• 한국의류산업학회지
• /
• 제19권3호
• /
• pp.296-301
• /
• 2017

This study researched the status and prospect of a natural dye program in Gyeongsang region that focused on private centers with sufficient infrastructure and abundant human resources were available for natural dyes. The entire site for metropolitan cities that have difficulty in securing the land are limited (as well as smaller) because they are closer to the city; in addition, they do not own the drying house and the agricultural land for natural dyes. It is understood that the one-time program of all centers researched help to promote and maintain the centers rather than generating profit; in addition, it is shown that Jun - Aug (summer) is preferred over Dec - Feb (winter). This program uses natural indigo; consequently, natural dye program for hobby and education is operated when it is required because the number of participants are low in most cases, Persimmon Juice is used for the dyeing raw materials. Programs in operation are often outsourced with other institutes registered under private certification system; therefore, many cases of starting business are found in the institutes operating programs directly after obtaining the certification. Their plans do not allow for investment in facility such as enlargement of experience center and prospect of program; in addition, business value is generally bright for business strategies that include an exhibition shop for natural dye products and program development.

• 한국안광학회지
• /
• 제13권4호
• /
• pp.1-8
• /
• 2008

목적: 관련 이익 집단의 대학 안경광학과 부설 안경원의 필요성에 대한 인식 정도와 운영형태에 관한 의견을 조사하였다. 대상 및 방법: 현업 안경사 집단 50명과 안경광학과 재학생 및 일반인 집단 51명을 대상으로 설문을 통하여 대학 부설 안경원에 대한 의견과 예상되는 긍정적 또는 부정적인 효과, 업무 허용범위, 운영방식 등에 대하여 질의하고 그에 대한 답변을 바탕으로 집단별 통계를 분석하였다. 결과: 대부분의 응답자들은 대학 부설 안경원 설립에 긍정적인 반응을 보였으며, 부설 안경원을 통한 임상실습교육으로 안경광학과 졸업생의 검안능력을 향상시킬 수 있으리라 기대하는 것으로 나타났다. 결론: 한국에서 대학 부설 안경원의 설립운영은 임상분야의 교육과 연구에 크게 기여할 것으로 기대되며, 설립을 위하여 법률적인 제도 개선과 각 대학 안경광학과의 적극적인 추진노력이 요청된다.

• 분석과학
• /
• 제30권6호
• /
• pp.329-337
• /
• 2017

A major concern regarding most auto-repair shops in residential areas is the emission of odorous volatile organic compounds (VOCs) into the local atmosphere, especially during painting operations. VOCs contribute to poor local air quality and are responsible for the perceived odor and discomfort experienced by local residents. Sixteen major VOCs (6 aromatic hydrocarbons and 10 aliphatic carbonyl compounds) were selected as potential target compounds. The site was an auto-repair shop located in a central region of Seoul, South Korea, where the air quality of the site has been a subject of residents' complaints. The sampling points were as follows: 1) in the painting booth with new (NB) or old (OB) removal system, (2) in the exhaust duct after new (ND) or old (OD) odor removal filter, and (3) 2 m below the discharge vent (4 m above the ground) (outdoor air, OA). Each sample was coded: (1) before painting (BP), (2) during painting (DP), and (3) after painting (AP). The toluene level in the duct with the new removal filter during painting (ND-DP) was 1.5 ppm (v/v), while it was 3.8 ppm (v/v) in the right duct with an old removal filter during painting (OD-DP). Accordingly, the effect of filter replacement was reflected by differences in VOC levels. Therefore, accurate monitoring of odorous VOCs is an important step to reduce odor nuisance from local sources.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.156-172
• /
• 1999

Potential chemical hazards encountered in painting operation of four shipyards and a ship-repair shop were investigated through the material safety data sheets (MSDS). Material safety data sheets (MSDS) for 307 paints, 50 thinners and 34 binders were collected and reviewed. It was shown that various organic solvents such as aromatic hydrocarbons, aliphatic hydrocarbons, ketones, alcohols, glycols, glycol ether acetates and esters were contained in painting materials. Of these solvents, xylene was found in the largest number of painting materials. sixty percent of the thinners contained xylene in the contents of 20-100%. Other most frequently found solvents were 1-methoxypropanol, 1-methoxypropyl acetate, n-butanol, methyl isobutyl ketone, toluene, isopropanol, and n-butyl acetate, etc. Glycol ethers such as 2-methoxyethanol (2-ME), 2-methoxyethyl acetate (2-MEA), 2-ethoxyethanol (2-EE), 2-ethoxyethyl acetate (2-EEA) and 2-butoxyethanol (2-BA) were regarded as having the potential to cause adverse reproductive effects, embryotoxic effect and hematotoxic effects, and were found in some epoxy panting materials. Coal tar pitch was included in some paints(13%) where polynuclear aromatic hydrocarbons (PAHs) could be contaminated. Inorganic pigments such as lead chromate and zinc potassium chromate were found in some paints (8%). The epoxy resin based paints, which may contain isocyanates such as toluene diisocyanates and hexamethylene diisocyanates causing potential sensitization and asthma to upper respiratory organ, were mostly used in the shipyards. The constituents in the MSDS were significantly different from the results analyzed using gas chromatography/mass detector: minor constituents or impurities were omitted in many MSDS. In conclusion, xylene was the most frequent organic solvent in painting materials, and glycol ethers, including 2-ME, 2-MEA, 2-EE, 2-EEA and 2-BA, were found some products. Also, painting workers may be exposed to PAHs, lead, chromate, isocyanates, organic tin and other various chemicals. The compositions of chemicals in painting materials were variable significantly, and the hazards were changed. These facts should be considered in environmental monitoring and control of the hazards.

• 대한지역사회영양학회지
• /
• 제23권3호
• /
• pp.226-233
• /
• 2018

Objectives: This study was conducted to investigate the current status and to suggest future directions for health management of teenagers who use healthy school tuck shops to improve teenagers' eating habits while reducing and preventing obesity. Methods: A total of 29 students (16 middle school students and 13 high school students) took part in the interview for this study, and the interview was conducted for each school's focus group by using qualitative research methodology. Results: The current status of using healthy school tuck shops and suggested future directions were divided into two categories. Personal barriers such as discrepancies between personal perceptions and behaviors and lack of food choice suitable to individual tastes can be solved by rebuilding the operating system to provide intuitive promotion of behavior and customized products through improvements in existing products and new product development. A lack of consistent management from low utilization convenience and difficulty in maintaining a constant purchase price can be handled by establishing a solution to restricted physical access for products, as well as seeking profit by improving distribution costs via continuous cooperation between the school and community. Conclusions: Continuous funding and a system that reflects the needs and preferences of healthy school tuck shop users should be applied for sustainable operation of healthy school tuck shops to improve teenagers' eating habits.

• 한국의류산업학회지
• /
• 제23권4호
• /
• pp.469-479
• /
• 2021

This case study investigates fashion brands that have entered the pet fashion market. A total of 25 cases were identified and analyzed from three perspectives: 1) product types, size systems, prices, 2) design aspects, fabrics, patterns, styles, and 3) marketing strategies. The study results are as follows. First, the product types of pet fashion are not diverse, and only the sizes of small dogs can be found. However, there is a significant price difference between brands. Second, knitted fabrics with good elasticity are mainly used for pet fashion products, and patterns incorporating their brands are extremely common. The style is casual and sporty. Third, marketing strategies should include a new line within a brand or launch a single specialized brand as a one-shot test for consumer reaction. Additionally, it has been expanded and presented as a family look to meet the needs of the petfam. Further, existing fashion brands and retail-based brands select diverse small-scale dog fashion product brands and expand their operation as a dog lifestyle total selectional shop. Therefore, brands entering the future should consider strategies such as size segmentation, product diversification, and premium price of high-quality materials that help market products such as the expansion or promotion of existing brands.

• 한국안광학회지
• /
• 제5권1호
• /
• pp.107-116
• /
• 2000

본 연구에서는 전북 군산시 및 정읍시 소재 남녀 고등학생 850명을 대상으로 굴절이상, 시력검사, 안경 및 콘택트렌즈 착용상태, 안과상식, 시력관리 등에 관하여 설문조사를 실시하여 다음과 같은 결과를 얻었다. 1. 응답자 823명 중 38%가 정시안이고, 근시가 55.1% 원시가 7%를 차지하는 것으로 조사되었다. 2. 응답자 837명 중 381명(45.5%)이 안경 및 콘택트렌즈를 착용하는 것으로 조사되었고 이중에서 안경만 착용하는 학생이 78%로 제일 많고 안경과 콘택트렌즈 병용이 18% 콘택트렌즈만 착용이 4%로 나타났다. 3. 처음 안정 및 콘택트렌즈 착용을 위해서 시력검사를 받은 장소는 안경원이 64.7% 병원이 28.3%, 시력검사를 받지 않음이 4.2%, 기타가 2.7%로 나타났으며, 안경 및 콘택트렌즈 교체를 위한 시력검사 장소는 안경원이 82%, 병원이 9.5%, 시력검사를 받지 않음이 6.6%, 기타가 1.9%로 나타났다. 4. 시력검사의 주기는 6개월~1년이 54.1%, 6개월 이하가 9.2%, 1년~2년이 29.5%, 2년 이상 7.2%로 나타났다. 5. 콘택트렌즈의 구입 장소는 응답자의 94%가 안경원에서, 6%는 병원에서 구입한 것으로 조사되었다. 6. 안경보다 콘택트렌즈를 선호하는 이유에 대해선 미관상 이유가 51.2%, 운동시간 편함이 23.1%, 안경이 무거움이 9.8%, 기타는 15.7%로 조사되었다. 7. 착용하고 있는 안경테 종류는 플라스틱테가 24.4%, 금 은테가 43.4%, 칼라테가 32.1%를 조사되었다. 8. 안경테 선택시 고려사항은 디자인이 37%, 품질이 36%, 가격이 14.7%, 브랜드가 12.5%로 조사되었다. 9. 안경교체 시기는 6개월 이하가 10.5%, 6개월~1년이 57.3%, 1년~2년 사이가 22.4%, 2년 이상이 9.6%로 조사되었다. 10. 안경을 쓰면 쓰지 않는 것보다 눈이 나빠진다는 그릇된 안과상식에 대해 응답자 중 100% 믿는 학생이 10.5%, 80% 믿는 학생이 22.5%, 50% 믿는 학생이 49.5%, 전혀 믿지 않는 학생이 17.5%로 조사되었다. 11. 시력관리에 대하여 관심 있다가 48.5% 관심 없다가 51.5%로 조사되었다. 시력관리의 방법을 묻는 질문에 TV시청, 컴퓨터사용, 독서시의 거리조절이 49%, 단전호흡 및 눈맛사지가 11%, 식이요법이 4%, 관심 없다가 36%로 나타났다. 12. 20세 이후 성년이 되었을 때 시력 교정수술의 선호도를 묻는 질문에 원한다가 45.9%, 원치 않는다가 27%, 잘 모른다가 27.1%로 조사되었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2002년도 제3회 최신 분말제품 응용기술 Workshop
• /
• pp.25-37
• /
• 2002

The most important industrial application of gamma radiation in characterizing green compacts is the determination of the density. Examples are given where this method is applied in manufacturing technical components in powder metallurgy. The requirements imposed by modern quality management systems and operation by the workforce in industrial production are described. The accuracy of measurement achieved with this method is demonstrated and a comparison is given with other test methods to measure the density. The advantages and limitations of gamma ray densitometry are outlined. The gamma ray densitometer measures the attenuation of gamma radiation penetrating the test parts (Fig. 1). As the capability of compacts to absorb this type of radiation depends on their density, the attenuation of gamma radiation can serve as a measure of the density. The volume of the part being tested is defined by the size of the aperture screeniing out the radiation. It is a channel with the cross section of the aperture whose length is the height of the test part. The intensity of the radiation identified by the detector is the quantity used to determine the material density. Gamma ray densitometry can equally be performed on green compacts as well as on sintered components. Neither special preparation of test parts nor skilled personnel is required to perform the measurement; neither liquids nor other harmful substances are involved. When parts are exhibiting local density variations, which is normally the case in powder compaction, sectional densities can be determined in different parts of the sample without cutting it into pieces. The test is non-destructive, i.e. the parts can still be used after the measurement and do not have to be scrapped. The measurement is controlled by a special PC based software. All results are available for further processing by in-house quality documentation and supervision of measurements. Tool setting for multi-level components can be much improved by using this test method. When a densitometer is installed on the press shop floor, it can be operated by the tool setter himself. Then he can return to the press and immediately implement the corrections. Transfer of sample parts to the lab for density testing can be eliminated and results for the correction of tool settings are more readily available. This helps to reduce the time required for tool setting and clearly improves the productivity of powder presses. The range of materials where this method can be successfully applied covers almost the entire periodic system of the elements. It reaches from the light elements such as graphite via light metals (AI, Mg, Li, Ti) and their alloys, ceramics ($AI_20_3$, SiC, Si_3N_4, $Zr0_2$, ...), magnetic materials (hard and soft ferrites, AlNiCo, Nd-Fe-B, ...), metals including iron and alloy steels, Cu, Ni and Co based alloys to refractory and heavy metals (W, Mo, ...) as well as hardmetals. The gamma radiation required for the measurement is generated by radioactive sources which are produced by nuclear technology. These nuclear materials are safely encapsulated in stainless steel capsules so that no radioactive material can escape from the protective shielding container. The gamma ray densitometer is subject to the strict regulations for the use of radioactive materials. The radiation shield is so effective that there is no elevation of the natural radiation level outside the instrument. Personal dosimetry by the operating personnel is not required. Even in case of malfunction, loss of power and incorrect operation, the escape of gamma radiation from the instrument is positively prevented.

• 항공우주정책ㆍ법학회지
• /
• 제28권2호
• /
• pp.97-115
• /
• 2013

항공기 운항의 가장 기본이 되는 규정은 ICAO Annex 6. Operations of Aircraft(항공기 운항)이다. 이 중 Part I은 상업항공운송용 항공기에 대한 것이며, 민간항공의 대부분을 차지하고 있다. ICAO에서는 항공기 운항에 관한 표준과 권고사항(SARPs: Standards and Recommended Practices)을 제정하여 체약국(Contracting States)이 어느 정도 국내규정에 반영하여 적용하고 있는지를 평가하고 있는데 이를 항공안전평가(USOAP)라고 한다. 기존의 ICAO 항공안전평가는 순간포착(Snap-shop) 방식으로 평가하였으나, 2013년부터 항공안전상시평가(USOAP-CMA) 방식으로 바뀌게 되어 시행된다. ICAO 항공안전평가 결과는 국적사의 노선, 보험료, 항공사간 제휴 등 국가항공산업 전반에 큰 영향을 미친다. 낮은 등급으로 판정 시, 국제사회에서 집중 주목이 되고 우리나라 국적사들이 운항정지, 노선제한, 항공사간 제휴 제한, 보험료 등 직/간접적으로 영향을 받을 수 있다. 따라서 우리나라 항공산업의 글로벌 경쟁력을 위해서는 ICAO 항공안전평가에서 '우수국가' 지위를 유지하여 높은 신인도를 이어나가는 것이 매우 중요하다. 우리나라는 2008년 실시된 ICAO 항공안전평가에서 종합 평점 98.89점을 획득, 세계 1위를 차지한 바 있으나, 2008년 이후 개정된 사항이 제대로 반영되지 못하고 있는 실정이다. 이에 따라 본 논문에서는 가장 최신의 개정판을 이용하여 ICAO Annex 6 Part I의 국내 항공법규 반영정도를 파악해보고자 한다. 아울러 미반영된 부분과 부분반영된 부분에 대한 반영방안도 같이 제시하고자 한다.

• 한국인쇄학회지
• /
• 제30권3호
• /
• pp.89-114
• /
• 2012

For as to world, the concern about the environment problem is enhanced than any other time in the past because of being 21 century. And the environment problem is highlighted as the world-wide issue. The time of the environment problem intimidates the alive of the mankind and presence of an earth over the time. It becomes the essentiality not being selection in the personal living or the economical viewpoint now to prepare for the climatic modification. As to the company management, the green growth period which it excludes the environment management considering an environment, cannot carry on the company the continued management comes. That is, in the change center of the management paradigm, there is the environment management. Nearly, the greenhouse gas which the publication industry is the environmental toxic material like all industries is generated. The greenhouse gas is ejected in the process of running the manufacturing process and print shop of the various kinds material used as the raw material of the book. Particularly, the tree felling for getting the material of the paper is known to reach the direct influence on the global warming. This study does according to an object it considers and organizes the environment parameter based on this kind of fact as to the publication industry. And it is determined as the reference which is used as the basic materials preparing the case that carbon exhaust right transaction(CAP and TRADE) drawing are enforced in all industries and is sustainable the management of the publication industry and reduces the environmental risk among the company many risk management elements and plans and enforces the publication related policy that there is a value. In the printing publication industry, this study tried to inquire into elements discharging the environmental pollutant or the greenhouse gas. Additionally, in the printed publication production process, it tried to inquire into the effort for an environment-friendly and necessity at the printing paper and the printers ink, regarded as the element discharging the greenhouse gas all kinds of the printing materials, operation of the print shop and all kinds of the machines and recycle process, and etc. These considerations make these industrial field employees aware of the significance about a conservation and environmental protection. They try to give a help in the subsequent study producing quantitatively each environmental parameter emission of green house gas. This makes the calculation of the relative $CO_2$ output reproached ultimately possible. Meanwhile, in a sense, many research protects and improving an environment in connection with the contents of research at the printing publication industrial field is in progress. There will be the voluntary human face that it has to protect an environment but this can not do by the outside factor according to all kinds of environment related law and regulation. Anyway, because of acting on company management as the factor of oppression, the increase of this environment-related correspondence cost could know that the research that the environment loading relates with a procurement and development, environment management system introduction, quality control standard, including, normalizing including a material, and etc. through the part of the effort to reduce the cost low was actively in progress. As to the green growth era, as follows, this paper prescribed the subject and alternative of the print publication industry. It is surrounded by the firstly new digital environment and the generation of the subject. And secondly the printing industry is caused by the point of time when the green growth leaves by the topic which is largest in the global industry and it increases. The printing publication industry has to prepare the bridgehead for the environment-friendly green growth as the alternative for this resolution with first. The support blown in each industry becomes the obligation not being selection. Prestek in which the print publishing was exposed to spend many energies and which is known as the practice of the sustainable print publishing insisted that it mentioned importance of the green printing through the white pages in 2008 and a company had to be the green growth comprised through the environment-friendly activity. The core management for the sustainable printing publication industry presented from Presstack white pages is compacted to 4 words that it is a remove, reduce, recover, and recycle. Second, positively the digital printing(POD) system should be utilized. In the worldwide print out market, the digital printing area stops at the level of 10% or so but the change over and growth of the market of an analog-to-digital will increase rapidly in the future. As to the CEO Jeff Hayes of the Infoland, the offset print referred to that it of the traditional method got old and infirm with the minor phase of the new printing application like the customer to be wanted publication and the print of the digital method led the market. In conclusion, print publishers have to grasp well the market flow in the situation where a digitalization cannot be generalized and a support cannot avoid. And it keeps pace with the flow of the digital age and the recognition about the effort for the development and environment problem have to be raised. Particularly, the active green strategy is employed for the active green strategy.