• 제목/요약/키워드: Shoulder and elbow posture

검색결과 53건 처리시간 0.024초

장갑 착용이 악력과 안전에 미치는 영향에 관한 연구 (A Study of the Effects of Wearing Gloves on Grip Strength and Safety)

  • 정화식;구동호
    • 대한안전경영과학회지
    • /
    • 제8권4호
    • /
    • pp.13-23
    • /
    • 2006
  • Grip strength provides a quick and objective index of the functional integrity of the upper extremities. It is widely used as an assessment measure in physical and rehabilitation medicine. In this study, maximum voluntary grip strength of 20 college students wearing 5 different gloves were measured using Jamar hand dynamometer. The results show that maximum voluntary grip strength was generally reduced when wearing gloves as compared to bare-handed. More specifically, the grip strength was highest when wearing PVC coated glove or bare-handed and getting lowered as wrist band, rubber, leather, and cotton glove in these order. Depending on the measuring posture of grip strength, shoulder height with arm extended forward was higher than the elbow was flexed 90 degree. Moreover, subjects' demographic factors and hand dimensions were not closely related to the grip strength. It is thus recommended that the proper glove should be provided to reduce the negative consequences including dropping a tool, poorer control of a tool. lower quality work, and increased muscle fatigue and in turn to increase the user safety and satisfaction.

인체 계측학을 이용한 안전하고 편리한 작업 한계면에 관한 연구 (- A Study on Safe and Convenient Work-Envelop Using Anthropometric Stereotype -)

  • 임영문;방혜경;최인려
    • 대한안전경영과학회지
    • /
    • 제6권4호
    • /
    • pp.99-106
    • /
    • 2004
  • In developing criteria for establishing workstation reach limits, it is essential to select the appropriate anthropometric stereotype for solving a specific design problem. The most important factor for comfortable workstation is to eliminate trunk flexion from the neutral (upright) posture. A solution to this design can be developed using population stature and link length data. This paper provides a methodology for design of comfortable workstation using anthropometric stereotype. Application of this methodology can be utilized in various designs for work space including standing and sitting workplace. For the purpose of this study, the data are measured by some parts on body such as stature, arm length, wrist height, elbow height, and shoulder hight. The samples for this study are randomly chosen from university students in Seoul and Kangnung during sixteen months (2003.3-2004.6).

VDT 작업시간의 관련성 분석 (The relationship analysis in VDT of work hours)

  • 강점덕
    • 대한정형도수물리치료학회지
    • /
    • 제9권1호
    • /
    • pp.19-28
    • /
    • 2003
  • Objectives : This study was to investigate the relationship analysis in VDT(visual display terminal) of work hours. Methods : Questionnaires were completed by 41 women in VDT operations. The information was used to estimate multiple regression for the VDT of work hours related factors association. Results : The prevalence of the VDT of work hours was significantly higher in the shoulder which followed by the neck, the hand and fingers, the arms, the lowback, the back. The VDT of work hours decreased with aging. The VDT of work hours increased with work duration, single, lower among habitual exercise. The desk height, the seat pan height, the posture on the sitting, the elbow angle all did not meet the recommended criteria. Conclusions : Data from this study support a statistically significant association with satisfaction for occupation.

  • PDF

개인보호장비 착용이 심폐소생술에 미치는 영향: 119 구급대원을 중심으로 (Effect of wearing personal protective equipment on cardiopulmonary resuscitation: Focusing on 119 emergency medical technicians)

  • 신동민;김승용;신상도;김주현;김태한;김경용;김정희;홍은정
    • 한국응급구조학회지
    • /
    • 제19권3호
    • /
    • pp.19-32
    • /
    • 2015
  • Purpose: This study examined the effect of wearing personal protective equipment (PPE) on cardiopulmonary resuscitation (CPR), positive airway pressure, and the posture of emergency medical technicians (EMTs) when conducting CPR. Methods: Twenty 119 EMTs performed 30:2 CPR on a manikin for 4 min. Imaging data were digitized with Kwon3D XP (version 4.0). Data were collected by analyzing the motion when starting in one cycle, such as pressing to the maximum and in the final position (relaxed), and were analyzed with SPSS 18.0. Results: The angle of the elbow joints was significantly reduced (p < .05). The trunk angle was statistically significantly (p < .01, p < .001) increased. The angular velocities of the shoulder joint and left elbow joint were reduced (p > .05). The angular velocity of the trunk was significantly reduced in the starting and maximum compression postures. The hand-escape time was increased. The average compression depth was increased but not significantly (p > .05). The positive airway pressure was reduced (p > .05). Conclusion: The angle of the elbow joints and the angular velocity of the trunk were reduced, and the angle of the trunk was increased. The success of CPR and positive airway pressure was reduced.

Ergonomic Design of Medic Work Table (MWT) for Medical Technologist

  • Choi, Kyeong-Hee;Lee, Sung-Yong;Lee, Jun-Hyub;Kong, Yong-Ku
    • 대한인간공학회지
    • /
    • 제35권6호
    • /
    • pp.595-609
    • /
    • 2016
  • Objective: The purpose of this study was to develop and validate the guidelines for Medic Work Table (MWT) based on the anthropometric data of medical technologists. Background: Users' anthropometric data such as sitting height, sitting elbow height, knee height, and so on are significant factors for designing comfortable and useful furniture. Thus, many guidelines for different types of desks and chairs based on the users' anthropometric data have been suggested to many researchers. However, few researches have been conducted to provide design guidelines for MWT for blood collecting task. Medical technologists often use their upper extremities to perform blood collecting task with high repetitions. These repeated motions could be a critical factor in the prevalence rate of Work-related Musculoskeletal Disorders (WMSDs). Therefore, a study on ergonomic design of MWT would be essential in preventing the WMSDs and improving the quality of the working environment of medical technologists. Method: This study suggested design guidelines for ergonomic MWT by focusing on the heights of the upper side and underside, depths of the inside and outside, and width of MWT through anthropometric studies and literature reviews. Afterwards, a new MWT was made using the suggested design guidelines for this study. Five healthy medical technologists participated to evaluate the original MWT and new MWT. All participants took part in the range of motion (ROM) test, electromyography (EMG) muscle activity test, and usability test to validate the suggested guidelines in this study. EMG signals of related muscles (Flexor Carpi Ulnaris, Extensor Carpi Ulnaris, Deltoid Anterior, and Biceps Branchii) were recorded through the surface electromyography system from both the original MWT and the new MWT. The ROM test of the shoulder and elbow flexion was also assessed using motion sensors. Results: The newly designed MWT showed decreased ROMs of the shoulder and elbow up to 22% and 18% compared to the original MWT. The muscle activities in the new MWT also showed a decrease of 13% in Anterior Deltoid, 6% in Biceps Brachii, 5% in Flexor Carpi Ulnaris, and 8% in Extensor Carpi Ulnaris muscle groups, compared to the original MWT. In the usability test, the satisfaction score of the new MWT was also 56.1% higher than that of the original MWT. Conclusion: This study suggested guidelines for designing MWT and validating the guidelines through qualitative and quantitative analyses. The results of motion analysis, muscle activity, and usability tests demonstrated that the newly designed MWT may lead to less physical stress, less awkward posture, and better physical user interface. Application: The recommended guidelines of the MWT would be helpful information for designing an ergonomic MWT that reduces physical loads and improves the performance of many medical technologists.

유도 맞잡기 타입에 따른 허벅다리걸기의 Kinematic 분석[I] (A Kinematic Analysis of Uchi-mata(inner thigh reaping throw) by Kumi-kata types in Judo)

  • 김의환;조동희;권문석
    • 한국운동역학회지
    • /
    • 제12권1호
    • /
    • pp.63-87
    • /
    • 2002
  • The purpose of this study was to analyze the kinematic variables when Uchi-mata(inner thigh reaping throw) performing by Kumi-kata(engagement position, basic hold) types A, B(A: grasping part-behind neck lapel, B: chest lapel) in Judo with three dimensional analysis technique DLT method by videography. The subjects were four male judokas who have been training in Yong-In University(YIU), on Korean Representative level and Uchi-mata is their tokui-nage(favorite technique), the throwing form was filmed on two S-VHS 16mm video camera( 30frame/sec. Panasonic). Kinematic variables were temporal, posture, and COG. The data collection was performing by Uchi-mata. Six good trials were collected for each condition (type A, B) among over 10 trials. The mean values and the standard deviation for each variable were obtained and used as basic factors for examining characteristics of Uchi-mata by Kumi-kata types. The results of this analysis were as follows : 1) Temporal variables The total time elapsed(TE) by Uchi-mata of types A, B were 1.45, 1.56 sec. respectively. Types A shorter than B. 2) Posture variables In performing of Uchi-mata, the range of flexion in type A, left elbow was $45^{\circ}$ and B was $89^{\circ}$ from Event 2(E2) to Event 6(E6). Type A and B were quite different in right elbow angle in Event1(E1). Left shoulder angle of type A was extended and type B was flexed in E4. Both types right shoulder angles were showed similar pattern. Also both hip angles(right/left) were showed similar pattern. When type A performed Uchi-mata the knee-angle of supporting foot showed $142^{\circ}$in the 1st stage of kake phase[KP], and extended to $147^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $86^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $126^{\circ}$in the 1st stage of KP, and extended to $132^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $106^{\circ}$in the 1st stage of KP, and extended to $121^{\circ}$in the 2nd stage of KP. When type B performed Uchi-mata the knee-angle of supporting foot showed $144^{\circ}$in the 1st stage of KP, and extended to $154^{\circ}$in the 2nd stage of KP. And the foot-ankle angle of supporting foot showed $83^{\circ}$in the 1st stage of KP, and extended to $92^{\circ}$in the 2nd stage of KP. moreover, The knee angle of attacking foot showed $132^{\circ}$in the 1st stage of KP, and extended to $140^{\circ}$in the 2nd stage of KP, and the foot-ankle angle of attacking foot showed $103^{\circ}$in the 1st stage of KP, and extended to $115^{\circ}$in the 2nd stage of KP. During Uchi-mata performing, type A showed pulling pattern and type B showed lift-pulling pattern. As Kumi-kata types, it were different to upper body(elbow, shoulder angle), but mostly similar to lower body(hip, knee, ankle angle) on both types. 3) C. O. G. variables When the subjects performed Uchi-mata, COG of type A, B up and down in vertical aspect was 71cm, 73.8cm in height from the foot in the 2nd stage of KP. As Kumi-kata types, it were different on medial-lateral direction aspect but weren't different in Kuzushi phase on vertical direction aspect.

스마트폰 사용량과 근골격계질환 관련 자각증상과의 관련성에 관한 연구 (An empirical study on relationship between symptoms of musculoskeletal disorders and amount of smartphone usage)

  • 엄수현;최서연;박동현
    • 대한안전경영과학회지
    • /
    • 제15권2호
    • /
    • pp.113-120
    • /
    • 2013
  • This study was conducted to investigate the characteristics of smartphone usage and posture of users during using smartphone. A survey was conducted for 983 smartphone users to understand the association between smartphone usage and including subjective symptoms associated with musculoskeletal disorders. Main results from the survey were as follows; 1) 18.8% of the subjects experienced musculoskeletal symptoms at least at one of body parts. Specifically, 8.1%, 5.6%, 4.1%, and 11.3% of the subjects experienced musculoskeletal symptoms at neck, shoulder, elbow, and hand respectively, 2) The symptoms of musculoskeletal disorders were also associated with amount of text message and time for daily usage of smartphone. Specifically, relative risks of musculoskeletal disorders at hand/wrist/fingers in terms of "amount of text message" and "time for daily usage" for experienced user were 1.425 and 1.368 respectively to inexperienced user. This study identified 'amount of text message' and 'time for daily usage' as the major risk factors of smartphone usage in terms of musculoskeletal symptoms. The results of the study provided a good basis in order to remove or reduce the risks associated with musculoskeletal symptoms due to smartphone usage.

한국 성인 남자의 상체 동작범위 연구 - 3D 동작분석 장치를 이용하여 - (A Study on the Upper Body Range of Motion (Using a 3-D Motion Anlaysis System) about Korean Adults)

  • 박길순;유신아
    • 복식문화연구
    • /
    • 제8권4호
    • /
    • pp.587-601
    • /
    • 2000
  • The purpose of this study : 1. The total 56 range measurements of active dynamic motion of 40 subjects (20's and 30's) were measured using 3-D dynamic motion analysis system. 2. Various comparisons were performed for the right and left side, male, age groups (20's, 30's, and 40's ∼ 60's) using previous studies. The results were compared with the other studies in the aspects of age. In this study, the 3-D motion analysis system based on photogrammetry was established and used to analyze the human's motion and posture. The system consists of VICON 140, data acquisition system, and data analysis program (KRISSMAS). The result of this study were as follows : 1. Comparing 20's with 30's the result shows that 30's have larger ROM at some joints, which is inconsistent with the previous result. The reason is that female subjects in 20's were improperly sampled according to the representatives of anthropometry characteristics. 2. There are significant differences in some joints related with age. 20's male subjects have more flexible joints in the neck while 30's male subjects have more flexibility in their shoulder joint and elbow joint. But most of the significances were not high (p〈0.05). The prediction that the right side of Korean bodies would be more flexible was not a good hypothesis. And the joints flexibilities are not correlated with Rohrer's Index.

  • PDF

상지 재활을 위한 3-D 로봇 시스템의 혼합 위치/힘 제어 (Hybrid Position/Force Control of a 3-D Rehabilitation Robot System for Upper Extremities)

  • 이수한;신규현
    • 한국정밀공학회지
    • /
    • 제28권5호
    • /
    • pp.599-605
    • /
    • 2011
  • A 3-D rehabilitation robot system is developed. The robot system is for the rehabilitation of upper extremities, especially the shoulder and elbow joints, and has 3-D workspace for occupational therapy to recover physical functions in activities of daily living(ADL). The rehabilitation robot system has 1 DOF in horizontal rotational motion and 2 DOF in vertical rotational motion, where all actuators are set on the ground. Parallelogram linkage mechanisms lower the equivalent inertia of the control elements as well as control forces. Also the mechanisms have high mechanical rigidity for the end effector and the handle. In this paper, a hybrid position/force controller is used for controlling positions and forces simultaneously The controller is tuned according to the robot posture. The active motion modes for rehabilitation program consist of active-resisted motion mode and active-free motion mode. The results of the experiments show that the proposed motion modes provide the intended forces effectively.

김해시 자동차 부품 생산직 근로자의 근골격계 증상 유병률과 관련요인 (Musculoskeletal Symptoms Prevalence and Its Related Factors of Workers in Manufacturing Industry of Automobile Parts in Gimhae City)

  • 박수형;문덕환;김지혁
    • 대한정형도수물리치료학회지
    • /
    • 제19권1호
    • /
    • pp.9-20
    • /
    • 2013
  • Background: This study was conducted to provide preventive measure for the musculoskeletal disorders in automobile parts manufacturing workers. Method: The author surveyed to the musculoskeletal symptoms prevalence and its related factors from 10th to 17th April 2011 with structured self administered questionnaires. 223 out of 225 collected questionnaires were used for final analysis, excluding 2 questionnaires with no valid response. Based on the diagnostic criteria of NIOSH (National Institute for Occupational and Health), an investigation was made into the prevalence of musculoskeletal symptoms as well as into the factors related to individual items. Results: The prevalence of musculoskeletal symptoms according to the criteria of NIOSH was the highest in the shoulder (52.9%), followed by the neck (39.%), the hand/wrist (35%), the waist (29.6%), the arm/elbow (24.7%), and the leg/food (23.8%). One-way analysis showed that among general characteristics, age was the musculoskeletal risk factor with the greatest effect. Whereas among work-related characteristics, significant risk factor didn't find. Yet it was shown that among ergonomic work postures, high degree of musculoskeletal risk was shown by the posture involving frequent and repetitive movement of the arm and the hand/wrist and also by the posture involving standing for a long time. Multiple regression analysis showed that musculoskeletal risk was 1.795 times higher in those age 50 and over than in those under age 50; 1.67 times higher in the high risk stress group than in the low risk stress group; and 1.131 higher in the group involving the repetitive use of the hand/arm than in the other groups (p<.05). Conclusion: The prevalence and stress score of automobile parts manufacturing workers were higher than other occupation workers. Among general characteristics, drinking and smoking were shown to be related to stress score; while age was shown to have significant effect on musculoskeletal risk.

  • PDF