• Physical Therapy Korea
• /
• v.9 no.3
• /
• pp.93-99
• /
• 2002

Traditionally, ultraviolet (UV) has been used for treating the pressure sore and skin wound. The effects of UVA and UVB radiation on disinfection have been reported. The purpose of this study was to examine the effectiveness of UVC radiation on disinfection of Escherichia coli, Staphylococcus aureus, Salmonella typhimurium in vitro. Three bacterium were radiated by UVC (250 nm, 20 seconds) and incubated at $37^{\circ}C$ for 24 hours at the agar culture medium. Kill rates of all three bacterium were 99.9%. UVC radiated on three kinds of bacterium for 30 or 60 seconds. Kill rates were 99.9% both 30 and 60 seconds. This data suggests that UV light at 250 nm could be a useful method to minimize infection and shorten healing time in pressure sore and skin wound condition.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.358-360
• /
• 1995

PZT powders were prepared by the molten salt synthesis method. The porous PZT specimens were prepared from a mixture of PZT and polyvinylalcohol(PVA) powders by BURPS(Burnout Plastic Sphere) technique. The pulse-echo response of porous PZT transducer with various PVA wt.% were studied. The fall time of pulse-echo response of porous PZT transducer was shorten to that of solid PZT-maded transducer. Therefore, a good transmitting and receiving properties could be obtained. The distance between transducer and reflector was in good agreement both solid PZT and porous PZT fabricated transducer.

• Industrial Engineering and Management Systems
• /
• v.14 no.3
• /
• pp.289-298
• /
• 2015

This paper analyses the best batch formations for order picking throughput in narrow-aisle order picking systems. Our analytical comparison finds that a high pick density variation leads to a heavy picker blocking. Simulation experiments show that a distance-based batching algorithm reduces picker blocking by decreasing the number of aisles visited and stabilizing the variation in number of picks per aisle by packing orders tightly, and that the solution quality and mechanism for determining the batch size dictated by the sorting strategy causes varying amounts of blocking. We conclude that combining a distance-based batching method with an appropriate batch sizing strategy will reduce picker blocking and shorten travel in narrow-aisle picking systems.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.3 s.246
• /
• pp.231-240
• /
• 2006

Immersive virtual reality (VR) for the manufacturing planning helps to shorten the planning times as well as to improve the quality of planning results. However, VR equipment is expensive, both in terms of development efforts and device. Engineers also spend time to manually repair erroneous 3-D shape because of imperfect translation between 3-D engineering CAD model and VR system format. In this paper a method is proposed to link 3-D engineering CAD model to a multichannel visualization system with PC clusters. The multichannel visualization module enables distributed computing for PC clusters, which can reduce the cost of VR experience while offering high performance. Each PC in a cluster renders a particular viewpoint of a scene. Scenes are synchronized by reading parameters from the master scene control module and passing them to client scenes.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.306-311
• /
• 2005

In this paper, the electromagnetic force acting in the arc column of 3 different extinction units is compared with using the FEM (Finite Element Method) and the arc velocity is calculated by the drag force of the fluid mechanics. The experiment for breaking the arc current was performed in each model at 100 volts in order to measure the arcing time. The outcome was compared with the computing value. As a result, this paper proposes that the divided U-shaped grid is able to shorten arcing time and improve the electric performance. It also suggests a methodology for comparing and analyzing the result obtained by simulation and experiment.

• Journal of Biosystems Engineering
• /
• v.31 no.5 s.118
• /
• pp.416-422
• /
• 2006

Drying characteristics of green onion and onion during fluidized and fixed bed drying were investigated and compared. Sliced peen onion and onion were dried at drying air temperature of 45, 55, and $65^{\circ}C$. Drying air velocity during fluidized bed drying was adjusted with drying time at each drying temperature. Drying time to reach a given final moisture content was shorten in fluidized bed drying than in fixed bed drying - for drying temperature of 45, 55, and $65^{\circ}C$, the differences were 60, 60, and 50 min for green onion and 360, 180, and 60 min for onion. Drying constant (K) was greatly affected by drying method and drying temperature. Terminal velocity under fluidized bed drying was decreased exponentially for green onion and linearly (or onion with increase of drying temperature. Also, terminal velocity had linear relationship with moisture content for both green onion and onion.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.412-412
• /
• 2000

This paper presents a task teaching method for off-line programming of a multi-robot system. Teaching commands were developed in order to simplify a complex teaching process, to shorten the setup time for new working environment and to have flexibility for changes in working environment. Four teaching commands can be used to automatically generate trajectories of an end-effector of the robot in electronics assembly line. The robots used in the work cell are a four-axis SCARA robot and six-axis articulated robot. Each robot is controlled in a independent way while objects, working environment and robots are modeled in corresponding modules, respectively. The off- line programming system developed uses OpenGL for a smooth graphic effect in Window s where three dimensional CAD data can be leaded for graphical modeling.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.651-652
• /
• 2006

The choice of suitable hip implant is one of important factors in total hip replacement (THR). In clinical view points, improper adaptation of hip implant might cause abnormal stress distribution to the bone, which can shorten the lifespan of replaced hip implant. Currently, interest in custom-designed hip implants has increased as studies reveals the importance of geometric shape of patient's femur in modeling and designing custom hip implants. In this study, we have developed the custom-designed hip implant models with various sizes in hip implant, and the stress distribution in the bone was analyzed using Finite Elements methods. It was found that minimizing the gap between implant stem and femoral cavity is crucial to minimize stress concentration in the bone.

• Journal of Chest Surgery
• /
• v.27 no.12
• /
• pp.1060-1065
• /
• 1994

For most surgeons, stomach and colon are the first choice for reconstruction of the esophagus, as well as for bypass. When the esophagogastric or esophagocolonic anastomosis is made in the neck, cervical anastomosis site leakage is the main complication. In our most recent four patients who underwent a transhiatal & posterior mediastinal esophagogastric or esophagocolonic anastomoses following esophageal resection, we performed the cervical anastomoses with a circular EEA stapler. No leaks have developed at the anastomosis site. In these four patients the cancer was tiny and was located on the upper or middle third of the thoracic esophagus. A total esophagectomy was performed by blunt resection without thoracotomy. Surgical staplers have been used previously for esophagogastric anastomosis through a right thoracotomy with a very low rate of leakage. When the esophagogastric or esophagocolonic anastomosis is performed in the neck, the prevalence of leakage does not increase the postoperative mortality, but it can increase significantly the duration of hospitalization and morbidity. The use of the circular stapler allowed us to perform four consecutive cervical esophagogastric & esophagocolonic anastomoses without any leakage and to shorten the operating time.

• Asia pacific journal of information systems
• /
• v.11 no.3
• /
• pp.63-89
• /
• 2001

The purpose of this research is to develop strategic alternatives for the high-tech products development by comparatively studying characteristics of the industry and R&D structures in Korea and the US. Some of the environmental, strategic, organizational and project teams' characteristics are studied. Data were collected from Korea and US high-tech companies through interviews and questionnaires and event analysis method was used to analyze them. The findings are as follows: First, when the level of market concentration is high, cycle time tends to be longer. Therefore, if there are many competitors in the market, new products development should be swift due to competitive pressures. Second, the developmental strategy should be directed toward the existing customers to speed up new products development. That is, a defensive strategy would result in a shorter cycle time and response time compared to a strategy directed to a niche market. Third, when the level of formalization is high, cycle time tends to be shorter. This means that formal procedures for new products idea development or new products development policies shorten new products development time.