• Asia Marketing Journal
• /
• 제12권2호
• /
• pp.111-133
• /
• 2010

투자상품의 확산, 고령화 등으로 인한 금융니즈 다양화와 자본시장법 시행으로 인한 금융회사간 치열한 경쟁으로 인해 금융산업 내에서 마케팅의 역할이 더욱 중요해지고 있다. 그러나, 지금까지 다른 산업에 비해 금융산업의 마케팅 연구는 상대적으로 부족하였다. 본 연구는 향후 구체적인 금융마케팅 연구들이 진행되기에 앞서 국내 금융마케팅 연구들을 정리하고, 국내 금융회사 마케팅 담당자를 In-depth 인터뷰하여 실제 국내 금융 마케팅 현황을 조사하였다. 이를 통해 향후 금융마케팅 연구에 필요한 시사점을 얻고자 하였다. 분석 결과, 다른 산업의 마케팅과 다른 금융 마케팅만의 고유 특징에 대한 이론적인 연구가 부족하였고, 금융산업 내에서 은행, 증권, 보험, 카드 산업 간의 마케팅 특징 차이에 대한 연구도 부족하였음을 알 수 있었다. 소비자행동 관점에서 금융고객의 의사결정 과정에 관한 연구도 부족하였다. 또한, 우리나라의 금융회사의 마케팅 현황은 외형적으로 어느 정도 성숙 단계에 접어들었다고 볼 수 있으나, 실제 업무는 여전히 과거의 영업지원, 혹은 프로모션 및 CRM 데이터 분석 등 단기적인 부분에 치중되어 있었다. 그리고, 은행, 증권, 보험, 카드 회사 등 각 세부 금융산업별 마케팅 담당자들이 중요하게 생각하는 금융마케팅의 키워드와 문제 인식 정도도 서로 다름을 알 수 있었다. 본 연구는 이러한 분석 결과를 바탕으로 향후 금융마케팅 연구를 위한 시사점과 함께 6가지의 연구명제를 제안하였다.

• 벤처혁신연구
• /
• 제5권3호
• /
• pp.57-70
• /
• 2022

현대의 산업자본주의는 근로의 제공과 임금의 수령이라는 관계가 사회를 규율하는 중요한 원리로 자리 잡고 있다. 근로계약에 따라 자신의 노동력에 대한 처분권을 사용자에게 맡기고 제공받는 임금은 직접적인 보상이 되고 있으며, 적절한 휴식의 보장으로 인간다운 삶의 보장과 재생산을 할 수 있어야 한다. 자유계약에 의한 근로관계의 구축은 근로자 보호에 문제점을 나타내고 있으며, 이에 따라 근로자에 대한 최소한의 권리로 근로시간의 최대치를 정하고 최소휴식의 기준을 설정·부여하고 있다. 근로시간의 단축은 근로자의 삶의 질이라는 측면에서 매우 중요하지만 효율적인 기업활동에 있어서도 중요한 문제이다. 우리나라는 2020년 기준 연간 근로시간이 1,908시간으로 장시간 근로를 하고 있으며, UN산하 자문기구인 지속가능발전해법네트워크(SDSN)가 조사한 행복지수에서 OECD 37개국 중에서 하위 3번째로 나타나고 있다. 이에 따라 근로시간 단축의 필요성은 인정되어, 2018년부터 1주의 최대 근로시간이 52시간으로 제한하고 있다. 이러한 상황에서 기업의 부가가치 창출력을 유지하고, 근로자의 다양한 니즈에 부응하기 위한 방안으로 법적으로 다양한 근로시간의 예외를 두고 있으며, 우리나라 근로기준법은 3개월 이내의 탄력적 근로시간제와 3개월을 초과하는 탄력적 근로시간제, 선택적 근로시간제와 근로시간의 연장을 허용하는 연장근로의 제한을 두어 이를 허용하고 있다. 하지만 2021년 개정된 탄력적 근로시간제를 적용하는 것과 최근 논의되고 있는 정산 단위기간의 확대에 대한 논의에서 탄력적 근로시간제의 문제점이 있어 이에 대한 개선이 필요하다. 따라서 본 논문은 탄력적 근로시간제의 문제점과 이에 때한 개선방안을 살펴보고자 한다. 탄력적 근로시간제는 미리정한 기준에 따라 특정일 또는 특정주에 법정근로시간을 초과하더라도 근로기준법에서 정하고 있는 근로시간에 위배되는 것이 아님과 동시에 초과한 연장근로에 대한 가산임금을 지급하지 않아도 되는 제도로 주로 계절별 시기별 업무량 편차가 심한 제조업, 판매서비스업, 연속사업이나 장기간 조업을 위한 전기·가스·수도, 운수업 등에 있어 교대근무형태로 유용하게 활용되고 있으며, 운용에 따라 보다 짧은 근무일 설정을 통한 휴일 확대 등 근로시간 단축의 방편으로 활용되기도 한다. 하지만 정산 단위기간을 확대할 경우 근로자가 수령할 수 있는 가산임금을 수령하지 못하게 되어 근로자에게 불리하다. 따라서 첫째, 현재 논의되고 있는 정산 단위기간 확대를 하려면 현행 기준에서 확대되는 기간에 대하여 추가임금 지급을 하도록 하여야 한다. 둘째, 탄력적 근로시간제의 개별근로자에 대한 적용을 개선하여 근로자대표와의 서면합의에 있어 개별근로자와 충분한 협의를 하도록 하는 조치가 필요하고, 셋째, 정산 단위기간 동안 연장 근로의 허용시간을 명확히 하여야 하며, 넷째, 1일 최대근로시간이 정해지지 않고 있어 근로시간의 한도를 최대 근로시간으로 제한하거나 연속휴식에 대한 적용이 필요하며, 추가적으로 근로자대표의 서면합의가 탄력적 근로시간제의 적용에 있어 중요한 문제이므로 근로자대표의 대표성을 확보하여야 할 것이다.

• 미술자료
• /
• 제104권
• /
• pp.102-142
• /
• 2023

보신각종은 호불군주 세조가 즉위 10년을 맞이하여 한양 도성 한복판에 원각사를 건립하면서 그곳에 봉안하고자 1468년에 조성한 범종(梵鐘)이었다. 현재 보신각종은 타종할 수 없을 정도로 많이 손상되었는데, 그것은 원각사종에서 보신각종으로의 역사적 변천을 잘 보여준다. 필자는 본고에서 보신각종에 가해진 인위적 훼손에 주목하여, 누가, 언제, 왜 훼손하였으며, 그 역사적 의미는 무엇인가를 살펴보았다. 먼저 제1장에서는 관련되는 선행 연구성과를 검토하여 필자의 문제의식과 연구 관점 및 방법론을 제시하였다. 특히 가장 주된 논점인 보신각종과 원각사종의 관계에 초점을 맞추어 학설사를 검토하여, '보신각종=원각사종'의 관점에서 필자가 논의를 전개함을 밝혔다. 이어서 제2장에서는 세조가 원각사종을 조성하게 된 배경을 검토하였다. 구체적으로 조선 초에 왕명으로 조성한 종들을 조종(朝鍾)과 범종(梵鐘)으로 나눈 다음, 조종 4구-태조의 종루종, 태종의 돈화문종, 세종의 광화문종, 세조의 사정전종-와, 범종 3구-세조의 용문사종, 흥천사종(또는 정릉사종) 및 원각사종-를 만든 시기순으로 정리하였다. 요컨대, 세조는 만년에 원각사종을 조성하면서, 거기에 한 마음으로 임금과 부처가 소리로써 백성을 교화하겠다는 의미를 부여하였던 것이다. 그리고 제3장에서는 보신각종에 보이는 인위적 훼손의 흔적을 면밀하게 고찰하였다. 먼저 보신 각종의 현상을 관찰한 다음, 이를 보신각종을 전후하여 조성한 흥천사종(1462) 및 봉선사종(1469)과 비교하여, 범종의 구성 요소 가운데 무엇이 얼마나 훼손되었는가를 추적하였다. 훼손된 구성 요소는 다시 불교적 요소-견대(肩帶)의 복련(伏蓮), 보살입상 4구, 최항(崔恒)이 지은 종명(鐘銘)-와, 비(非)불교적 요소-주종 관계자 가운데 도제조(都提調) 명단-로 나누어진다. 전자는 원각사종에서 불교 문자와 상징이 지워졌다는 점에 착안하여 이를 '불교지우기'라 명명하고 그 이념적 요인으로 동시대 유자(儒者)들의 맹렬한 벽불론(闢佛論)을 주목하였으며, 후자는 정치적 요인으로 연산군의 갑자사화를 지목하였다. 그리고 보신각종의 인위적 훼손에는 이념적 요인과 정치적 요인이 동시에 작용하였다는 점에서, 그 시기를 갑자사화(1504년)부터 연산군 퇴위까지로 추정하였다. 마지막으로 제4장에서는 범종으로서의 원각사종이 조종으로서의 보신각종으로 바뀌는 과정을 추적하고, 그 변신의 의미를 종소리의 상징성에 초점을 맞추어 음미하였다. 1468년 최종적으로 완성된 원각사종은 1504년까지 36년이라는 짧은 시간 동안만 예불(禮佛)을 위한 범종으로서 본연의 역할을 수행하였으며, 1504년 원각사가 폐사되면서 그 역할도 끝났다. 1536년에는 원각사지에서 남대문으로 옮겨졌으며, 1594년 11월 다시 타종할 때까지 전후 90년 동안 침묵 속에 방치되었다. 그런데 임진왜란 때의 병화로 종루종이 파괴되면서 원각사종은 조종으로 재탄생하였으며, 명동 고개를 거쳐 1619년 종루로 이전되었다. 이때부터 명실상부한 종루종[보신각종]으로서 1908년 일제가 타종을 중단시킬 때까지 300년 가까이 매일 새벽[파루(罷漏)]과 저녁[인정(人定)]마다 규칙적으로 타종되었다. 원각사종[범종]에서 보신각종[조종]으로의 변신은, 종소리가 상징하는 바가 부처의 소리에서 임금의 소리로 바뀌었음을 의미한다. 원각사종이 보신각종으로 바뀌는 과정에서 단적으로 드러난 '불교지우기'는, 조선 전시기에 걸쳐 불교의 거의 모든 분야에서 광범위하게 일어났다. 요컨대, 보신각종에서 확인되는 불교지우기야말로 조선시대 한국 사회의 탈불교화를 역설한다 하겠다.

• 대한의용생체공학회:의공학회지
• /
• 제6권2호
• /
• pp.1-8
• /
• 1985

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70$\pm$1.32mmHg/min)compared to CF dialyzers(4.32$\pm$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500, 550, 570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500, 550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100, 300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3, 000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.SpO2 with Plethysmograph.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 1993년도 한국우주과학회보 제2권2호
• /
• pp.17-17
• /
• 1993

The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70${\pm}$1.32mmHg/min)compared to CF dialyzers(4.32${\pm}$0.55mmHg/min)(p<0.05). However, there was no observable difference in the UFR between the two dialyzers. Neither APD nor UFR showed any significant increase with an increasing number of reuses for up to more than 20reuses. A substantial number of failures observed in APD(larger than 20mmHe/min)on the reused dialyzers(2 out of 40 CP and S out 26 C-DAK) were attributed to the Possible damage on the fibers. The CF 15-11 HFDs which failed APD test did not show changes in the UFR compared to normal dialyzers indicating that APD is a more sensitive test than UFR test to evaluate the integrity of the fibers. 30527 T00401030527 ^x For quantitative measurement of reflected light from a clinical diagnostic strip, a prototype old reflectance photometer was designed. The strip loader and cassette were made to obtain more accurate reflectance parameters. The strip was illuminated at 45˚c through optical fiber and the intensity of reflected light was determined at rectanguLat angle using a photodiode. The kubelka-munk coefficient and reflection optical density were determined ar four different wavelengths(500,550,570 and 610nm) for blood glucose strip. For higher concentration than 300mg/41 about glucose, a saturation state of abforbance was observed at 500,550 and 570nm. The correlation between glucose concentration and parameters was the best at 610nm. 30535 T00401030535 ^x Radiation-induced fibrosarcoma tumors were grown on the flanks of C3H mice. The mice were divided into two groups. One group was injected with Photofrin II, intravenously (2.5mg/kg body weight). The other group received no Photofrin II. Mice from both groups were irradialed for approximately 15 minutes at 100,300, or 500 mW/cm2 with the argon (488nm/514.5 nm), dye(628nm) and gold vapor (pulsed 628 nm) laser light. A photosensitizer behaved as an added absorber. Under our experimental conditions, the presence of Photolfrin II increased surface temperature by at least 40% and the temperature rise due to 300 mW/cm2 irradiation exceeded values for hyperthermia. Light and temperature distributions with depth were estimated by a computer model. The model demonstrated the influence of wavelength on the thermal process and proved to be a valuable tool to investigate internal temperature rise. 30536 T00401030536 ^x We investigated the structural geometry of thirty-eight Korean femurs. The purpose of this study is to identify major geometrical differences between Korean femurs 3nd others that we believe belong to Caucasians so that we would be able to get insights into the femoral component design that fits Asians including Koreans. We utilized computerized tomography (CT) images of femurs extracted from cadavers. The CT images were transformed into bitmap data by using a film scanner, and then analyzed by using a commercially available software called Image v.1.0 and a Macintosh IIci computer.The resulting data were compared with already published data. The major results show that the geometry of the Korean femurs is significantly different from that of Caucasians: (1) the anteversion angle and the canal flare index are greater by the amount of approximately 8˚ and 0.5, respectively, (2) the shape of the isthmus cross section is more round, and (3) the distance between the teaser trochanter and the proximal border of the isthmus is shelter by about 15 mm. The results suggested that the femoral component suitable for Asians should be different from the currently-used components designed and manufactured mostly by European or American companies. 30537 T00401030537 ^x It is well known that nonlinear propagation characteristics of the wave in the tissue may give very useful information for the medical diagnoisis. In this paper, a new method to detect nonlinear propagation characteristics of the internal vibration in the tissue for the low frequency mechanical vibration by using bispectral analysis is proposed. In the method, low frequency vibration of f0( = 100Hz) is applied on the surface of the object, and the waveform of the internal vibration x (t) is measured from Doppler frequency modulation of silmultaneously transmitted probing ultrasonic waves. Then, the bispectra of the signal x (t) at the frequencies (f0, f0) and (f0, 2f0) are calculated to estimate the nonlinear propagation characteristics as their magnitude ratio, w here since bispectrum is free from the gaussian additive noise we can get the value with high S/N. Basic experimental system is constructed by using 3.0 MHz probing ultrasonic waves and the several experiments are carried out for some phantoms. Results show the superiority of the proposed method to the conventional method using power spectrum and also its usefulness for the tissue characterization. 30541 T00401030541 ^x This paper describes the implementation of a computerized radial pulse diagnosis by aids of a clinical expert. On this base, we composed of the radial pulse diagnosis system in korean traditional medicine. The system composed of a radial pulse wave detection system and a radial pulse diagnosis system. With a detection system, we detected Inyoung and Cheongu radial pulse wave and processed it. Then, we have got the characteristic parameters of radial pulse wave and also quantified that according to the method of Inyoung-Cheongu Comparison Radial Pulse Diagnosis. We defined the jugement standard of radial pulse diagnosis system and then we confirmed the possibility for realization of automatic radial pulse diagnosis in korean traditional medicine. 30545 T00401030545 ^x Microspheres are expected to be applied to biomedical areas such as solid-phase immunoassays, drug delivery systems, immunomagnetic cell separation. To synthesize microspheres for biomedical application, "two stage shot growth method" was developed. The uniformity ratio of synthesized microspheres was always smaller than 1.05. And the surface charge density (or the number of ionizable functional groups) of the microspheres synthesized by "two stage shot growth method" was 6~13 times higher than that of the microspheres synthesized by conventional seeded batch copolymerization. As a previous step for biomedical application, adsorption experiments of bovine albumin on microspheres were carried out under various conditions. The maximum adsorbed amount was obtained in the neighborhood of pH 4.5. Isoelectric point of bovine albumin is pH 5.0, so experimental result shows that it shifted to acid area. The adsorption isotherm was obtained, the plateau region was always reached at 2.Og/L (bulk concentration of bovine albumin).The effect of the kind and the amount of surface functional group was also examined. 30575 T00401030575 ^x A medical image workstation was developed using multimedia technique. The system based on PC-486DX was designed to acquire medical images produced by medical imaging instruments and related audio information, that is, doctors' reporting results. Input information was processed and analyzed, then the results were presented in the form of graph and animation. All the informations of the system were hierarchically related with the image as the apex. Processing and analysis algorithms were implemented so that the diagnostic accuracy could be improved. The diagnosed information can be transferred for patient diagnosis through LAN(local area network). 30592 T00401030592 ^x In the conventional infrared imaging system, complex infrared lens systems are usually used for directing collimated narrow infrared beams into the high speed 2-dimensional optic scanner. In this paper, a simple reflective infrared optic system with a 2-dimensional optic scanner is proposed for the realization of medical infrared thermography system. It has been experimentally proven that the intfrared thermography system composed of the proposed optic system has the temperature resolution of 0.1˚c under the spatial resolution of lmrad, the image matrix size of 256 X 240, and tile imaging time of 4 seconds. 30593 T00401030593 ^x In this paper, MIIS (Medical Image Information System) has been designed and implemented using INGRES RDBMS, which is based on a client/server architecture. The implemented system allows users to register and retrieve patient information, medical images and diagnostic reports. It also provides the function to display these information on workstation windows simultaneously by using the designed menu-driven graphic user interface. The medical image compression/decompression techniques are implemented and integrated into the medical image database system for the efficient data storage and the fast access through the network. 30594 T00401030594 ^x In this paper, computerized BEAM was implemented for the space domain analysis of EEG. Trans-formation from temporal summation to two-dimensional mappings is formed by 4 nearest point inter-polaton method. Methods of representation of BEAM are two. One is dot density method which classify brain electrical potential 9 levels by dot density of gray levels and the other is colour method which classify brain electrical 12 levels by red-green colours. In this BEAM, instantaneous change and average energy distribution over any arbitrary time interval of brain electrical activity could be observed and analyzed easily. In the frequency domain, the distribution of energy spectrum of a special band can easily be distinguished normality and abnormality. 30608 T00401030608 ^x Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer. The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with fwd complete blood count analyzers(Sysmex NE-8000 and Coulter STKS) for unidirectional data tansmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology. 30609 T00401030609 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed a composite that is consisted of calcium phosphate and collagen. To use as the structural matrix of the composite, collagen was purified from human umbilical cord. The obtained collagen was treated by pepsin to remove telopeptides, and finally, the immune-free atelocollagen was produced: The cross linked atelocollagen was highly resistant to the collagenase induced collagenolysis. The cross linked collagen demonstrated an improved tensile strength. 30618 T00401030618 ^x This paper is a study on the design of adptive filter for QRS complex detection. We propose a simple adaptive algorithm to increase capability of noise cancelation in QRS complex detection with two stage adaptive filter. At the first stage, background noise is removed and at the next stage, only spectrum of QRS complex components is passed. Two adaptive filters can afford to keep track of the changes of both noise and QRS complex. Each adaptive filter consists of prediction error filter and FIR filter The impulse response of FIR filter uses coefficients of prediction error filter. The detection rates for 105 and 108 of MIT/BIH data base were 99.3% and 97.4% respectively. 30619 T00401030619 ^x To develop an artificial bone substitute that is gradually degraded and replaced by the regenerated natural bone, the authors designed and produced a composite that is consisted of calcium phosphate and collagen. Human umbilical cord origin pepsin treated type I atelocollagen was used as the structural matrix, by which sintered or non-sintered carbonate apatite was encapsulated to form an inorganic-organic composite. With cross linking atelocollagen by UV ray irradiation, the resistance to both compressive and tensile strength was increased. Collagen degradation by the collagenase induced collagenolysis was also decreased. 30620 T00401030620 ^x We have developed a monoleaflet polymer valve as an inexpensive and viable alternative, especially for short-term use in the ventricular assist device or total artificial heart. The frame and leaflet of the polymer valve were made from polyurethane, To evaluate the hemodynamic performance of the polymer valve a comparative study of flow dynamics past a polymer valve and a St. Jude Medical prosthetic valve under physiological pulsatile flow conditions in vitro was made. Comparisons between the valves were made on the transvalvular pressure drop, regurgitation volume and maximum valve opening area. The polymer valve showed smaller regurgitation volume and transvalvular pressure drop compared to the mechanical valve at higher heart rate. The results showed that the functional characteristics of the polymer valve compared favorably with those of the mechanical valve at higher heart rate. 30621 T00401030621 ^x Explosive evaporative removal process of biological tissue by absorption of a CW laser has been simulated by using gelatin and a multimode Nd:YAG laser. Because the point of maximun temperature of laser-irradiated gelatin exists below the surface due to surface cooling, evaporation at the boiling temperature is made explosively from below the surface. The important parameters of this process are the conduction loss to laser power absorption (defined as the conduction-to-laser power parameter, Nk), the convection heat transfer at the surface to conduction loss (defined as Bi), dimensionless extinction coefficient (defined as Br.), and dimensionless irradiation time (defined as Fo). Dependence of Fo on Nk and Bi has been observed by experiment, and the results have been compared with the numerical results obtained by solving a 2-dimensional conduction equation. Fo and explosion depth (from the surface to the point of maximun temperature) are increased when Nk and Bi are increased.To find out the minimum laser power for explosive evaporative removal process, steady state analysis has been also made. The limit of Nk to induce evaporative removal, which is proportional to the inverse of the laser power, has been obtained. 30622 T00401030622 ^x N1 and N2 gross neural action potentials were measured from the round window of the guinea pig cochlea at the onset of the acoustic stimuli. N1-N2 audiograms were made by means of regulating stimulant intensities in order to produce constant N1-N2 potentials as criteria for different input tone pip frequencies. The lowest threshold was measured with an input tone pip I5 dB SPL in intensity and 12 KHz in frequency when the animal was in normal physiological condition. The procedure of experimental measurements is explained in detail. This experimental approach is very useful for the investigation of the Cochlear function. Both noN1inear and active functions of the Cochlea can be monitored by N1-N2 audiograms. 30623 T00401030623 ^x In electrical impedance tomography(EIT), we use boundary current and voltage measurements toprovide the information about the cross-sectional distribution of electrical impedance or resistivity. One of the major problems in EIT has been the inaccessibility of internal voltage or current data in finding the internal impedance values. We propose a new image reconstruction method using internal current density data measured by NMR. We obtained a two-dimensional current density distribution within a phantom by processing the real and imaginary MR images from a 4.77 NMR machine. We implemented a resistivity mage reconstruction algorithm using the finite element method and sensitivity matrix. We presented computer simulation results of the mage reconstruction algorithm and furture direction of the research. 30624 T00401030624 ^x A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid eland cells image that was diagnosed as normal and abnormal (two types of abnormal: follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. A9 a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11% was obtained for Thyroid Gland cells. 30625 T00401030625 ^x An electrical stimulator was designed to induce locomotion for paraplegic patients caused by central nervous system injury. Optimal stimulus parameters, which can minimize muscle fatigue and can achieve effective muscle contraction were determined in slow and fast muscles in Sprague-Dawley rats. Stimulus patterns of our stimulator were designed to simulate electromyographic activity monitored during locomotion of normal subjects. Muscle types of the lower extremity were classified according to their mechanical property of contraction, which are slow muscle (msoleus m.) and fast muscle (medial gastrocneminus m., rectus femoris m., vastus lateralis m.). Optimal parameters of electrical stimulation for slow muscles were 20 Hz, 0.2 ms square pulse. For fast muscle, 40 Hz, 0.3 ms square pulse was optimal to produce repeated contraction. Higher stimulus intensity was required when synergistic muscles were stimulated simultaneously than when they were stimulated individually. Electrical stimulation for each muscle was designed to generate bipedal locomotion, so that individual muscles alternate contraction and relaxation to simulate stance and swing phases. Portable electrical stimulator with 16 channels built in microprocessor was constructed and applied to paraplegic patients due to lumbar cord injury. The electrical stimulator restored partially gait function in paraplegic patients. 30626 T00401030626 ^x Two-Dimensional modelling of the Cochlear biomechanics is presented in this paper. The Laplace partial differential equation which represents the fluid mechanics of the Cochlea has been transformed into two-dimensional electrical transmission line. The procedure of this transformation is explained in detail. The comparison between one and two dimensional models is also presented. This electrical modelling of the basilar membrane (BM) is clearly useful for the next approach to the further. Development of active elements which are essential in the producing of the sharp tuning of the BM. This paper shows that two-dimension model is qualitatively better than one-dimensional model both in amplitude and phase responses of the BM displacement. The present model is only for frequency response. However because the model is electrical, the two-dimensional transmission line model can be extended to time response without any difficult. 30627 T00401030627 ^x A method has been proposed for the fully automatic detection of left ventricular endocardial boundary in 2D short axis echocardiogram using geometric model. The procedure has the following three distinct stages. First, the initial center is estimated by the initial center estimation algorithm which is applied to decimated image. Second, the center estimation algorithm is applied to original image and then best-fit elliptic model estimation is processed. Third, best-fit boundary is detected by the cost function which is based on the best-fit elliptic model. The proposed method shows effective result without manual intervention by a human operator. 30628 T00401030628 ^x The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMf signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements. 30638 T00401030638 ^x A new neural network architecture for the recognition of patterns from images is proposed, which is partially based on the results of physiological studies. The proposed network is composed of multi-layers and the nerve cells in each layer are connected by spatial filters which approximate receptive fields in optic nerve fields. In the proposed method, patterns recognition for complicated images is carried out using global features as well as local features such as lines and end-points. A new generating method of matched filers representing global features is proposed in this network. 30659 T00401030659 ^x An implementation scheme of the magnetic nerve stimulator using a switching mode power supply is proposed. By using a switching mode power supply rather than a conventional linear power supply for charging high voltage capacitors, the weight and size of the magnetic nerve stimulator can be considerably reduced. Maximum output voltage of the developed magnetic nerve stimulator using the switching mode power supply is 3,000 volts and switching time is about 100 msec. Experimental results or human nerve stimulations using the developed stimulator are presented. 30768 T00401030768 ^x In this paper, we describe the design methodology and specifications of the developed module-based bedside monitors for patient monitoring. The bedside monitor consists of a main unit and module cases with various parameter modules. The main unit includes a 12.1" TFT color LCD, a main CPU board, and peripherals such as a module controller, Ethernet LAN card, video card, rotate/push button controller, etc. The main unit can connect at maximum three module cases each of which can accommodate up to 7 parameter modules. They include the modules for electrocardiograph, respiration, invasive blood pressure, noninvasive blood pressure, temperature, and SpO2 with Plethysmograph.

• 마케팅과학연구
• /
• 제19권3호
• /
• pp.17-27
• /
• 2009

典型的价格促销是指降低一定数量产品的价格或以相同的价 格获得更多数量的产品, 从而增加价值和创造经济的激励购买. 价格促销经常用来鼓励没有消费过产品或服务的用户试用产品或服务. 因此, 理解价格促销对那些从来没有使用过促销品牌的消费者的此品牌质量认知的影响是很重要的. 然而, 如果消费者通过价格促销获得的产品的质量不好, 促销可能达不到用经济的刺激方法来增加销售的效果. 相反则有可能发生. 具体来说, 通过价格促销消费者产生低的质量的认知会削弱经济的和心理上的激励, 减少购买的可能性. 因此, 对市场营销人员来说理解品牌的价格促销信息如何影响消费者对此品牌的质量的不良认知是非常重要的. 先前的有关价格促销对质量认知的影响的研究有不一致的解释. 一些是关注价格促销对消费者认知的不利影响. 但是其他的研究显示价格促销并没有提高消费者对品牌的不良认知. 之前的研究发现这些不一致的结果和价格促销曝光的时机以及相关的试验得出的质量评估有关. 而且, 消费者是否经历过产品促销都可能会调节这些影响. 一些研究把产品类别的不同作为基本的因素. 本研究的目的是探讨在不同的情况下, 价格促销信息对消费者的不良的质量认知产生的影响. 作者控制了促销曝光的时机, 过去的各种促销形式以及信息发布的方式. 与以往的研究不同, 作者通过控制以前个人使用此产品的经验的潜在调节作用来测试事先设定限制的价格促销的影响. 这样的操作可以解决相关的有可能产生的争议. 这种方法对实际工作方面也是有意义的. 价格促销不仅适用于已存在的目标消费者, 而且可以鼓励没有使用过产品和服务的消费者尝试此产品或服务. 因此, 对市场营销人员来说理解品牌的价格促销信息如何影响消费者对此品牌的质量的不良认知是非常重要的. 如果没有使用过这个品牌的消费者通过价格促销获得的产品的质量不好, 促销可能达不到用经济的刺激方法来增加销售的效果. 相反则有可能发生. 另外, 如果价格促销结束, 购买了这个产品的消费者可能会出现明显的减少再购买行为. 通过文献回顾, 假设1用来探讨消费者通过过去的价格促销获得的质量认知的调节作用. 消费者对没有使用过的品牌的价格促销而产生的质量认知的影响会被此品牌过去的价格促销活动所调节. 换句话说, 消费者会对没有进行过价格促销的没有使用过的品牌产生不良的质量认知. 假设2-1:未使用过的品牌进行首次价格促销的时候, 价格促销的信息发布的方式将影响价格促销的成败. 假设2-2:消费者越不在意价格促销的原因, 越容易对产品的质量产生不良的认知. 通过测试1, 简要地解释了产品和品牌在提供四种价格促销形式之前并解释说明了每种价格促销形式. WAVEX这个虚拟品牌的质量的认知被评估为7. 网球拍被选中的原因是由于选定的产品组必须过去几乎没有价格促销活动来消除促销的平均次数对价格促销信息的影响, 正如Raghubir和Corfman(1999)所提出的. 测试2也用网球拍作为产品组, 主持测试2的管理者与测试1相同. 随着测试1, 选择了对产品组熟悉而对产品不熟悉的受访者. 每个受访者被分配到代表WAVEX价格促销的两种不同信息发布方式的两组中的一组. 在评估WAVEX的质量认知为7以前, 受访者看了每个促销信息. 不熟悉的实验品牌的价格促销对消费者的质量认知的影响被证明为会被以前有过或没有价格促销活动所调节. 与过去的促销行为一致是使品牌评估变得更糟的不良影响的重要变量. 如果此品牌从未进行过价格促销, 价格促销活动会对消费者的质量认知产生不良的影响. 第二, 不熟悉的品牌进行首次价格促销时, 促销信息的发布方式会影响公司促销的成败. 当消费者进行性格归因和情境归因的比较时, 质量认知的不良影响会更大. 与先前主要关注具有或不具有情境/性格归因中良好或不良的动机的研究不同, 本研究的焦点是检验如果公司提出了具有说服性的理由, 即使消费者在价格促销行为中有性格归因, 情境归因也可以被推断出的事实. 这种方法, 在学术方面取得了很大的成果, 意义在于它运用非数学的问题来解释固定和调整过程而不像以前的研究大部分是把它用于数学问题来解释. 换句话说, 根据基本属性错误, 有很大的倾向去性格地归因其他的行为. 当这种情况出现在价格促销时, 我们可以推断出消费者很有可能性格地归因公司的价格促销行为. 反而, 即使在这种情况下, 公司可以调整消费者的锚定性来降低性格归因的可能性. 另外, 不像多数对价格促销的长/短期影响的以往的研究, 只考虑价格促销对消费者的购买行为影响, 本 研究测试对质量认知的影响, 一个影响消费者购买行为的因素. 这些结果在实际工作方面有重要启示. 本研究的结果可以作为新产品有效的提供促销信息的指南. 如果品牌要避免错误的暗示, 比如在施行价格促销战略时被认为是产品的质量不好, 一定要为促销提供清晰合理的理由. 尤其是对那些以前没有进行过价格促销活动的公司来说, 提供明确的理由尤其重要. 不一致的行为可以导致消费者的不信任和焦虑. 这也是无止境的价格战的风险的重要因素之一. 没有事先通知的价格促销会使消费者怀疑, 但不会影响市场份额.

• 마케팅과학연구
• /
• 제18권3호
• /
• pp.59-88
• /
• 2008

Digital Convergence means integration between industry, technology, and contents, and in marketing, it usually comes with creation of new types of product and service under the base of digital technology as digitalization progress in electro-communication industries including telecommunication, home appliance, and computer industries. One can see digital convergence not only in instruments such as PC, AV appliances, cellular phone, but also in contents, network, service that are required in production, modification, distribution, re-production of information. Convergence in contents started around 1990. Convergence in network and service begins as broadcasting and telecommunication integrates and DMB(digital multimedia broadcasting), born in May, 2005 is the symbolic icon in this trend. There are some positive and negative expectations about DMB. The reason why two opposite expectations exist is that DMB does not come out from customer's need but from technology development. Therefore, customers might have hard time to interpret the real meaning of DMB. Time is quite critical to a high tech product, like DMB because another product with same function from different technology can replace the existing product within short period of time. If DMB does not positioning well to customer's mind quickly, another products like Wibro, IPTV, or HSPDA could replace it before it even spreads out. Therefore, positioning strategy is critical for success of DMB product. To make correct positioning strategy, one needs to understand how consumer interprets DMB and how consumer's interpretation can be changed via communication strategy. In this study, we try to investigate how consumer perceives a new product, like DMB and how AD strategy change consumer's perception. More specifically, the paper segment consumers into sub-groups based on their DMB perceptions and compare their characteristics in order to understand how they perceive DMB. And, expose them different printed ADs that have messages guiding consumer think DMB in specific ways, either cellular phone or personal TV. Research Question 1: Segment consumers according to perceptions about DMB and compare characteristics of segmentations. Research Question 2: Compare perceptions about DMB after AD that induces categorization of DMB in direction for each segment. If one understand and predict a direction in which consumer perceive a new product, firm can select target customers easily. We segment consumers according to their perception and analyze characteristics in order to find some variables that can influence perceptions, like prior experience, usage, or habit. And then, marketing people can use this variables to identify target customers and predict their perceptions. If one knows how customer's perception is changed via AD message, communication strategy could be constructed properly. Specially, information from segmented customers helps to develop efficient AD strategy for segment who has prior perception. Research framework consists of two measurements and one treatment, O1 X O2. First observation is for collecting information about consumer's perception and their characteristics. Based on first observation, the paper segment consumers into two groups, one group perceives DMB similar to Cellular phone and the other group perceives DMB similar to TV. And compare characteristics of two segments in order to find reason why they perceive DMB differently. Next, we expose two kinds of AD to subjects. One AD describes DMB as Cellular phone and the other Ad describes DMB as personal TV. When two ADs are exposed to subjects, consumers don't know their prior perception of DMB, in other words, which subject belongs 'similar-to-Cellular phone' segment or 'similar-to-TV' segment? However, we analyze the AD's effect differently for each segment. In research design, final observation is for investigating AD effect. Perception before AD is compared with perception after AD. Comparisons are made for each segment and for each AD. For the segment who perceives DMB similar to TV, AD that describes DMB as cellular phone could change the prior perception. And AD that describes DMB as personal TV, could enforce the prior perception. For data collection, subjects are selected from undergraduate students because they have basic knowledge about most digital equipments and have open attitude about a new product and media. Total number of subjects is 240. In order to measure perception about DMB, we use indirect measurement, comparison with other similar digital products. To select similar digital products, we pre-survey students and then finally select PDA, Car-TV, Cellular Phone, MP3 player, TV, and PSP. Quasi experiment is done at several classes under instructor's allowance. After brief introduction, prior knowledge, awareness, and usage about DMB as well as other digital instruments is asked and their similarities and perceived characteristics are measured. And then, two kinds of manipulated color-printed AD are distributed and similarities and perceived characteristics for DMB are re-measured. Finally purchase intension, AD attitude, manipulation check, and demographic variables are asked. Subjects are given small gift for participation. Stimuli are color-printed advertising. Their actual size is A4 and made after several pre-test from AD professionals and students. As results, consumers are segmented into two subgroups based on their perceptions of DMB. Similarity measure between DMB and cellular phone and similarity measure between DMB and TV are used to classify consumers. If subject whose first measure is less than the second measure, she is classified into segment A and segment A is characterized as they perceive DMB like TV. Otherwise, they are classified as segment B, who perceives DMB like cellular phone. Discriminant analysis on these groups with their characteristics of usage and attitude shows that Segment A knows much about DMB and uses a lot of digital instrument. Segment B, who thinks DMB as cellular phone doesn't know well about DMB and not familiar with other digital instruments. So, consumers with higher knowledge perceive DMB similar to TV because launching DMB advertising lead consumer think DMB as TV. Consumers with less interest on digital products don't know well about DMB AD and then think DMB as cellular phone. In order to investigate perceptions of DMB as well as other digital instruments, we apply Proxscal analysis, Multidimensional Scaling technique at SPSS statistical package. At first step, subjects are presented 21 pairs of 7 digital instruments and evaluate similarity judgments on 7 point scale. And for each segment, their similarity judgments are averaged and similarity matrix is made. Secondly, Proxscal analysis of segment A and B are done. At third stage, get similarity judgment between DMB and other digital instruments after AD exposure. Lastly, similarity judgments of group A-1, A-2, B-1, and B-2 are named as 'after DMB' and put them into matrix made at the first stage. Then apply Proxscal analysis on these matrixes and check the positional difference of DMB and after DMB. The results show that map of segment A, who perceives DMB similar as TV, shows that DMB position closer to TV than to Cellular phone as expected. Map of segment B, who perceive DMB similar as cellular phone shows that DMB position closer to Cellular phone than to TV as expected. Stress value and R-square is acceptable. And, change results after stimuli, manipulated Advertising show that AD makes DMB perception bent toward Cellular phone when Cellular phone-like AD is exposed, and that DMB positioning move towards Car-TV which is more personalized one when TV-like AD is exposed. It is true for both segment, A and B, consistently. Furthermore, the paper apply correspondence analysis to the same data and find almost the same results. The paper answers two main research questions. The first one is that perception about a new product is made mainly from prior experience. And the second one is that AD is effective in changing and enforcing perception. In addition to above, we extend perception change to purchase intention. Purchase intention is high when AD enforces original perception. AD that shows DMB like TV makes worst intention. This paper has limitations and issues to be pursed in near future. Methodologically, current methodology can't provide statistical test on the perceptual change, since classical MDS models, like Proxscal and correspondence analysis are not probability models. So, a new probability MDS model for testing hypothesis about configuration needs to be developed. Next, advertising message needs to be developed more rigorously from theoretical and managerial perspective. Also experimental procedure could be improved for more realistic data collection. For example, web-based experiment and real product stimuli and multimedia presentation could be employed. Or, one can display products together in simulated shop. In addition, demand and social desirability threats of internal validity could influence on the results. In order to handle the threats, results of the model-intended advertising and other "pseudo" advertising could be compared. Furthermore, one can try various level of innovativeness in order to check whether it make any different results (cf. Moon 2006). In addition, if one can create hypothetical product that is really innovative and new for research, it helps to make a vacant impression status and then to study how to form impression in more rigorous way.

• 마케팅과학연구
• /
• 제17권4호
• /
• pp.247-269
• /
• 2007

현대에 있어 동질적인 품질과 편익을 제공하는 제품을 가지고 다수의 기업들이 시장점유율 증대와 고객확보를 위하여 치열한 경쟁을 벌이고 있는 가운데 가격할인은 기업이 즐겨 사용하는 촉진수단이다. 가격할인은 단기적 매출향상, 소비자의 브랜드전환, 신제품의 시장침투 등의 목적을 달성하기 위하여 사용된다. 실제로 과거의 실증연구에 의하면 다양한 형태의 가격할인이 판매증대에 효과적이며 가격할인은 소비자의 지각가치를 증가시킨다고 하였다. 하지만 할인된 가격은 제품의 품질을 의심하게 하거나 낮게 평가하는 부정적인 효과가 있다는 사실이 밝혀졌으며, 모든 제품카테고리와 모든 구매상황에 대하여 가격할인이 소비자의 지각가치를 향상시킨다고 볼 수 없다. 이에 따라 본 연구에서는 브랜드애호도의 차이가 있는 제품을 대상으로 가격할인율에 따라 소비자의 지각가치에 어떠한 영향을 미치는지를 연구함으로서 브랜드애호도의 조절효과를 분석하였다. 브랜드애호도가 강한 제품에 대한 지각획득가치와 지각거래가치는 가격할인율이 낮을 때 보다 큰 경우에 증가할 것으로 예측하였으나 분석결과 유의적인 차이가 없는 것으로 나타났는데, 이것은 브랜드애호도가 강한 경우에는 가격할인에 의한 지각희생의 감소량이 크지 않았고 브랜드 자체에 대한 신뢰도와 속성에 대한 만족도가 높기 때문에 가격인하가 브랜드선택에 큰 영향을 미치지 않았다는 것을 의미한다고 할 수 있다. 반면 브랜드애호도가 약한 제품에 대한 지각획득가치와 지각거래가치는 가격할인율이 낮을 때 보다 큰 경우에 감소한 것으로 나타났다. 이는 브랜드애호도가 약한 경우에는 제품으로부터 획득하게 되는 편익에 대한 만족도와 신뢰도가 낮은데 이러한 특성을 고려해보면 가격할인이 클 때에 제품의 품질과 편익을 더욱 평가절하하거나 심리적으로 지각희생의 크기가 증가됨에 따라 지각가치가 감소되었음을 의미한다고 할 수 있다.

• Current Research on Agriculture and Life Sciences
• /
• 제6권
• /
• pp.49-69
• /
• 1988

마늘의 단경기(端境期)인 3~4월(月)에 수확(收穫)할 수 있는 작형개발(作型開發)의 기술체계(技術體系)를 확립(確立)할 목적(目的)으로 난지계(暖地系)인 남해지방종(南海地方種)과 한지계(寒地系)인 의성지방종(義城地方種)을 공시(供試)하여 파종기별(播種期別)로 저온처리개시기(低溫處理開始期) 및 저온처리기간(低溫處理期間)을 달리하여 숙기(熟期)를 포함(包含)하는 몇가지 생육상태(生育狀態) 및 수량(收量)에 미치는 영향(影響)에 대(對)해서 시험(試驗)을 실시(實施)하였던 바 그 결과(結果)는 다음과 같다. 1. 맹아(萌芽)가 촉진(促進)되는 정도(程度)는 난지계(暖地系)의 경우 9월(月) 14일(日)과 9월(月) 29일(日) 파종(播種)에서 저온처리(低溫處理)의 효과(效果)가 높고, 맹아소요일수(萌芽所要日數)는 9월(月) 14일(日) 파종(播種)에서 30일간(日間) 저온처리(低溫處理), 9월(月) 29일(日) 파종(播種)에서 45일간(日間) 저온처리(低溫處理)를 할 경우 가장 짧았다. 저온처리개시일(低溫處理開始日)로 보면 7월(月) 31일(日) 이전(以前)과 8월(月) 15일(日) 이후(以後)에 저온처리(低溫處理)한 것에는 현저(顯著)한 차이(差異)를 보였는데 그 중 8월(月) 15일(日)~8월(月) 30일(日)에 45일간(日間) 저온처리(低溫處理)한 것이 맹아(萌芽)가 가장 빨랐다. 한지계(寒地系)에서는 9월(月) 29일(日)에서 11월(月) 13일(日) 파종(播種)까지는 저온처리(低溫處理)에 의(依)해서 촉진(促進)되었고 저온처리기간(低溫處理期間)은 60일간(日間) 저온처리(低溫處理)가 가장 효과적(效果的)이었다. 2. 파종기별(播種期別) 저온처리(低溫處理)에 의(依)한 초기생장(初期生長)의 효과(效果)는 9월(月) 14일(日)과 9월(月) 29일(日)에서 현저(顯著)하였고 중기이후(中期以後) 생장효과(生長效果)는 10월(月) 29일(日) 파종(播種)까지 나타났다. 또한 생장(生長)을 촉진(促進)시키는 저온처리기간(低溫處理期間)에 있어서 난지계(暖地系)는 45일(日)과 60일(日), 한지계(寒地系)는 60일간(日間) 저온처리(低溫處理)였다. 전개엽수(展開葉數)는 저온처리기간(低溫處理期間)이 길고 파종기(播種期)가 늦어질수록 적어지는 경향(傾向)이었다. 3. 인편분화기(鱗片分化期)와 구비대기(球肥大期)에 있어서 저온효과(低溫效果)가 가장 큰 것은 난지계(暖地系)는 7월(月) 31일(日)~8월(月) 15일(日)에 저온개시(低溫開始)하여 45일(日)과 60일간(日間) 처리(處理)로 9월(月) 14일(日), 9월(月) 29일(日), 10월(月) 14일(日)에 파종(播種)한 구(區)였다. 한지계(寒地系)에 있어서는 8월(月) 15일(日)에 저온(低溫) 개시(開始)하여 60일간(日間) 처리(處理)로 10월(月) 14일(日)에 파종(播種)한 구(區)였으며 그 이후(以後) 저온개시(低溫開始)한 것은 난(暖), 한지계(寒地系) 다같이 저온처리기간(低溫處理期間)이 길수록 빨랐다. 4. 추태(抽苔)에 있어서 난지계(暖地系)는 저온개시일(低溫開始日)이 빠르고 저온처리기간(低溫處理期間)이 길수록 빨랐으며 한지계(寒地系)는 8월(月) 15일(日)~8월(月) 30일(日)에 저온처리(低溫處理)를 개시(開始)하여 45일(日)과 60일간(日間) 저온처리(低溫處理)한 것이 빨랐고 그 이후(以後)는 저온처리기간(低溫處理期間)이 길수록 빨랐다. 이차생장(二次生長)은 난(暖), 한지계(寒地系) 다같이 파종기(播種期)가 빠르고 저온처리기간(低溫處理期間)이 길수록 많았다. 5. 수확기(收穫期)에 있어서 난지계(暖地系)는 7월(月) 31일(日)부터 8월(月) 30일(日)까지에 저온개시(低溫開始)한 45일(日)과 60일간(日間) 저온처리(低溫處理)가 빨랐고 한지계(寒地系)에 있어서는 7월(月) 31일(日)부터 8월(月) 30일(日)까지에 저온개시(低溫開始)하여 60일(日)과 90일간(日間) 저온처리(低溫處理)가 빨랐다. 6. 구중(球重)이 큰 순위(順位)는 난지계(暖地系)에서는 10월(月) 14일(日) 파종(播種)의 45일간(日間) 저온처리(低溫處理)가 가장 많았고, 다음은 9월(月) 29일(日) 파종(播種)의 45일간(日間) 저온처리(低溫處理)였다. 한지계(寒地系)에서는 10월(月) 14일(日) 파종(播種)의 60일간(日間) 저온처리(低溫處理)가 가장 많았고, 다음은 10월(月) 14일(日) 파종(播種)의 45일간(日間) 저온처리(低溫處理)였다. 구중(球重)을 저온개시일(低溫開始日)로 보면 난지계(暖地系)는 8월(月) 30일(日)에 저온개시(低溫開始)하여 45일간(日間) 저온처리(低溫處理)가, 한지계(寒地系)는 8월(月) 15일(日)에 저온개시(低溫開始)하여 60일간(日間) 저온처리(低溫處理)가 가장 많았다. 7. 수확일수(收穫日數)와 1월(月) 12일(日)의 초장(草長)과는 부(負)의 상관(相關)을, 인편분화일수(鱗片分化日數)와는 높은 정(正)의 상관(相關)을 나타냈는데 발육(發育)이 촉진(促進)되고 인편분화(鱗片分化)가 빠른 것이 수확일(收穫日)이 빨랐다. 구중(球重)과 초장(草長)과는 높은 정(正)의 상관(相關)을 나타내어 생육(生育)이 빠를수록 구중(球重)도 증가(增加)하였다. 구중(球重)과 인편분화일수(鱗片分化日數), 구(球) 비대일수(肥大日數), 수확일수(收穫日數)는 높은 부(負)의 상관(相關)을 나타내어 인편분화(鱗片分化)가 빠를수록 구중(球重)이 증가(增加)하는 경향(傾向)을 보였다. 이상(以上)의 결과(結果)로 마늘의 조기재배(早期栽培)는 난지계(暖地系) 마늘을 사용하여 8월(月) 15일(日)~8월(月) 30일(日)에 저온(低溫) 개시(開始)하여 45일간(日間) 저온처리(低溫處理)로 9월(月) 29일(日)과 10월(月) 14일(日)에 파종(播種)하면 무처리(無處理)에 비(比)해 30일간(日間) 단축(短縮)되어 4월(月) 12일(日)에 수확(收穫)할 수 있고 수량(收量)도 많아 가장 효과적(效果的)이라 사료(思料)된다.