• Transactions of Materials Processing
• /
• v.16 no.5 s.95
• /
• pp.401-405
• /
• 2007

Due to the low densities and high specific strength and stiffness, magnesium alloy sheets are very attractive lightweight materials for automotive and electrical products. However, the magnesium alloy sheets should be usually formed at elevated temperature because of their poor formability at room temperature. For the use of the magnesium alloy sheets for an industrial, their mechanical properties at elevated temperature and appropriate forming process conditions have to be developed. In this study, non-isothermal simulation of a square cup drawing of magnesium alloy sheets have been conducted to evaluate a proper forming process conditions such as the tool temperature, the tool shoulder radius, friction between the blank and the tools. According to this study, appropriate forming process conditions of square cup drawing at elevated temperature from magnesium alloy sheets are suggested.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.2053-2058
• /
• 2008

Extruded aluminium panels have been widely used for railway vehicle structures because of their light specific weight and other merit. In the past, GMAW (Gas Metal Arc Welding) and GTAW (Gas Tungsten Arc Welding) were mainly used to join aluminium panels. But recently friction stir welding (FSW) is widely used. due to its lots of advantage. In this study aluminium A6005-T6 which are used for car body structures was chosen. The influence of main parameters such as : pin rotating speed, welding speed, shoulder diameter, pin length and tilting angle on mechanical properties was examined. Optical microscope observation, micro hardness test and tensile test were carried out. Tensile strength of the stir welded plates is 74% of that of the base material.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.188-189
• /
• 2013

The purpose of this research is to comprehend experimentally the characteristic of human dynamic load and provide the result as basic data to suggest a valid impact-resistance evaluation method. Human motions exerting dynamic load are classified to 3 types. Selecting 3 ranks of motion strength, 3 ranks of load plane stiffness (A:20kN/cm, B:4.7kN/cm, C:2.2kN/cm), and 30 male grownup inspectors in their twenties, load was measured when they applied force on load plane. Result of this research is as follows: (1) Human dynamic load has different nature from object collision in the highest load ratio depending on the load plane stiffness and action time (2) The highest load ratio for each motion was 10.06 for kicking, 4.44 for hitting with shoulder, and 5.58 for fist blow.

• Journal of Korean Biological Nursing Science
• /
• v.19 no.3
• /
• pp.191-197
• /
• 2017

Purpose: The aim of this study was to determine the effectiveness of a community-based muscle and joint self-management program with muscle stretching and muscle strengthening exercises for community-dwelling older adults. Methods: The study was a pre-and-post design in a single group, which examined the effects after the intervention of muscle and joint self-management program for 6 weeks, on the 42 subjects of the elderly who registered in a Community Senior Center in J city. Data analyses were conducted with paired t-test by using a SAS (version 9.2 for Windows) program. Results: The effectiveness of muscle and joint self-management program on shoulder flexibility and right knee extension (flexibility) were significantly improved (t= 2.72, p= .010; t= -2.26, p= .029). Joint symptoms (pain, stiffness), physical functioning, depression, fatigue, and left knee extension were not significantly improved after the muscle and joint self-management program. Conclusion: The results showed the possibility of this 6-week exercise program in improving shoulder and knee flexibility for community-dwelling older adults.

• Clinics in Shoulder and Elbow
• /
• v.1 no.1
• /
• pp.83-92
• /
• 1998

Fractures of the clavicles are extremely common, accounting for 5 to 10% of all injuries in the adult skeletal trauma. Despite this, nonunions and symptomatic malunions after clavicular fracture are uncommon. When these complications occur, however, they may be associated with 11 pattern of disability that includes not only pain but also impairment of upper extremity function. The purpose of this study was to clarify the outcome of clavicular fractures treated by conservatively, and emphasize treatment and factors that possibly predispose a clavicular fracture to poor function or nonunion. We evaluated 9] consecutive fractures of the middle-third of the clavicle in adults which had been treated conservatively. There were 59 males and 33 females ranging in age from 17 to 80 years (average 36.8 years). Nine of the 91 fractures (10%) had developed nonunion, and 4 fractures (4.4%) reported unsatisfactory results. No patients had significant impairment of range of motion or strength as a result of the injury. We found that initial shortening at the fracture of≥20mm(6 cases) had a highly significantly association with nonunion(P<0.0001). Final shortening of 20mm or more (4 cases) was associated with an unsatisfactory result, but not with nonunion(P<0.0001). Our results have led us to recommend the open reduction and internal fixation of severely displaced fractures of the middle third of the clavicle in adults patients.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.71-76
• /
• 2008

The pathophysiology of rotator cuff tears and the progression of asymptomatic tears to symptomatic tears are yet unclear and much controversy. It is likely to involve a number of factors such as a genetic predisposition, extrinsic impingement from structures surrounding the cuff and intrinsic degeneration from changes within the tendon itself. Degenerative changes in the rotator cuff with aging seem to be related to the anatomic and mechanical environment of the rotator cuff. The histopathologic appearance of rotator cuff tendon rupture specimens demonstrates a consequence of degenerative changes at the site of tendon insertion into bone. It weakens the tensile strength of the tendon. Is the process of degeneration intrinsic or extrinsic in nature? I suggest that degeneration is intrinsic and not caused by extrinsic factors. Even though, rotator cuff tear may be secondary to multiple factors, I believe that primary cause of rotator cuff tears is preexisting degenerative change.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.82-89
• /
• 2008

Ideal rotator cuff repair is to maintain high fixation strength and minimize gap formation for optimizing the environment of biologic healing of tendon to bone. Among the current repair techniques, the suture bridge technique is superior to single- or double-row repair in ultimate load to failure, gap formation, restoring anatomical footprint and achieving pressurized contact area. The suture bridge technique also minimizes gap formation and has rotational and torsional resistances allowing early rehabilitation. However, despite superior biomechanical characteristics of the suture bridge technique, there is no evidence that these mechanical advantages result in better clinical outcomes. Furthermore, there is no difference in failure rates between the double-row repair and suture bridge techniques. An appropriate repair technique should be determined based on tear size and pattern and tendon quality.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.151-162
• /
• 2003

The purpose of this study was to investigate the frequency of sports injury among Korean junior elite golf players. The survey was made through the questionnaire which consist of eight categories and 280 valid answers were used to perform frequency analysis. The results indicated that 197 out of 280 participants experienced golf injuries (30%: during a game, 70%: during a practice) and 70% of them also experienced injuries within a year. The frequency analysis for the site of injury has shown that back was the most vulnerable area for all players(33%), followed by the right wrist, left shoulder and elbow for male players. Among female players, left wrist was the second weak site of injury, followed by the right wrist, right thoracic spine, and left shoulder. A few of them also have shown abnormal symptoms of ruptured lumbar disk, scoliosis, and lordosis and these injuries might be caused by the lack of flexibility and the fatigue due to over-practice. High frequency of wrist injury also demonstrated that excessive chopping or punching shot and poor environmental course conditions may cause this injury to be common. Overall, lack of warm up time, lack of strength and flexibility, and excessive amount of practice were the major reasons of injury for the junior elite golfers in Korea. The study also proved that these young Korean golfers actually had more chances to be faced with the injury than average. Thus, it is necessary to develop systematic and scientific methods of training, and prevention, treatment of these injuries with medical professionals.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.3
• /
• pp.49-60
• /
• 2018

PURPOSE: This study was conducted to investigate the intervention effect obtained by applying an ICF tool to improve the dressing in a patient with rotator cuff syndrome to schematize the problems and approaching with PNF to solve the problems. METHODS: The subject of this study was a 44-year-old patient who underwent surgery after complete right rotator cuff tear. To treat his symptoms, the processes of clinical practice were implemented in the order of examination, assessment, diagnosis, prognosis, intervention, and outcome. During examination, patient information was collected using the ICF core set. In the assessment, the problems were schematized, and an ICF assessment sheet was used to identify the interaction of the problems. The diagnosis was made by clearly describing the causal relationship derived from the assessment in ICF terms. To solve the problems, the intervention was given in the order of indirect, direct, and task based on the philosophy of PNF. To evaluate the outcome, the differences before and after the intervention were compared. Additionally, the comparison for the ICF qualifier is presented with the ICF evaluation display. RESULTS: The results of the study showed clinical advantages in shoulder strength, eccentric control, range of motion, scapular stability, and shoulder pain. Overall, our patient with rotator cuff syndrome showed improvement in dressing and undressing activity in response to the PNF strategy. CONCLUSION: Application of the PNF intervention strategy after complete rotator cuff tear would have a positive effect on patient upper extremity function.