• 한국임상수의학회지
• /
• 제14권2호
• /
• pp.223-229
• /
• 1997

This study was carried out to determine the effect of uterus shortening on the pvaries, the length of uterine horn and the recovery of embryos. The length of the shortened uterine horns increased more in part of uterine tip from connecting part for shortening than in base (P<0.05), and collection of embryos was also difficult in gilts because of its narrow pelvis. The embryos collected surgically from gilts with shortened uterine horns were developed into 2~8cells (87.5%) 3days and 4cell~morula (88.9%) 5days after mating.

• 대한약침학회지
• /
• 제6권2호
• /
• pp.159-164
• /
• 2003

Results : 1. The most important concept of IMS is chronic pain illness that may develop into hypersensitivity of the nerves, i.e., neuropathy. 2. Muscle shortening may be triggered by stress, including emotional, physical, external, and internal factors. 3. Muscle shortening increases mechanical tension on the muscles as well as inducing abrasion of the tissues by stretching ligament, tendon, cartilage, bone, and etc. 4. Pain from neuropathy is normally manifested on musculoskeletal system and spasm or shortening play as the central axis of this pain. 5. Neuropathy often appears at the nerve root level and the most important decisive factor of radiculopathy is muscle shortening. 6. Spondylosis is the most common cause of radiculopathy. 7. The most significant treatment principle of IMS is to relieve muscle shortening and remove stimulating determinant from the vertebrae. 8. Dry needling is quite effective for treating various pain caused by muscle shortening.

• Nutrition Research and Practice
• /
• 제3권2호
• /
• pp.102-107
• /
• 2009

Fish oil and shortening have been suggested to have opposite effects on cardiovascular disease (CVD). This study investigated the effect of shortening and fish oil on CVD risk factors and aorta histopathology, and the association between risk factors and aorta histopathology. Male Wister rats (n=30) were fed an AIN-93G diet containing 20% fat in the form of fish oil, shortening, or soybean oil for 4 weeks. Total cholesterol (TC), triacylglyceride (TG), and C-reactive protein levels were significantly (P<0.001) lower in the fish oil than in soybean oil and shortening groups. HDL-cholesterol concentrations were significantly different (P<0.001) between groups. In addition, LDL-cholesterol levels were significantly (P<0.001) lower in the fish oil and shortening groups than in the soybean oil group. Insulin and glucose concentrations did not differ among groups. Effect of dietary fat on tissue fatty acid composition significantly differed in abdominal fat and brain compared with RBC, heart, kidney and liver. The aortic wall was significantly (P=0.02) thinner in the fish oil group than in the soybean oil and shortening groups. The aortic wall thickness was positively correlated with TG and TC, but negatively with EPA + DHA levels of all tissues. These results suggested that fish oil had protective effects on aorta histopathology by hypolipidemic action in this rat model.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.173-174
• /
• 2009

본 연구는 최근 초고층 건축물의 등장으로 인하여 기존의 토목 구조물에서만 사용되었던 축소량에 대하여 검토가 시작되었다. 이러한 수직부재에 대한 축소량의 검토는 기본적으로 콘크리트가 받는 하중, 재료특성 등으로 발생되는 변형을 기본으로 하고 있다. 하지만 이러한 콘크리트가 받는 작용 인자나 특성을 가지고 계수 산정을 통한 축소량 해석을 하고 있지만, 각각의 재료시험적인 측면에서의 분석을 다소 미미하게 되고 있다. 따라서 본 연구에서는 수직부재 즉 기둥축소량 보정을 위한 기본적인 재료시험항목에 대하여 각각을 분석하여 축소량 보정을 위한 계수산정전 재료시험의 신뢰성을 파악하고 이에 대한 성능적인 검토를 하고자 하는데 목적이 있다.

• 대한물리치료과학회지
• /
• 제18권1호
• /
• pp.51-60
• /
• 2011

Purpose: The purpose of this study was to investigate hamstring length during static uprighting position using weight distribution ratio. Methods: Ninety-six volunteers(56 males) were participated. The active knee extension test(AKE) was measured 3 times on both legs. The mean score of AKE was obtained. Then, the measurement of weight distribution ratio was observed 3 times on both legs, and its mean value was also calculated. Subjects were divided four groups based on their hamstring length measurement; both hamstring shortening group, left hamstring shortening group, right hamstring shortening group and normal hamstring length group. One-way ANOVA was employed to analyse collected data. Pearson's correlation was also hired to see any relationship between the hamstring length and the weight distribution. Results: In anterior/left area and posterior/right area, both hamstring shortening group left hamstring shortening group were superior to right hamstring shortening group and normal hamstring length group. Significant difference was existed statistically(p<.05) between groups. The correlation analysis between hamstring length and weight distribution ratio has not been shown any significant findings(Pant/post=0.733, Plt/rt=0.135). Conclusion: The results of the study may be applied to therapeutic management in posture and movement skill in musculoskeletal physical therapy.

• 한국임상수의학회지
• /
• 제15권1호
• /
• pp.94-99
• /
• 1998

This study was carried out to determine the effects of uterus shortening on the duration required for estrus, the number of ovulation and the level of serum progesterone and prostaglandin $F_{2}{\alpha} (PGF_{2}{\alpha} $). The duration required for estrus after the surgical shortening of uterine horns and the interval between the following estrus was not affected by the surgical treatment but affected by luteal and follicular phase. The number of ovulations were increased by induction of superovulation to gilts with shortened uterine horns compared to the control. Serum progesterone concentration during the luteal phase was higher than that during the follicular phase with no difference between the control and me horns than that of the control. Findings of this study indicate that luteal formation and regressions and estrus cycle were normal when the unconnected parts of uterine horns were left in abdominal cavity. Therefore surgical shortening of uterine horns of sows helps embryo collections by non-surgical methods.

• Advances in concrete construction
• /
• 제10권6호
• /
• pp.527-536
• /
• 2020

In this study, a process is proposed to calculate analytical correction values for the vertical shortening of all columns on all floors in a high-rise building that minimizes the error between the structural analysis predictions and values measured during construction. The weight ratio and the most probable value were accordingly considered based on the properties of the shortening value analyzed at several points in each construction stage and the distance between these measured points and unmeasured points at which the shortening was predicted. The effective range and shortening value normalization were considered using the column grouping concept. These tools were applied to calculate the error ratio between the predicted and measured values on a floor where a measured point exists, and then determine the estimated error ratio and estimated error value for the unmeasured point using this error ratio. At points on a floor where no measured point exists, the estimated error ratio and the estimated error value were calculated by applying the most probable value considering the weight ratio for the nearest floor where measured points exist. In this manner, the error values and estimated error values can be determined at all points in a structure. Then, the analytical correction value, defined as this error or estimated error value, was applied by adding it to the predicted value. Finally, the adequacy of the proposed correction method was verified against measurements by applying the analytical corrections to all unmeasured points based on the points where the measurement exists.

• 지질공학
• /
• 제24권3호
• /
• pp.311-322
• /
• 2014

Limestone bodies under the tectonic environment have experienced various tectonic processes, and also changed the stress state. In this study, calcite twins found in limestones of the Joseon Supergroup and Pyeongan Supergroup in the northeastern part of the Ogcheon Belt, South Korea were measured, then the paleostress (i.e., the maximum shortening axis) was reconstructed using the new calcite strain gauge (NCSG) technique. The average twin thickness and average twin intensity increase as the total twin strain increases. We utilize the appearance of twins, the average twin thickness and average twin intensity, and the total twin strain to estimate that the observed calcite twins were produced at temperatures of < $200^{\circ}C$ in the Joseon Supergroup and $170^{\circ}C$ in the Pyeongan Supergroup. In the Joseon Supergroup, the dominant direction of the maximum shortening axis WNW-ESE to NW-SE; NE-SW shortening is also observed. The maximum shortening axes in the Pyeongan Supergroup are oriented NW-SE and NE-SW. The NE-SW direction of maximum shortening is associated with the occurrence of the Songrim orogeny of the Paleozoic to Early Jurassic, and the NW-SE direction of maximum shortening correlates to the Daebo orogeny of the Early Jurassic to Late Jurassic. It is thus concluded that the paleostress across the study area changed from NE-SW to NW-SE during the Mesozoic.

• 한국전산구조공학회논문집
• /
• 제33권4호
• /
• pp.237-244
• /
• 2020

본 논문에서는 포스트 텐션으로 보강된 아웃리거 벽체의 부등기둥축소량 저감 효과를 확인하였다. 아웃리거 벽체 시스템을 사용할 경우 콘크리트 부재를 아웃리거로 사용하기 때문에 아웃리거 벽체의 장기거동도 고려해야 한다. 아웃리거 벽체은 깊은 보의 형태로 전단 응력이 지배적이기 때문에 전단 응력을 받는 콘크리트의 장기거동에 대한 이론 연구를 수행하였고 그 결과를 유한요소해석에 적용하였다. 아웃리거의 장기거동 고려 시 부등기둥축소량과 아웃리거에 작용하는 전단력을 확인하였으며, 설계 변수인 아웃리거의 두께를 변경해가며 해석하였다. 해석 결과 부등기둥축소량은 증가하고 아웃리거에 작용하는 전단력은 감소함을 밝혔으며 아웃리거의 강성이 작을수록 그 효과가 크다는 것을 밝혔다. 이후 아웃리거의 장기거동으로 인해 증가한 부등기둥축소량을 감소시키기 위해 포스트 텐션 공법으로 보강하는 방법을 제안하고 그 효과를 확인하였다. 프리스트레스 도입 직후의 프리스트레스 손실과 장기거동에 의한 프리스트레스 손실을 모두 고려하였다. 해석 결과 포스트 텐션 공법의 뛰어난 부등기둥축소량 저감 효과를 확인하였으며, 프리스트레스의 크기가 증가할수록 그 효과가 증가함을 밝혔다.

• 콘크리트학회논문집
• /
• 제16권1호
• /
• pp.36-42
• /
• 2004

철골철근콘크리트(SRC)가 초고층 건물에서 광범위하게 사용되고 있음에도 불구하고 SRC 구조부재에 대해 축소량 예측을 위한 도구는 철근콘크리트에 대한 재료적인 특성만으로 구성된 이론식을 적용하는 많은 문제를 안고 있다 따라서 본 연구는 초고층 건물의 기둥 축소량을 계산하는 기존의 방법에 대해 정확성을 평가하였다. 연구의 진행 방법은 다음과 같다. 우선 SRC 구조부재를 사용하여 만들어진 초고층 건물의 기둥축소에 대한 실측자료를 선정하였다. 다음으로는 전산해석 프로그램을 이용하여 SRC 구조부재에 대해 기둥 축소량을 계산하였다. 끝으로 측정자료와 해석자료를 비교하였다. 결론적으로 측정자료와 해석자료는 매우 근사한 차이를 나타냈다. 그러므로 기존의 방법은 SRC 구조부재를 사용하는 초고층 건물의 기둥 축소량을 평가하기 위해 사용되어도 될 것으로 사료된다.