• Journal of Electrical Engineering and Technology
• /
• v.1 no.4
• /
• pp.423-426
• /
• 2006

Distance relays achieve selective tripping by measurement of all short circuit fault conditions inside set reaches. The direction of the fault, forward or reverse is commonly determined with a dedicated measurement to ensure selectivity under all conditions. For the direction decision (measurement) a number of alternatives are available. This paper describes a loop selective direction measurement and illustrates by means of a typical fault why this is superior to a non loop selective direction measurement such as that based on negative sequence quantities.

• Korean Journal of Mathematics
• /
• v.30 no.4
• /
• pp.571-592
• /
• 2022

By established a Banach space with the Hausdorff distance, we introduce the alternative fixed-point theorem to explore the existence and uniqueness of a fixed subset of Y and investigate the stability of set-valued Euler-Lagrange functional equations in this space. Some properties of the Hausdorff distance are furthermore explored by a short and simple way.

• Korean Journal of Applied Biomechanics
• /
• v.17 no.2
• /
• pp.227-237
• /
• 2007

The purpose of this study was to examine the effect of precision that kinematics had when short approach shots were taken. In this study, the subjects chosen were 5 skilled and 5 unskilled subjects, who were allowed to shoot 10 rounds of shots at target distances of 1m, 2m, 4m, and 8m. Three dimensional analysis was used as methods to obtain kinematics of each shots. In order to verify the statistical significance of the kinematic factors followed by the results of different skills and target distances, we used the two-way repeated ANOVA. The study was experimented within the level of p<.05. The results obtained were as follows: 1) the difference of shots of the forward and backward variations were larger than those of the left and right variations, the unskilled subjects' shot distances greatly got larger than that of the skilled subjects as the distance of the target increased, 2) not being affected by the target distance variations, the skilled subjects' rate of down-swing was shorter than the back-swing on short approach shots, 3) the skilled subjects' center of body weight tended to move more naturally towards the target when doing the down-swing to finish than that of the unskilled subjects on short approach shots, 4) the skilled subjects' right hand angle of cocking were narrower and tended to be kept much more consistent than that of the unskilled subjects on short approach shots, 5) the unskilled subjects when doing their back-swings, their right hips swayed towards the back, their trunk-flexion angles were shown to be lower than that of the skilled subjects on short approach shots, 6) the skilled subjects`body weight tended to move more naturally towards the left foot when doing the down-swing to finish than that of the unskilled subjects on short approach shots.

• Journal of Distribution Science
• /
• v.12 no.10
• /
• pp.99-108
• /
• 2014

Purpose - The goals of this study are the following. First, this study focused on customer satisfaction of in-flight service. Specifically, in-flight duty free items were considered because of their potential value related with the differentiated strategy of airline companies. Second, this study analyzed feasible strategies that would fence off the aversive attitudes of consumers toward innovation regarding in-flight duty free items. Third, this study strived to discover implicit routes related with the reactions of of consumers to innovation. Fourth, the construal level theory was applied to the context of in-flight service. Psychological distance is expected to promote acceptance of innovation for duty free items. Research design, data, and methodology - This study consisted of three experiments. All data were collected through the participation of university students. First, the experiment employed a 2×2 between-subject design. The first independent variable was temporal distance (long vs. short of navigation time). The second independent variable was innovativeness (innovative duty free items vs. typical items). Further, experiment 2 involved a 2×2 between-subject design. The first independent variable was social distance (typical vs. atypical stewardess image). The second was innovativeness that was based on a pattern similar to that of the prior experiment. The third experiment involved a 2×2×2 design. The first and second independent variables were temporal distance and item innovation, respectively, based on the method of experiment 1. The third independent variable was cognitive depletion (depletion vs. control condition). Results - Experiment 1 demonstrated that the innovation of duty free items would need to consider the journey time of the airline. Specifically, innovative items were preferred in case of a long journey; typical items, however, were liked in a short journey. Further, experiment 2 demonstrated that, in spite of a short journey, innovative items would be preferred if an atypical stewardess was serving. An atypical stewardess was linked with social distance, and the psychological effects would activate a creative and flexible mindset that would fit with innovative duty free items. The final experiment was accomplished for the examination of cognitive processing of psychological distance on innovation-acceptance. Specifically, if the effects were related with systematic processing, then cognitive effort would be needed. In contrast, if they were related with heuristic processing, then such efforts would not be required. The same pattern appeared under both cognitive depletion and control condition; therefore, the effects of psychological distance were implied to be heuristic processing. Conclusions - Managers need to consider the navigation time, stewardess concepts, and depletion of consumers as important factors for innovative strategy regarding in-flight service. Longer journeys are more successful for innovative trials. Further, a more atypical stewardess image is more successful for atypical service. Long navigation and unfamiliar stewardesses may activate creative and flexible thinking. Further, cognitive depletion of consumers is not a dominant factor of psychological distance effects, because the effects are not related with systematic processing, but with heuristic processing.

• Korean Journal of Digital Imaging in Medicine
• /
• v.12 no.2
• /
• pp.119-125
• /
• 2010

In order to demonstrate the value of long-distance radiography, we have studied how distance affects images in chest frontal radiography and compared short-distance and long-distance images in chest lateral radiography. Cardiothoracic ratio(CTR %) of 50 patients with no disease in the chest(10 each at the age of 20~60) were evaluated in Supine AP(100 cm), Sitting AP(100 cm), Sitting AP(180 cm), and Erect PA(180 cm). In lateral radiography, we evaluated and compared left lateral radiography(100 cm and 180 cm) of the patients based on the horizontal maximum of the heart. The average value of CTR(%) were 0.48 in Erect PA(180 cm), 0.52 in Supine AP(100 cm), 0.50 in Sitting AP(100 cm), 0.49 in Sitting AP(180 cm), which were Supine AP(100 cm) > Sitting AP(100 cm) > Sitting AP(180 cm) > Erect PA(180 cm). The average value of Maximum transverse diameter of left of the cardiac(MLD), which showed how much axis of spine was slanted to the left, was 90.67 mm in Erect PA(180 cm), 103.92 mm in Supine AP(100 cm), 93.54 mm in Sitting(100 cm), 89.84 mm in Sitting AP(180 cm), 58.11 mm in the minimum value and 118.79 mm in the maximum value. The average value of Maximum transverse diameter of right side of the cardiac(MRD), which suggested how much axis of spine was slanted to the right, was 47.18 mm in Erect PA(180 cm), 48.12 mm in Supine AP(100 cm), 44.98 mm in Sitting AP(180 cm), and the minimum value 26.84 mm and the maximum value 65.30 mm. There was no standard method to calculate; therefore, the horizontal maximum of the heart was used for lateral radiography. The average value was 121.07 mm in 100 cm and 109.76 mm in 180 cm. Sitting AP(180 cm) among the types was closest to C-PA(180 cm). As a result, during C-AP radiography, long-distance radiography lessened shadow of the heart more than that of short distance, Sitting position more than Supine position.

• Journal of the Korean GEO-environmental Society
• /
• v.3 no.3
• /
• pp.27-36
• /
• 2002

Generally, it is known that urethane injection is excellent in long-term durability and environment friendly for ground improvement. However, urethane grouting has short rise time thus the penetration distance from the injection point is so short. Therefore, urethane injection cannot be used for the site where requires ground improvement in deep location from the injection point. Other injection materials such as cement cannot be alternatives when rapid hardening is required. From this study, we improve disadvantage urethane injection by developing TAS method. From the field tests, it is ascertained that TAS increases injection distance over 10m, which is further than that of original urethane grouting. In addition, TAS has relatively short Rise-time compared to cement grouting thus instantaneous improvement can be mobilized right after the injection. Short Rise-time and long penetration distance provide excellent applicability for tunnel construction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.271-279
• /
• 2008

In this paper, we investigate interference between short-range radiocommunication devices(SRDs) with frequency hopping spread spectrum(FHSS) and direct sequence spread spectrum(DSSS) methods when they are in the same frequency bands. In order to analyze interference from unwanted emission of SRD with DSSS to that of FHSS, Monte-carlo(MC) simulation method is employed and interference probabilities are calculated. We simulate interference scenarios in accordance with several duty cycles and bandwidths. It is also assumed that the propagation model is free space. The effect of distance between interfering transmitter and victim receiver is analyzed and bit error rate(BER) is simulated. From the interference analysis results, it is shown that duty cycle affects compatibility more than band-width does. Also, we can make sure of the separation distance which satisfies BER criterion when there are only one interfering transmitter and multiple interfering transmitters.

• Proceedings of the KOSOMBE Conference
• /
• v.1993 no.11
• /
• pp.13-16
• /
• 1993

In this paper the morphological characteristic parameters according to the Lee's physical constitution theory are suggested using the X-ray computed tomography. The Lee's physical constitution theory is classify into 4 physical constitutional types by the relative degree of visceral function: those are macro-negative(strong liver- weak lung), micro-negative(strong kidney- weak spleen), micro-positive(strong spleen- weak kidney) and macro-positive(string lung- weak liver). The morphological characteristic parameters are the following. The AA-line is the distance between Rt. & Lt. acupuncture point keug-cheun. The BB-line is the length of lung. The CC-line is the longest width of thorax. The DD-line is the vertical distance between the CC-line and the EE-line. The EE-line is the distance between the Rt. and Lt. anterior superior iliac spines. As the results macro-negative(strong liver-weak lung) has the longest CC-line and the short BB-line. Micro-negative(strong kidney-weak spleen) has the longest EE-line and the short CC-line. Micro-positive(strong spleen-weak kidney) has the longest DD-line and the short BB-line. And macro-positive(strong lung-weak kidney) has the longest BB-line and the short EE-line.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.907-913
• /
• 2023

Currently, the sprinkler method is widely used as an initial suppression method in existing firefighting systems. However, this method can cause significant damage to both equipment and facilities in the hydration area. To minimize this damage, fire extinguishing monitors are being developed that can spray fire extinguishing water directly at the point of fire. These monitors are installed on the top floor of the ship, such as the Living Quarter and Ventilation System. While conventional fire extinguishing monitors focus on lightweight research with a short spray port and require a spray distance of about 40 to 45m, recent developments necessitate a longer spray port, similar to a water cannon, requiring a spray distance of about 70 to 75m. This study aims to predict the injection distance of both the existing ship-installed fire extinguisher and the long spray port fire extinguisher through hydrodynamic computer analysis, and to determine whether the injection distance has increased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.