• 한국전자파학회논문지
• /
• 제18권5호
• /
• pp.563-568
• /
• 2007

본 논문에서 제안된 패키지 안테나는 900 MHz RFID 대역에 적용하기 위하여 미엔더 라인과 단락 핀을 부설하고 LTCC(Low Temperature Cofired Ceramic) 층의 공동 내부에 RFID BGA(Ball Grid Array) 칩을 장착하였다. BGA 칩과 안테나 사이에 발생되는 커플링과 혼신을 감소시키기 위한 격리 특성을 확보하기 위하여 접지면과 비아 펜스를 부설하여 Faraday Cage를 구현하였다. 제안된 안테나는 낮은 주파수 대역에서 패키지 단계의 안테나 구현에 관점을 두었다. 제안된 안테나의 크기는 $13mm{\times}9mm{\times}3.51mm$이며, 측정된 안테나의 공진 주파수는 0.893 GHz, 임피던스 대역폭은 9 MHz, 최대 방사 이득은 -2.36 dBi를 나타내었다.

• 한국인터넷방송통신학회논문지
• /
• 제23권6호
• /
• pp.41-46
• /
• 2023

본 논문에서는 W밴드 radial 전력 결합기용 TE10-TEM 모드 변환기에 대한 설계 방법을 제안하였다. 제안한 구조는 일반적으로 이용 가능한 핀을 이용하여 TEM 모드를 구현하도록 하였으며 2단의 임피던스 변환부 및 back-short 구조를 이용하여 TE10 모드에서 TEM 모드로 자연스럽게 변환되도록 설게 하였다. 제안한 모드 변환기의 핀 구조가 하우징에 접합되어 진동 및 충격의 환경이 성능에 영향 없도록 하였다. 제안한 구조의 back-to-back 특성은 92.5~97.7 GHz 대역에서 삽입손실 1.55 dB 이하 및 10 dB 이상의 반사손실을 가짐을 확인하였다. 제안한 모드 변환기를 이용하여 높은 출력 및 안정적인 환경조건을 요구하는 초소형 레이다 및 다양한 응용 분야에 적용이 가능하리라 판단된다.

• 수산경영론집
• /
• 제28권1호
• /
• pp.85-117
• /
• 1997

This paper is focused on management control system. From a management control perspective, strategies should be viewed as useful, but not absolutely necessary, guides to the proper design of an MCS. When strategies are formulated more clearly, more control alternatives become feasible and it becomes easier to implement each form of management control effectively. The common and important category of controls are action controls, personnel and cultural controls, and results controls. Action controls involves ensuring that employees perform(or do not perform) certain actions that are known to be beneficial(or harmful) to the organization. Personnel and cultural controls take steps to ensure that employees will control each others' behaviors. Results controls involve rewarding individuals(and sometimes groups of individuals) for generating good outcomes or punishing them for poor outcomes. The results controls of ROI-type measure cause to make managers excessively short- term oriented, or myopic. When managers' orientations to the short - term become excessive -when the management are more concerned with short-term profit than entity value-the managers are said to be myopic. We car, solve myopic problem by introducing AR(abnormal return), near-perfect indicators of value creation. The results - control ideal would be to hold all employees accountable for the wealth they individually create(or destroy) for the owners of the entities in which they work. This ideal is approachable for top management of publicly traded corporations because for these organizations, the wealth created(returns to shareholders) can be measured directly for any period(such as a year, a quarter, or a month) as the measurement period pin(or minus) the change in the market value of the stock.

• 소성∙가공
• /
• 제4권4호
• /
• pp.398-409
• /
• 1995

The wear properties of the alumina short fiber reinforced tin-bronze matrix composites manufactured by hot pressing was studied at the room temperature and $350^{\circ}C.$ The wear loss of various specimens having different constituent and different density was examined by a pin-on-disc type wear testing machine. The results were discussed by the observation of the worn surface morphology and the analysis of the composition on the worn surfaces. Since the reinforced effect of the alumina fiber on the wear resistance was dependent on the strength of alloy matrix, the pressureless sintered composites having a lower matrix strength showed a marked increase in wear resistance by the fiber reinforcement. As the wear condition became severe, the fiber reinforcement was more effective. The delamination on the wear surface was observed in the pressureless sintered specimens having pores which are related to the initiation and the propagation of cracks. However, the wear mechanism acting on a big failure area was not found on the wear surfaces of the hot pressed specimens having a few pores.

• 한국분무공학회지
• /
• 제21권3호
• /
• pp.155-161
• /
• 2016

Injected fuel pressure waves of a common rail injector with various current profiles supplied to the injecor were measured using Bosch method. In order to drive the common rail injector, the current in the solenoid should be controlled using what is known as a peak and hold pattern, which consists of a high current level with a short time duration (peak) in the first step and a low current level with a long time duration (hold) in the subsequent step. The current profile can be shaped by swithcing an injector driving power source with the peak and hold waves. The capture, compare and PWM (CCP) pin in the microprocessor was used to generate the combined peak and hold waves. The PWM square wave generated from the CCP pin has a duty ratio of 100% for the peak current and 10% or 30% for the hold pattern. Five patterns of the current profile were generated by combining the peak and hold wave. The common rail pressure is controlled at 75, 100, and 130 MPa. As the fuel rail pressure increases, the variations of the measured fuel injection pressure wave according to the current profiles decrease.

• 복식문화연구
• /
• 제11권5호
• /
• pp.767-777
• /
• 2003

This study defines attributes of the Korean costume culture, focussed on hair, shoes and accessories which express sex-roles, encapsulated in the term, “be like...”. A group of 362 male and female university students from Seoul and Gyeonggi area was surveyed for the study. The statistical analysis of SPSS 10.0 was applied for analyzing the data, and the significant variances were reviewed by the basic statistics and t-test. The results are as follows; First, short hair is perceived as the typical hair style that symbolizes male, both from male and female university students. Hair colors in warm color such as brown, wine, purple, lemon and orange, and the style of hair such as bobbed, long, and perm are perceived as definite clues that symbolized female. Second, when it concerns the types of shoes, both male and female university students cited oxford as the typical clue that symbolizes male, whereas pumps and sandal were cited for female. Third, in terms of types of accessories, both male and female university students perceived necklace, earring, bracelet, hair pin and band, scarf, and muffler as very feminine. Among these, hair pin and band, and scarf are evaluated as the typical clues that signify the role of females. Necktie is perceived as the typical clue that signify male role.

• 대한기계학회논문집A
• /
• 제25권6호
• /
• pp.930-937
• /
• 2001

The friction and wear behavior of short carbon fiber reinforced polyetheretherketone was studied experimentally under dry sliding conditions against SCM440(AISI 4140) disks with different surface roughness and hardness at the low sliding speeds and the high pressures on a pin-on-disk apparatus. Under the low disk surface roughness value the earsplitting noise and stick-slip were occurred. The increased adhesion friction and wear factor with stick-slip made the friction and wear behavior worse. Under the high disk surface hardness the break and falling-off of carbon fibers were accelerated. The carbon fibers fallen off from the matrix were ground into powder between two wear surfaces and this phenomenon caused abrasive friction and wear factor to increase. So the friction and wear behavior became worse. With the transfer film made of wear particles formed on a disk, the carbon powder film formed on a pin lowered a friction coefficient.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.322-330
• /
• 2014

New effective techniques to repair "small" design errors in integrated circuits are presented. As semiconductor chip complexity increases and the design period becomes tight, errors frequently remain in a fabricated chip making revisions required. Full mask revision significantly increases the cost and time-to-market. However, since many "small" errors can be repaired by modifying several connections among the circuit blocks and spare cells, errors can frequently be repaired by revising metal layers. Metal only revision takes significantly less time and involves less cost when compared to full mask revision, since mask revision costs multi-million dollars while metal revision costs tens of thousand dollars. In our research, new techniques are developed to further reduce the number of metal layers to be revised. Specifically, we partition the circuit blocks with higher error probabilities and extend the terminals of the signals crossing the partition boundaries to the preselected metal repair layers. Our partitioning and pin extension to repair layers can significantly improve the repairability by revising only the metal repair layers. Since pin extension may increase delay slightly, this method can be used for non-timing-critical parts of circuits. Experimental results by using academia and industrial circuits show that the revision of the two metal layers can repair many "small" errors at low-cost and with short revision time. On the average, when 11.64% of the spare cell area and 24.72% of the extended pins are added to the original circuits, 83.74% of the single errors (and 72.22% of the double errors) can be corrected by using two metal revision. We also suggest methods to use our repair techniques with normal commercial vender tools.

• 대한핵의학회지
• /
• 제19권1호
• /
• pp.73-75
• /
• 1985

Acute transient synovitis of the hip presents clinically pain and limping. But in the majority of the cases, definite positive findings are not manifest in roentgenogram in its early phase. However radionuclide bone imaging combines with the assessment of vascularization and bone tracer uptake is of great value in solving this diagnostic problem. The materials for this study consisted of 29 children with acute transient synovitis of the hip, characterized by symptoms and physical signs of an arthritis, negative X-ray findings and disappearance of all symptoms and signs within a short period of time. They were twenty males and 9 females and age ranged from 1 to 12 years. We took pelvic reontgenogram in AP and frog-leg views. After intravenous bolus injection of 10 to 15 mCi of $^{99m}Tc-methylene$ diphosphonate, 24 sequential image of the pelvis was taken at 2-second interval for blood flow study. The scintigrams were made using a gamma camera with high resolution parallel hole collimator. Blood pool imaging was obtained at 2 minutes after tracer administration. After 3 hours, static images were taken and then closeup image of the hip using pin-hole collimator was followed. The results were as follows: 1) Bone scintigram was much more sensitive than conventional roentgenogram in diagnosis of acute transient synovitis of the hip. 2) Three-phase imagings showed increased vascular activities in blood pool scintigrams in 96%. 3) Pin-hole imaging showed increased tracer uptake in the regional bones of the hip, par ticularly in the medial aspect of femoral head and acetabulum. 4) We confirmed that three-phase imaging reinforced with pin-hole technique were very useful in diagnose of acute transient synovitis of the hip.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.967-972
• /
• 2004

The role of transfer films formed during sliding of polymer composites against steel counterfaces was studied in terms of the tribological behaviors of composites. Four kinds of composites were included in this study: (1) unfilled PPS, (2) PPS+2%CuO, (3) PPS+2%CuO+5% carbon fiber (CF), and (4) PPS+2%CuO+15%Kevlar. The filler material CuO was in nanoscale particulate form and the reinforcing material was in the form of short fibers. The composites were prepared by compression molding at $310^{\circ}C$ and sliding tests were run in the pin-on-disk sliding configuration. The counterface was made of tool steel hardened to 55-60 HRC and finished to a surface roughness of 0.09-0.10 ${\mu}m$ Ra. Wear tests were run for 6 hrs at the sliding speed of 1 m/s and contact pressure of 0.65 MPa. Transfer films formed on the counterfaces during sliding were investigated using AFM and SEM. The results showed that as the transfer film became smooth and uniform, wear rate decreased. PPS+2%CuO+15%Kevlar composite showed the lowest steady state wear rate in this study and its transfer film showed the smoothest and the most uniform characteristics. The examination of worn surfaces of PPS+2%CuO composite using X-ray area scanning (dot mapping) showed back-transfer of steel counterface material to the polymer pin surface. This behavior is believed to strengthen the polymer pin surface during sliding thereby contributing to the decrease in wear rate.