• 제목/요약/키워드: Shortening generation

검색결과 53건 처리시간 0.021초

제지폐수 벌킹제어를 위한 미생물 적용 연구 (Studies on the Application of Microorganism to Control the Bulking of Paper Mill Wastewater)

  • 이성호;조준형
    • 펄프종이기술
    • /
    • 제34권3호
    • /
    • pp.32-37
    • /
    • 2002
  • The paper mill wastewater actually generating bulking was used to apply to the spot. Batch and continuous type pilots were used in this study. Optimal time after propagating generation of activated sludge in aeration basin by adding Hoc forming microorganism was 24 and 36hours while optimal time of activated sludge in original aeration basin was 60hours. Showing the difference of sedimentation velocity at 7th day after operating a pilot continuously, SV30 was decreased to 50% at 13th day. COD value in aeration basin with floe forming microorganism was 35mg/L while COD value in original aeration basin was 52mg/L. It was indicated that application of Hoc forming microorganism can control the bulking of paper mill wastewater by shortening of recovery time and improving of pollution removal efficiency.

웹 기반 컴퓨터 지원 발상시스템을 이용한 게임 시나리오 개발에 관한 연구 -게임 제작 프로세스 초기 시나리오 개발에 대한 발상 시스템 적용과 효과를 중심으로- (Study of Game Development scenario using Web Based Thinking System -Focused on applying The conceptual system and its effects during the first step of game development process-)

  • 정승호;황영섭;한경돈
    • 한국컴퓨터정보학회논문지
    • /
    • 제10권3호
    • /
    • pp.65-73
    • /
    • 2005
  • 게임 개발의 성패는 창의적인가 아닌가에서 결정된다. 게임 개발 프로세스의 초기 단계인 시나리오 작성부분에서 특히 창의적인 아이디어 발상이 필요하다. 이를 위해 선행 개발된 웹 기반 창의적 발상 시스템(Creative Group Thinking System:이하 CGTS)을 게임 개발 디자인에 적용하여 활용하고자 한다. 따라서 본 연구는 게임 시나리오 작성 부분의 아이디어 발상 작업을 프로그램화하여 창의성을 높이고 작업시간을 단축하고자 한다.

  • PDF

Validating the Structural Behavior and Response of Burj Khalifa: Synopsis of the Full Scale Structural Health Monitoring Programs

  • Abdelrazaq, Ahmad
    • 국제초고층학회논문집
    • /
    • 제1권1호
    • /
    • pp.37-51
    • /
    • 2012
  • New generation of tall and complex buildings systems are now introduced that are reflective of the latest development in materials, design, sustainability, construction, and IT technologies. While the complexity in design is being overcome by the availability and advances in structural analysis tools and readily advanced software, the design of these buildings are still reliant on minimum code requirements that yet to be validated in full scale. The involvement of the author in the design and construction planning of Burj Khalifa since its inception until its completion prompted the author to conceptually develop an extensive survey and real-time structural health monitoring program to validate all the fundamental assumptions mad for the design and construction planning of the tower. The Burj Khalifa Project is the tallest structure ever built by man; the tower is 828 meters tall and comprises of 162 floors above grade and 3 basement levels. Early integration of aerodynamic shaping and wind engineering played a major role in the architectural massing and design of this multi-use tower, where mitigating and taming the dynamic wind effects was one of the most important design criteria established at the onset of the project design. Understanding the structural and foundation system behaviors of the tower are the key fundamental drivers for the development and execution of a state-of-the-art survey and structural health monitoring (SHM) programs. Therefore, the focus of this paper is to discuss the execution of the survey and real-time structural health monitoring programs to confirm the structural behavioral response of the tower during construction stage and during its service life; the monitoring programs included 1) monitoring the tower's foundation system, 2) monitoring the foundation settlement, 3) measuring the strains of the tower vertical elements, 4) measuring the wall and column vertical shortening due to elastic, shrinkage and creep effects, 5) measuring the lateral displacement of the tower under its own gravity loads (including asymmetrical effects) resulting from immediate elastic and long term creep effects, 6) measuring the building lateral movements and dynamic characteristic in real time during construction, 7) measuring the building displacements, accelerations, dynamic characteristics, and structural behavior in real time under building permanent conditions, 8) and monitoring the Pinnacle dynamic behavior and fatigue characteristics. This extensive SHM program has resulted in extensive insight into the structural response of the tower, allowed control the construction process, allowed for the evaluation of the structural response in effective and immediate manner and it allowed for immediate correlation between the measured and the predicted behavior. The survey and SHM programs developed for Burj Khalifa will with no doubt pioneer the use of new survey techniques and the execution of new SHM program concepts as part of the fundamental design of building structures. Moreover, this survey and SHM programs will be benchmarked as a model for the development of future generation of SHM programs for all critical and essential facilities, however, but with much improved devices and technologies, which are now being considered by the author for another tall and complex building development, that is presently under construction.

유채 성분육종 효율을 증진키 위한 세대단축 기술개발에 관한 연구 제4보 Winter형 유채의 유묘기 록체 저온감응이 하계고온 포장재배에 미치는 효과 (Studies on Rapid Advancement of Generations for a Breeding Efficiency Promotion of Rape Oil Improvement IV. Effect of Green Plant Vernalization on Shortening the Growing Period of Summer Cultured Rape in Field)

  • 이정일;권병선;김원출
    • 한국작물학회지
    • /
    • 제28권1호
    • /
    • pp.133-138
    • /
    • 1983
  • 유채에 있어서 유묘의 저온감응 처리가 하계고온포장에서의 좌지 방지에 미치는 효과를 조사하여 유채 세대단축 기술의 보완과 우량종자의 비격리 순수채종 방안을 검토코자 시험을 실시하였던 바 그 결과를 요약하면 다음과 같다. 1. 유채 유묘의 저온록체 춘화처리후 하계고온의 일반포장조건에서 재배했을 때 추태, 개화단축 효과는 조생, 중생종에서 추태까지 34일, 개화까지 52일 소요했으며 만생종은 추태까지 44일, 개화까지는 73일을 소요했다. 2. 성숙까지의 전생육기간에서는 조생, 중생종들이 85-88일이 필요했으며 만생종에서는 108일이 소요되어 표준재배 227-240일 보다는 67%-55% 단축할 수 있었다. 3. Winter형의 B.napus에서 5월 이후의 고온재배에서는 전부 좌지하던 것이 국내품종도 록체춘화저온처리에서는 모든 공시품종이 완전 추태ㆍ개화, 성숙할 수 있었다. 4. 저온록체 처리후 하계고온재배시의 유채 주요형질들은 초장, 수장에 있어서 보통기재배보다 50% 내외로 빈약하였으며 수량형질인 분지수와 1수협수에서는 특히 적어서 보통재배시의 1/10 정도로 분지수 2-3개, 협수 4-7협에 불과했다. 5. 그러나 결실립수, 결실비율, 1,000립중 등에서는 다소 표준추파재배보다 떨어지나 큰 차이는 없었다. 6. 저온처리 하계고온 재배시의 주당종실중과 10a당 수량성에서는 1주당 8.8g으로 표준재배의 34.5g의 26%밖에 되지 않으며 10a당 수량성은 평균 53kg로 표준추파재배의 230kg에 비해 23%에 불과하였다. 7. 수량성이 10a당 불과 53kg 내외이긴하나 이같은 채종량은 육묘이식으로 100㏊ 이상의 (1,000배 증식율) 배경면적에 보급 증식할 수 있을 뿐만 아니라 혼매원이 없는 하계재배로 강실, 격리재배를 하지 않고도 순정한 채종이 가능하게 되었다.

  • PDF

유전자 알고리즘의 수렴 속도 향상을 통한 효과적인 로봇 길 찾기 알고리즘 (Effective Robot Path Planning Method based on Fast Convergence Genetic Algorithm)

  • 서민관;이재성;김대원
    • 한국컴퓨터정보학회논문지
    • /
    • 제20권4호
    • /
    • pp.25-32
    • /
    • 2015
  • 유전자 알고리즘은 초기 해 집합을 대상으로 해 집합의 평가와 유전자 연산자의 적용, 자연 선택 등의 과정을 반복하여 최적 해를 찾는 탐색 알고리즘이다. 유전자 알고리즘을 설계할 때 사용한 선택 전략, 세대교체 방법, 유전자 연산자 등은 유전자 알고리즘의 탐색 효율성에 영향을 준다. 본 논문에서는 시간 제약이 있는 상황에서의 로봇 경로 탐색을 위해 기존의 유전자 알고리즘보다 빠르게 수렴하는 유전자 알고리즘을 제안한다. 로봇 경로 탐색 시 긴급한 상황에서 유전자 알고리즘은 연산을 위한 충분한 시간을 확보하지 못 하게 되고, 이는 최종적으로 찾아낸 경로의 질을 떨어뜨린다. 제안하는 알고리즘은 빠른 수렴을 위한 선택 전략, 세대교체 방법을 사용하였으며, 유전자 연산자로는 전통적인 교차, 돌연변이 외에 경로의 길이를 줄이기 위한 단축 연산자를 추가로 사용하였다. 이를 통해 제안하는 알고리즘은 적은 세대 수에도 빠르게 짧은 경로를 찾아낸다.

공구내부냉각에 의한 고장력합금강의 피삭성에 관한 연구 (A Study on the Machinability of High Strength Steel with Internally Cooled Cutting Tool)

  • 김정두
    • Tribology and Lubricants
    • /
    • 제5권1호
    • /
    • pp.44-50
    • /
    • 1989
  • High strength steel is similar to carbon steel in its composition. This material is developed originally for special uses such as aerospace and automobile due to its high strength and shock-free property in spite of lightness. But the chemical attraction of high strength steel is serious, which includes comminution of formation, metalization and strengthening. Machining results in built-up edge between this material and the tool. Especially the work hardening behavior results in tool life shortening, which was caused by temperature generation during machining. In this study, cooling system was made in which liquid nitrogen is supplied to circulate in order to make up for these weaknesses. Machining of high strength steels, which is recognized as difficult to machine materials, was conducted after tool is cooled at -195$\circ$C. Experimental results showed that the tool was cooled down rapidly below -195$\circ$C in about 200 seconds. The tool temperature of machining with cooling system was lowered by 60~95$\circ$C than that of machining in room temperature. The hardness of the surface of chip is decreased by machining with cooling system. And the machining using the cooling system made it possible to increase shear angle, to retain smooth surface on chip without built-up-edge and to get a better roughness.

다수 BESS의 SOC Balancing을 고려한 퍼지 드룹 제어 (Fuzzy Droop Control considering SOC Balancing of BESSs)

  • 한성근;유형준;김학만
    • 전기학회논문지
    • /
    • 제64권4호
    • /
    • pp.616-622
    • /
    • 2015
  • A microgrid which is composed of distributed generation systems, energy storage systems and loads is operated in the grid-connected mode and in the islanded mode. Especially, in the islanded mode, a microgrid should maintain frequency in the allowed range. The frequency is decided by a balance between power supply and power demand. In general, the frequency is controlled by using battery energy storage systems (BESSs) in the microgrid. Especially, droop control is applied to controlling BESSs in the microgrid. Meanwhile, over-charging and deep-discharging of BESS in operation and control cause life-shortening of batteries. In this paper, a fuzzy droop control is proposed to change droop gains adaptively by considering state of charge (SOC) of BESSs to improve the life cycle of the battery. The proposed fuzzy droop control adjusts droop gains based on SOC of BESSs in real time. In other to show the performance of the proposed fuzzy droop control, simulation based on Matlab/Simulink is performed. In addition, comparison of the convention droop control and the proposed fuzzy droop control is also performed.

Defect of SIRT1-FoxO3a axis is associated with the production of reactive oxygen species during protein kinase CK2 downregulation-mediated cellular senescence and nematode aging

  • Ham, Hye-Jun;Park, Jeong-Woo;Bae, Young-Seuk
    • BMB Reports
    • /
    • 제52권4호
    • /
    • pp.265-270
    • /
    • 2019
  • We investigated whether SIRT1 is associated with reactive oxygen species (ROS) accumulation during CK2 downregulation-mediated senescence. SIRT1 overexpression suppressed ROS accumulation, reduced transcription of FoxO3a target genes, and nuclear export and acetylation of FoxO3a, which were induced by CK2 downregulation in HCT116 and MCF-7 cells. Conversely, overexpression of a dominant-negative mutant SIRT1 (H363Y) counteracted decreased ROS levels, increased transcriptional activity of FoxO3a, and increased nuclear import and decreased acetylation of FoxO3a, which were induced by CK2 upregulation. CK2 downregulation destabilized SIRT1 protein via an ubiquitin-proteasome pathway in human cells, whereas CK2 overexpression reduced ubiquitination of SIRT1. Finally, the SIRT1 activator resveratrol attenuated the accumulation of ROS and lipofuscin as well as lifespan shortening, and reduced expression of the DAF-16 target gene sod-3, which were induced by CK2 downregulation in nematodes. Altogether, this study demonstrates that inactivation of the SIRT1-FoxO3a axis, at least in part, is involved in ROS generation during CK2 downregulation-mediated cellular senescence and nematode aging.

여뀌과 이형경식물의 Dinorphism과 Bisexuality의 변화 (STUDIES ON THE DIMORPHISM AND TRANSITION OF BISEXUALITY OF HETEROSTYLOUS POLYGONACEAE)

  • Harn, Chang-Yawl
    • Journal of Plant Biology
    • /
    • 제3권2호
    • /
    • pp.6-18
    • /
    • 1960
  • The present experiments were designed in order to clarify the differences between the long and short styled plants and the transgressive gradition in the degree of dimorphism among the three heterostylous species of the Polygonus, P. japonica, F. esculentum, and P. senticosa, based on investigations regarding the floral structure, ecological and physiological traits, the results of which are summarized as follows: (1) P. japonica, although it exhibits typical dimorphism, has undergone so high a differentiation between long and short styled that its long styled individuals behave as if they were female; and short styled individuals as if male. In long-styled individuals, filament, anther, and pollen grains show signs of degeneration, most of the pollen being abortive. On the other hand, in short styled individuals, the filament, anther, and pollen grains have attained remarkable development; the pollen grians are large and fertile. In short-plant the fertilized flowers readily drop off in every stage of their embryo development. This species has completely lost the self-fertile property, which is characteristic of the non-dimorphic Polygonum genus. Although this specsei typically exhibits the physiological characteristics of the non-dimorphic Polygonum genus. Although this specisei typically exhibits the physiological characteristics of dimorphism in controlled pollination, the short-styled individuals bear no seed in nature, thus misleading taxonomists to idenfity the short-styled plant as male. 2) The morphological feature of the flower organ of P. senticosa obviously indicates definite dimorphism. Physiologically, however, no differentiation towards dimorphism was observed, the species still retaining, both in long and short-individuals, the self-fertile property common to the Polygonum genus. Elaborate examinations revealed that regardless of the modes of pollination, both fertiization and seed setting flourish, no differentiation betwen legitimate and illegitimate unions being recognizable. This sort of physiological property has not been observed in the investigations of other heterostylous plants. It is assumed that this species is differentiated structurally into dimorphism, but not yet physiologically. In nature, however, this plant would have more opportunities to be cross-pollinated, i.e., legitimately combined, than self-pollinated because of the development of two forms of flowers. 3) In terms of heterostylism, the F. esculentum just occupies the intermediate position between P. japonica and P. senticosa structurally, ecologically, and physiologically. Doescription of some of the physiological behavior of the plant will suffice to demonstrate the above facts. While P. japonica has completely lost its self-fertile property, P. senticosa still retains it wolly. In F. esculentum 2-6% of self-fertility is the result in illegitimate combination. There occur occasionally hereditary self fertile individuals among some of the F. or 20 min. irradiation plot, when they reach any stage of the same bacterial population. In addition to this increase of total population in the plots with the more dose of UV light irradiation, it seems that the more dose of UV light irradiation is the more shortened the generation time of Azotobacter. Therefore, it is clear that variation of reproductive rate must be, mere or less, due to the genetic effects induced by UV light irradiation. On the other hand, the lag phase or logarithmic growth phase in nonirradiated culture is shortened prominently, and this must be due to the difference in bacterial number of the original inoculm. The generation time of Azotobacter is shortened by exogeneous treatment of nuclei acid derivatives, and the degree is greater in case of DNA derivatives than RNA dervatives. W.H. Price reported that the rate of ribose nucleic acid to protein in Staphylococcus muscae is proportional to the generation time: that is the faster the cell can form ribose nucleic acid, the more rapid its growth. This explains the shortening of generation time by exogeneous RNA derivatives in this work reasonably. On the other hand, it is well known that the desoxyribose nuclic acid content per cell is constant and independent of the generation time. A.D. Laren and W.N. Takahashi reported that the infectious RNA from TMV is 6 times as sensitive to inactivation by UV as it is in the form of intact virus, and that inactivation of infectious TMV involves onlu a local change on RNA chain. But, the effect of exogeneous DNA in this work suggests that irradiated living cell which cotain DNA bring about some change on DNA moleculs as well as RNA molecules. And if the mutagenic effects of UV take into consideration, it is very reasonable. Therefore, it is clear that the variation of the generation time by UV irradiation is, more or less, due to the genetic effects. Therefore, it seems that the shortness of the average lifewpan of Azotobacter by UV irradiation is resulted not only from the influence of the environmental conditions, but also from the variation of genetic factor of the individual.

  • PDF

성능 저하 식별을 통한 저전력 개선용 코드 가시화 방법 (Code Visualization Approach for Low level Power Improvement via Identifying Performance Dissipation)

  • 안현식;박보경;김영철;김기두
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제9권10호
    • /
    • pp.213-220
    • /
    • 2020
  • 높은 사양이 필요한 하드웨어 기반의 모바일 및 IoT 임베디드 시스템은 저전력과 성능에 중요한 이슈를 갖고 있다. 이는 전력 소비로 발열량 증가 및 기기의 수명 단축 문제가 발생된다. 이러한 환경에서 소프트웨어도 제한된 전력, 메모리 등에서 안정적인 동작을 수행해야하므로 디바이스의 소비전력이 증가한다. 이를 해결하고자, 코드 관점에서 성능을 저하시키는 모듈을 식별하고, 그 모듈의 전력 최소화를 통한 성능 개선 가시화 방법을 제안한다. 이는 코드 가시화를 통해 복잡한 모듈(특히 Cyclomatic complexity, Coupling & Cohesion)을 식별하고, 저전력 코드 패턴화와 성능 코드를 간결화 한다. 이런 코드로 소비전력을 감소 및 성능 개선 함으로써 코드의 품질을 최적화 할 수 있다.