• Tribology and Lubricants
• /
• v.10 no.1
• /
• pp.14-26
• /
• 1994

The minimum oil film thickness(MOFT) in the connecting-rod bearing of a 1.5 liter, L-4, gasoline engine is measured up to 5500 rpm and calculated to study the dynamically loaded engine bearing. Short bearing approximation and Mobility method are used for theoretical analysis of oil film characteristics. And cylinder pressure, crank-pin surface temperature and bearing temperature are measured as the input data of theoretical analysis. The MOFT are measured by the total capacitance method(TCM). To improve the reliability of the test results, a reasonable determination method of bearing clearance is introduced and used, and the effects of cavitation and aeration on the test results are neglected. The crankshaft is grounded by means of a slip ring. A scissor type linkage system was developed to measure the MOFT and bearing temperature. The effects of engine speed, load and oil viscosity on the measured and calculated minimum oil film thicknesses are investigated at 1500 to 5500 rpm. From the comparison between the measured and calculated MOFT, it is found that a qualitative similarity exists between them, but in all cases, the measured MOFT are smaller than those calculated.

• Applied Microscopy
• /
• v.25 no.1
• /
• pp.111-121
• /
• 1995

The ultrastructure of spermatozoa in Hynobius leechii was examined with transmission electron microscope and compared with those of other urodeles and anurans. The perforatorium and the tail show most of the common feature of urodeles. However, there were several ultrastructural characteristics in an acrosome, nucleus, neck, axial rod and mitochondria related to the nucleus. The acrosome was trifoliate in transverse sections and the perforatorium consisted of two different concentric parts with a fine sharp point in a subacrosomal lumen. The nucleus consisted of two different regions of chromatin area and nuclear ridge. The nuclear ridge was composed of several bundles of five to ten minute tubular subunits of 19 nm diameter in this species, while in higher urodeles it was well developed in multi layers. The protoplasmic bead was separated by a cytoplasmic canal except the connection with only the distal portion of the nucleus. The neck was a short cylinder and contained pericentriolar material with transverse striations. In Hynobius the ring was not elongated to the tail and the mitochondria were distributed only in the protoplasmic bead around the nucleus as in Cryptobranchus, while in higher groups of urodeles it elongates to the length of the middle piece and the mitochondria follow the ring. The ring elongation may be related to the distribution of mitochondria. Hynobiidae and Cryptobranchidae are closely related based on structure of neck, the axial rod and location of mitochondria, although they are different in the composition of the axial rod.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.265-268
• /
• 2008

Prestressed Concrete Cylinder Pipe(PCCP) had became one of the dominating kinds of pipes substituting for steel pipes because of its unique feature (high intensity, high pressure and high leakproofness). PCCP was produced firstly by Bonna company in France. By the end of 20th century, there were over 19000 km of this product installed in America. PCCP was introduced from Ameron company by Shandong Eletric Power Pipeline Engineering Company in 1988. As the statistical data in 2002, 700 km of PCCP had been applied in China, and the application trended towards rapid increase.Since prestressing wire would be corroded in environment, Several accidents due to the breakdown of pipe had happened. Consequently the external wall of pipe should be covered with protective coatings. There was a lack of technical study in corrosion and control of PCCP, because PCCP had been applied for a short time in China. in order to ensure the service life of PCCP, we have developed a kind of protective coating for concrete pipe, which had high intensity and anti-corrosive property with convenient applicability. The physical and chemical properties, painting technology and field application of this coating was introduced in the paper, at the same time, the future of external protective coating for PCCP was looked into.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.446-458
• /
• 2000

In this study, compressive strengths of three condensable composite resins(ALERT, SureFil, Solitaire), conventional hybrid composite resin(Z-100) and amalgam(HI-Aristaloy 21) according to the 6 types of cavity design(cylinder, trapezoidal, butt-joint, round bevel, long bevel and short bevel) were measured and appearance of fracture surfaces were observed with SEM, thus evaluated clinical applications of condensable composite resins according to the cavity designs. The results were as follows; 1. Compressive strengths according to experimental materials were the highest in SureFil, and Z-100, ALERT, Solitaire, HI-Aristaloy 21 in order. 2. SureFil showed the highest compressive strength(p<0.05). compressive strengths of ALERT and Solitaire were lower than that of Z-100, hybrid composite(p<0.05). 3. Compressive strengths according to specimen design were the highest in trapezoidal shape(p<0.05) and no significant difference was detected between other specimen designs. 4. The appearance of condensable composite resin under SEM was of a diverse configuration according to component of resin matrix, shapes of filler and surface treatments between resin and filler.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.3
• /
• pp.567-572
• /
• 2009

In this study, the effects of counter ion valency of the electrolyte on the colloidal repulsion between two parallel cylindrical particles were investigated. Electrostatic interactions of the cylindrical particles were calculated with the variation of counter ion valency. To calculate the electrical repulsive energy working between these two cylindrical particles, Derjaguin approximation was applied. The electrostatic potential profiles were obtained numerically by solving nonlinear Poission-Boltzmann (P-B) equation and calculating middle point potential and repulsive energy working between interacting surfaces. The electrical potential and repulsive energy were influenced by counter ion valency, Debye length, and surface potential. The potential profile and middle point potential decayed with the counter ion valency due to the promoted shielding of electrical charge. On the while, the repulsive energy increased with the counter ion valency at a short separation distance. These behaviors of electrostatic interaction agreed with previous results on planar or spherical surfaces.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.5 s.118
• /
• pp.9-15
• /
• 2006

Wet compaction test (WCT) is a fiber evaluation method where wet fibers are compressed at one side of a cylinder and water drains out from the other side. The consistency of the fiber furnishes and their pressures are recorded during the test. In the previous study we found that WCT results always gave better coefficients of determination in fiber furnish drainage, and paper properties (density, tensile, tear, and burst strength) than those of WRV (water retention value). Fiber freeness and fiber length correlated well with drainage and tear strength of the furnishes, respectively; however, their correlations were very much improved by combining the WCT results. In this study, we used the WCT test for fractionated fiber furnishes to see whether improvement of the WCT is possible. We found that strength properties such as breaking length and burst index were correlated better with the fractionated long fiber furnishes. Drainage was greatly affected by the presence of short fiber furnishes. We used bleached chemical pulps (SwBKP, HwBKP), recycled pulp (OCC), and mechanical pulp (BCTMP) as fiber furnishes in this study. Fiber fractionation can be performed on-line in these days by using multifractor and WCT can be used as an on-line test in papermachine in the future.

• Journal of Ocean Engineering and Technology
• /
• v.37 no.3
• /
• pp.89-98
• /
• 2023

Analyzing the interactions of free surface waves caused by a submerged-body movement is important as a fundamental study of submerged-body motion. In this study, a two-dimensional mini-towing tank was used to tow an underwater body for analyzing the generation and propagation characteristics of free surface waves. The magnitude of the maximum wave height generated by the underwater body motion increased with the body velocity at shallow submerged depths but did not increase further when the generated wave steepness corresponded to a breaking wave condition. Long-period waves were generated in the forward direction as the body moved initially, and then short-period waves were measured when the body moved at a constant velocity. In numerical simulations based on potential flow, the fluid pressure changes caused by the submerged-body motion were implemented, and the maximum wave height was accurately predicted; however, the complex physical phenomena caused by fluid viscosity and wave breaking in the downstream direction were difficult to implement. This research provides a fundamental understanding of the changes in the free surface caused by a moving underwater body.

• Journal of Conservation Science
• /
• v.29 no.2
• /
• pp.171-185
• /
• 2013

The purpose of this study were to interpret making characteristics and clay sources for Proto-Three Kingdoms period potteries which were excavated from Bakjimeure site in Tangjeong, Asan, Korea, on the basis of shape types. The pottery samples of the studied included deep bowl pottery, cylinder shaped pottery, duck shaped pottery and rounded based jar with short neck. And the last jar was dominant among them. This is supported in nearby Yongduri Jinter site, Galmaeri site and Baekseokdong site. They vary in terms of color of clay, absorption ratio and mineral classification. Based on the fact that their absorption ratio range was 4.50 to 25.19% and firing temperature range was 850 to $1,150^{\circ}C$, they were thought to be widely used. The equivalence of cylinder shaped pottery, duck shaped pottery and deep bowl pottery was high in terms of material characteristics and their firing temperature range was 850 to $950^{\circ}C$. However, the deep bowl pottery, compared to other pottery shapes, contained great amount of coarse grained quartz and feldspar, and was different from others in terms of function. For soil sample collected from relative plains (area 3) in the southernmost part of the site, their mineralogical and geochemical characteristics were the most similar to those of the potteries excavated from the Bakjimeure site and even most of the potteries collected from different sites.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.2 no.1
• /
• pp.153-169
• /
• 2007

It is as result that study to apply mini magnet nerve curer in peripheral nervous system disease treatment. Design and embodied action power and Control Unit in cylinder form of magnet roof object firstly. Yielded service area about special quality of probe of roof object cylinder style and treatment area dimension and distance of treatment pulse secondly. Embody pulse forming course energy value by Probe's form by third, could embody treatment pulse by disease. Specially, through a special quality experiment, saved Damping pulse form and treatment pulse form etc. variously. Lately, embodied this to aid a little in disease treatment that follow that there is no invasion that there is no stimulation by medicine development. Go amplitude treatment pulse (traditional magneto-therapy of greatly great that strong) does curative effect greatest at short time and becomes thought that demand is magnified greatly at the future in this research.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.73-104
• /
• 2007

Centering around ruins recognized of being relatively early stage related to flat tile and brick, excavated in Silla capital area, the study attempted elementary approach to seek the appearance time of every remain through comparing them from the excavated cases and production methods of Short beating, Medium beating plate, Long beating plate and Stamped-roof tile. Gyeongju began to use the short beating plate made of tile-less plates or tile plate and increased its quantity. That is deemed to be due to efficiency of beating plate making methods, and moreover to be limited only for use in the palace castle and offices. That is, making short beating plates is presumed to be made merely under some definite objectives. Medium beating plate has been spread to the whole country since Silla and Baekje united. Differently from Koguryo and Baekje, Silla had its unique Beating-plates making technology available for mass-production, which was spread to the whole country and resulted in disappearing of Koguryo and Baekje technology. Long beating plate was not nearly founded in Gyeongju area, but flat tile and common tile excavated in Sachunwang Temple site and Samrang Temple 3rd remains are known. In the outskirts of Gyeongju, long beating plate appeared between the latter half of 8C and the beginning of 9C. Until now, different views have raised to appearance of long beating plate of Unified Silla, which is expected to be clarified under the situation excavated by position relations. Stamped-roof title in Gyeongju is estimated as used after the datum point year 679. While in Baekje area, five stems and branches were involved, in Silla area, code or sign was shown much. The difference between two areas would be due to each other factory, and especially the marked contents werenot letters, which means it had been changed from Baekje s existing-methods. That is, it says the production environment changed owing to Silla's merging. And stamped-roof tile was temporarily used in Gyeongju but soon disappeared, which was because Silla beating plates made under cylinder-shaped tile barrel(圓筒瓦桶) and hitting-pressing of Medium beating plate had beenspread to the whole country, so the production technology of Koguryo and Baekje was naturally dismissed. In consequence, the mergence by Silla brought about unification of each nation's special technology.