational Studies on the Batchwise and Continuous Isomerization of D-Glucose - (포도당 이성화 효소의 세포 고정화에 관한 연구 - 제 2 보 : 회분식 및 연속 반응조를 사용한 포도당의 이성화 -)

  • Ahn, Byung-Yoon;Byun, Si-Myung
    • Korean Journal of Food Science and Technology
    • /
    • v.11 no.4
    • /
    • pp.249-257
    • /
    • 1979
  • Using the whole cell immobilized glucose isomerase which was prepared in the previous work (Korean J. Food Sci. & Technol., 11(3), 192 (1979), the specific activity of the immobilized enzyme was 48.1 units in the batch reaction system and 114 units in the continuous reaction system per g of matrix, respectively. In the continuous reactor the voidity was 0.36, which was suitable for the packed bed reactor. This immobilized enzyme showed a good operational stability of 115 days of half life which was sufficient for the continuous operation. The experimental result showed that 55 % of the substrate was converted to the product in the packed bed reactor. The productivity was dependent on the flow rate, column geometry, enzyme loading, and substrate concentration. An intrapaticle diffusion was observed by the effectiveness factor of 0.75 and interparticle diffusion by the decrease of Km' with increasing the superficial velocity.

  • PDF

Characteristics of Compressive Strength and Drying-shrinkage Equation of Alkali-activated Mortar (알칼리 활성화 결합재 모르타르의 압축강도 특성 및 건조수축 추정식에 관한 연구)

  • Park, Kwang-Min;Kim, Hyung-Suk;Cho, Young-Keun
    • Journal of the Korea institute for structural maintenance and inspection
    • /
    • v.21 no.2
    • /
    • pp.114-121
    • /
    • 2017
  • The purpose of this study is to understand a compressive strength and propose a dry shrinkage strain equation being able to predict dry shrinkage of alkali-activated materials(AAM) mortar samples manufactured using fly-ash(FA) and ground granulated blast furnace slag(GGBFS). The main parameters investigated were the GGBFS replace ratios(30, 50, 70 and 100%) and sodium silicate modules(Ms[$SiO_2/Na_2O$] 1.0, 1.5 and 2.0). The compressive strength of AAM increased with increases GGBFS replace ratios or Ms contents. The dry shrinkage strain of AAM decreased with increases Ms contents. But, the dry shrinkage strain of AAM increased as the GGBFS replace ratio increases. Therefore, the GGBFS replace ratio seems to have very significant and important consequences for the mix design of the AAM mortar. The results indicated the R-square of single regression analysis based on each mix properties was the highest value; 0.7539~0.9786(average 0.9359). And the presumption equation of dry shrinkage strain with all variables(GGBFS, Ms and material age) has higher accuracy and its R-square was 0.8020 at initial curing temperature 23 degrees Celsius and 0.8018 at initial curuing temperature 70 degrees Celsius.