• 제목/요약/키워드: Shotcrete strength

검색결과 161건 처리시간 0.025초

배면침투를 고려한 사면안정해석 (Stability Analysis of Slope Considering Infiltration of Behind Ground)

  • 신종호;김학문;장경준;채성은
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 춘계 학술발표회
    • /
    • pp.1060-1067
    • /
    • 2009
  • Previous research on the slope failure has mainly reported that most of the slope failures occur due to surface rainfall infiltration in the rainy season. A slope of which surface is protected by shotcrete or plants, can also fail due to increase in pore water pressure from the ground water flow beneath the surface, rather than from the surface. In this study such case of slope behavior is investigated using the model test and numerical method including strength reduction method. Hydraulic boundary conditions of the slopes is considered using coupled numerical scheme. The failure mechanism of the slope is investigated and the effect of pore water pressure on slope safety is identified. Increase in pore water pressure due to lateral infiltration has significantly reduced the stability of slope.

  • PDF

터널굴착 중 발생하는 변위 및 응력의 변화양상에 대한 기초적인 연구 (A Basic Study on Change Aspect of Displacement and Stress in NATM Tunnel Excavation)

  • 정인철;박종관;이준석;이승도
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2005년도 추계학술대회 논문집
    • /
    • pp.860-865
    • /
    • 2005
  • In Korea, NATM (New Austrian Tunneling Method) has widely been used in order for constructing tunnels. The major support materials of the method are the shotcrete and rock bolt together with the arch-shaped tunnel section, which ensure the inherent strength of the rock masses. One of the most important features of the method is the feedback system between tunnel analyses and measurements, such as tunnel displacement and support stresses. This study, therefore, attempts to examine the difference in displacement and stresses between numerical results. and measurements in order for more practical design and construction of tunnels.

  • PDF

Fly Ash 및 Meta-Kaolin을 활용한 내화성 마감재의 고온특성 (High Temperature Properties of Fire Protection Materials Using Fly Ash and Meta-Kaolin)

  • 송훈;추용식;이종규;도정윤
    • 한국세라믹학회지
    • /
    • 제47권3호
    • /
    • pp.223-231
    • /
    • 2010
  • The serious issue of tall building is to ensure the fire-resistance of high strength concrete. The fire resistant finishing method is necessarily essential in order to satisfy the fire resistance time of 3 h required by the law. The fire resistant finishing method is installed by applying a fire resistant material as a method of shotcrete or a fire resistant board to high strength concrete surface. This method can reduce the temperature increase of the reinforcement embedded in high strength concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of inorganic alumino-silicate compounds including the inorganic admixture such as fly ash and meta-kaolin as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. The study results show that the fire resistant finishing material composed of fly ash and meta-kaolin has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Inorganic compounds composed of fly ash and meta-kaolin is evaluated to be very effective as the fire resistance material for finishing to protect the concrete substrate by the reason of those simplicity in both application and manufacture. The additional study about the adhesion in the interface with concrete substrate is necessary for the purpose of the practical application.

록볼트의 타설 직후의 강도발현 과정 및 효과에 관한 연구 (Study on rock reinforcement process and the effect of produced strength right after rockbolt installation)

  • 이토 준;박해균;김동완;김재권
    • 한국터널지하공간학회 논문집
    • /
    • 제5권2호
    • /
    • pp.189-198
    • /
    • 2003
  • 터널의 대단면화에 따라 각 암반 지보의 역할과 그 보강효과를 확인하고 보다 합리적인 지보구조로의 변화가 요구되고 있다. 특히, 굴착직후 숏크리트에 의한 지보효과가 효과적이지 못한 터널에서는 지보 매커니즘에 대한 추가적인 검토가 필요하다. 강도가 발생하지 않는 터널이 가장 불안한 상태에 있을 때의 지보구조는 충분한 검토가 필요하다. 본 논문에서는 약재령 (若材令)시 록볼트에 의한 보강효과를 볼트 그라우트재의 경화를 고려하여 모의암반에 의한 실험 및 수치해석을 실시하여 시간의존에 따른 그라우트재의 압축강도와 재령, 부착강도와 재령, 부착강성과 재령과의 관계를 명확하게 하는 것으로 굴착직후의 록볼트의 암반보강 효과를 검토하고, 약재령시 록볼트의 모델화 및 물리정수를 산정하였다. 또 그라우트재의 효과를 가지지 않고도 해결되는 수압팽창형 프리쿠션볼트에 의한 굴착직후의 암반보강효과에 대해서도 검토하였다.

  • PDF

산업부산물(플라이애시)과 실리카퓸을 재활용한 숏크리트의 환경유해성 평가 (Environmental Assessment of Shotcrete Using Recycled Industrial By-Products (Fly Ash) and Silica Fume)

  • 박철우;심종성;강태성;박성은
    • 대한토목학회논문집
    • /
    • 제30권3C호
    • /
    • pp.159-165
    • /
    • 2010
  • 최근 산업발전에 따른 천연자원 고갈, 공해물질 배출, 폐기물 발생 등과 같은 부가적인 문제는 세계적으로 이슈화되고 있다. 현재 국내 산업부산물은 연간 600만 톤이 발생하며, 매립, 소각, 저장과 같은 1차원적인 처리에도 한계가 발생하고 있는 실정이다. 본 연구에서는 산업폐기물인 플라이애시 재활용 연구의 일환으로 플라이애시와 실리카퓸을 숏크리트에 활용하여 자원의 재활용 문제뿐만 아니라 숏크리트에 적용함으로써 플라이애시의 사용을 확대하고자 한다. 그러나 숏크리트에 적용하기에 앞서 최근 범지구적으로 이슈화되고 있는 환경문제에 보다 적극적으로 대처하기 위하여 환경유해성 평가가 반드시 필요하며, 본 연구에서는 예비 배합 및 압축강도 시험을 통해 도출한 10가지 배합에 대하여 화학성분 분석시험과 중금속 용출시험을 통해 환경 영향평가를 실시하였다. 압축강도 시험결과, 모든 배합에서 국내외 기준을 만족하는 것으로 나타났으며, 중금속 용출시험의 경우 Cr, Cd, Hg 성분은 검출되지 않고 Pb 성분은 플라이애시가 함유된 일부분의 경우에서만 검출되었다. 그리고 Cu, As 성분이 모든 배합에서 검출되었으나 국내외 기준에 모두 만족하는 결과를 얻을 수 있었다.

TBM 터널 세그먼트용 강섬유보강 콘크리트의 인장특성 평가 (Evaluation of tensile properties of SFRC for TBM tunnel segment)

  • 문도영;장수호;배규진;이규필
    • 한국터널지하공간학회 논문집
    • /
    • 제14권3호
    • /
    • pp.247-260
    • /
    • 2012
  • TBM 터널 세그먼트의 철근량을 감소시키기 위한 연구로서, 강섬유 보강콘크리트의 사용이 시도되고 있다. 이와 같은 터널 세그먼트에는 철근의 감소로 인해 필요한 인장성능의 확보를 위하여 숏크리트에 사용되는 강섬유에 비해 매우 높은 형상비의 강섬유를 활용하는 것이 필요하다. 본 연구에서는 강섬유의 형상비가 80인 강섬유 콘크리트의 인장특성을 휨시험과 Double Punch Test를 통해 평가하였다. 휨시험결과, 사용된 강섬유의 충분한 부착강도로 인해 30%~150%의 강도 증진을 나타냈으며, 오영훈(2008)의 예측식을 통한 휨인장강도예측이 가능한 것으로 판단된다. 이 실험을 근거로 설계에 필요한 직접인장강도를 ACI와 RILEM의 식에 의해 평가한 결과, 적용기준에 따라 큰 차이가 있는 것으로 나타났다. 또한, DPT 실험을 통해 RILEM에서 권고하고 있는 직접인장강도의 정밀도 있는 예측이 가능한 것으로 판단된다.

운영중인 철도비탈면 보호를 위한 초속경 복합매트의 강도 및 내구성 실험 (Strength and Durability Test of Rapid Hardening Composite Mat for Protect Railway Slope in Operation)

  • 유현상;강태희;정혁상;백인철
    • 한국지반신소재학회논문집
    • /
    • 제21권4호
    • /
    • pp.79-91
    • /
    • 2022
  • 최근 폭우, 폭설 등과 같은 이상기후로 인해 도로, 철도 및 단지에 적용된 비탈면의 국부적 파괴 또는 손상 빈도가 점차 증가하고 있다. 초속경 복합매트(Rapid Hardening Composite Mat, RHCM)은 대규모 토공이 불필요하고 수해복구시간을 최소화할 수 있는 장점이 있어 대안으로 고려될 수 있다. RHCM은 대표적인 비탈면 보호공법인 숏크리트 공법 및 식생공 공법에 비해 중장비 설비가 불필요하고 유지관리가 용이하며, 기존 Geosynthetic Concrete Composite Mat(GCCM)에 비해 경화시간이 짧아 긴급복구가 가능하다는 장점이 있다. 따라서, 본 연구에서는 실내시험을 통해 RHCM의 강도 및 내구성을 측정하고 GCCM과 비교·분석하였다. 실내시험 결과 RHCM의 강도는 기존 GCCM에 비해 약 51% 높은 것으로 나타났으며, 내구성 또한 69% 높은 것으로 나타났다.

구조해석과 현장계측에 의한 고강도 격자지보재의 성능 평가 (Performance Evaluation of High Strength Lattice Girder by Structural Analyses and Field Measurements)

  • 이재원;민경남;정지욱;노병국;이상진;안태봉;강성승
    • 지질공학
    • /
    • 제30권3호
    • /
    • pp.237-251
    • /
    • 2020
  • 본연구는 H형강 대체 지보재로 개발된 고강도 격자지보재의 성능을 평가하기 위하여 터널에서의 지보재에 대한 구조해석과 계측에 의한 터널 변위와 지중응력 변화를 살펴보았다. 터널 지보재 3차원 비선형 구조해석 결과에 의하면, H형강과 고강도 격자지보재의 하중과 변위 관계는 거의 동일한 거동을 보였으며, 고강도 격자지보재의 최대하중은 H형강보다 1.0~1.2배 크게 나타났다. 터널 지보재 3차원 터널단면해석 결과에 의하면, 축력은 터널 좌측 및 우측 하단부에서 크게 발생했으며 현장시험 계측값과 유사한 경향을 나타냈다. 천단침하 및 내공변위 계측결과에 의하면, 터널 내 강지보(H형강)와 고강도 격자지보 구간의 최종변위량은 1차 관리기준인 23.5 mm 이내의 큰 차이 없이 일정한 값으로 수렴되었다. 지중변위 계측 결과에 의하면, 두 지보재 구간의 최종변화량은 미소한 변위 변화를 보였으나, 1차 관리기준인 10 mm 이내의 일정한 값으로 수렴되었다. 숏크리트 및 강지보 응력 계측 결과에 의하면, 두 지보재 구간의 최종변화량은 미소한 응력 변화를 보였으나, 1차 관리기준인 81.1 kg/㎠과 54.2 tonf 이내의 일정한 값으로 수렴되었다. 결과적으로 강지보재와 고강도 격자지보재가 설치된 터널구간에서 계측 결과는 매우 미미한 차이를 나타냈으며, 이것은 H형강 대신 고강도 격자지보재를 터널에 적용하더라도 구조적으로 충분히 안정성을 확보할 수 있음을 의미한다.

조립식 쏘일네일링 공법의 개발과 시험시공사례에 관한 연구 (A Study on the Development of Assembling Soil Nailing Method and Its Applications)

  • 권영호;박신영;류정수;강인규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 춘계 학술발표회 논문집
    • /
    • pp.113-120
    • /
    • 2005
  • Soil nailing system can be mentioned to a method of supporting as the shear strength of in-situ soils is increased by passive inclusions. In the general soil nailing system, facing walls are used in two kind of a lattice concrete block or a cast in placed concrete wall. A case of lattice concrete blocks is used in slow slopes greater than 1:0.7. Also, a case of a cast in placed concrete wall is used in steep slopes less than 1:0.5. The cast in placed concrete walls are constructed to 30cm thick together with a shotcrete facing. In this study, the assembling soil nailing method as a new soil nailing system is proposed. This method is constructed assembly using precast concrete panels. Therefore ability of the construction and quality of the facings can be modified than a usual soil nailing system. Also, this method can be obtained the effects that a global slope stability increase, as precast concrete panels is put on cutting face after excavating a slope.

  • PDF

다발형 폴리아미드섬유 보강 콘크리트의 휨거동에 관한 실험적 연구 (A Experimental Study on the Flexural Behavior of Bundle Type Polyamide Fiber Reinforced Concrete)

  • Jeon, Chan Ki;Jeon, Joong Kyu
    • 한국재난정보학회 논문집
    • /
    • 제10권1호
    • /
    • pp.61-70
    • /
    • 2014
  • 일반적으로 건설재료 용도로 많이 사용되고 있는 유기섬유 보강 콘크리트는 섬유 자체의 인장강도 및 탄성계수는 낮지만, 휨거동, 균열에 대한 저항성 및 충격저항성 등의 특성은 우수하며, 내화학성이 뛰어나고 부식의 우려가 없는 것으로 널리 알려져 있다. 최근 해외에서는 유기섬유 보강재를 터널 숏크리트와 프리캐스트 세그먼트 라이닝, 교량 슬래브 및 PC제품 분야에서 일부 활용되고 있으며, 그 종류 또한 다양하다. 본 연구에서는 다발형 폴리아미드섬유를 혼입한 콘크리트의 휨거동 특성을 ASTM C 1609 및 KS F 2566에 준하여 하중-처짐 관계를 도출하여 유기섬유 보강 콘크리트의 적용 가능성을 검토하였다.