• 한국콘텐츠학회논문지
• /
• 제19권9호
• /
• pp.402-410
• /
• 2019

한국의 지역 축제는 지난 20년 동안 규모에서 성장하였지만 부침을 겪어왔다. 축제 운영의 시행착오를 거치면서 축제 운영관리 측면에서 관객 수의 예측, 행사규모 기획, 매출 규모의 산정과 확대, 운영과정에서 각종 참가자들에 대한 관리 등의 문제점들이 부각되었다. 이런 문제의 해결을 위해, 본 연구는 지역규모 축제의 운영을 위한 모바일 결제 시스템과 축제 운영관리 시스템을 플랫폼 형태의 웹과 앱의 복합 운영 시스템으로 설계하고 개발하였다. 본 연구의 개발 시스템은 4가지 기본적인 기능들을 제시한다. 티켓 발권관리, 참가자 확인과 입퇴장 관리, 축제 화폐의 충전과 결제 사용관리, 참가자들에 대한 운영관련 정보의 실시간 제공 및 관리, 그리고 각 주체별 성과분석 리포팅 기능을 포함한다. 지역 축제에 실제로 적용하여 지역 상점주의 광고나 협찬 참여가 가능토록 하였으며 본 시스템를 통한 지역 상권과 축제의 활성화에 대한 기여를 확인하였다.

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.59-66
• /
• 2004

In construction of new ships and large steel bridges in Korea, pre-construction primers (PCP), also known as shop primer, are routinely used and retained as an integral part of the protective coating system. Retention of PCP's can significantly reduce building schedule and cost. Retaining PCP through the so-called "sweep blasting" procedure eliminates or minimizes the necessity of a second blast operation, thus shortening overall schedule as well as reducing labor cost and hazardous waste disposal cost. This study evaluates the feasibility of retaining PCP as the part of primer for high performance protective coating systems applied to ships' hull, bottom and ballast tanks. Upon proving that the retention of the PCP is a viable option, the process of coating application can he improved significantly in terms of cost and working schedule of new ships and large steel bridges. Results indicate that use of the PCP via sweeping blasting in conjunction with standard high performance protective coating systems does not degrade the overall performance of the coating systems. At the same time, it is also highly recommended that the secondary surface preparation should consist of grit blasting of weld burnt and other damaged areas to SSPC SP-IO grade (Sa 2.5 Gr.), Near White Blast Cleaning with proper application and attention to detail.

• 산업공학
• /
• 제21권4호
• /
• pp.411-417
• /
• 2008

An impeller is a type of high-speed rotor that is used to compress or transfer fluid under high-speed and pressure at high temperatures. The impeller is composed of an axial hub and several blades attached along the hub. The weight and shape of an impeller must be balanced, because their imbalances can cause noise and vibration, which can lead to the breakage of the impeller blades during operation. Thus, the hub and blades of an impeller are commonly machined in a 5-axis NC machine to obtain qualified surfaces. The impeller machining strategy or process plan can not be easily obtained due to the complex, overlapped and twisted shapes of impeller blades. Skillful machining process planners may generate appropriate machining strategies based on their experiences and floor data. However, in practice most shop floor data for the impeller machining is not well-structured such that it does not effectively provide a process planner with information for machining strategies and/or process plans. This paper reports the development of a case-based machining strategy support system (CBMS) that employs case-based reasoning to obtain the machining strategy of an impeller by using the existing machining strategies of the shop floor. The CBMS generates impeller machining strategies through a stepwise reasoning process considering the similarity features between the blade shapes and machining regions. A case study is provided to demonstrate that CBMS can generate useful machining strategies facilitating process planners. The developed system can simulate the tool paths of impeller machining and runs on the web.

• 한국실내디자인학회논문집
• /
• 제21권2호
• /
• pp.174-185
• /
• 2012

The purpose of this study is to suggest planning strategy of tenant mix for UEC based on the final result of tenant mix analysis of five different research cases. The following is the comprehensive explanation about the result of tenant mix planning strategy for UEC currently in operation and when planning a new facility. First, overall research cases in this study show the tendency of following an old tradition, which stresses direct sales focusing on retail and dining adaptation. In order to compensate the defect, it is suggested to adopt new type of tenants with the functional mix of retail and dining with entertainment rather than decreasing the proportion of retail and dining tenant and increasing it of entertainment tenant. Second, the floorplan of UEC should adopt racetrack or circuit form that can stimulate shoppers' circular movement so to expose them to as much tenants as possible. Service consumption mode related tenants are required to place on the side or the edge of UEC, while retail consumption mode related tenants should be planned in the center. Among dining consumption mode related tenants, impulse dining tenants like a coffee shop should be placed at the turning point or at the end of the pathway, destination tenants like a restaurant and a food court, on the other hand, is needed to be placed in the center of the space. In case of Entertainment related tenants, destination tenants like bookstore or multiplex should also be placed at the end of the pathway, and on the way to those tenants, it is required to place general tenants that can share target customers with them. On the contrary, game center or record shop like tenants that can stimulate impulse sales should be placed on the visitor's main move or near the other destination tenants. Third, anchor tenants play an important role in gathering people to the UEC, and then induce them to visit the other tenants that are located near the anchors. Thus it is suggested to plan to place general tenants on the same floor as anchor tenants are placed so they can share the characteristics of target customers which create synergy effect.

• 대한조선학회논문집
• /
• 제42권1호
• /
• pp.64-72
• /
• 2005

Digital manufacturing is a technology to simulate the real manufacturing process using the virtual model representing the physical schema and the behavior of the real manufacturing system including resources, processes and product information. Therefore, it can optimize the manufacturing system or prevent the bottleneck processes through the simulation before the manufacturing plan is executed. This study presents a method to apply the digital manufacturing technology for the steel cutting process in shipyard. The system modeling of cutting shop is carried out using the IDEF and UML which is a visual modeling language to document the artifacts of a complex system. Also, virtual NC simulators of the cutting machines are constructed to emulate the real operation of cutting machines and NC codes. The simulators are able to verify the cutting shape and estimate the precise cycle time of the planned NC codes. The validity of the virtual model is checked by comparing the real cutting time and shape with the simulated results. It is expected that the virtual NC simulators can be used for accurate estimation of the cutting time and shape in advance of real cutting work.

• 한국정보통신학회논문지
• /
• 제20권8호
• /
• pp.1415-1421
• /
• 2016

무기체계의 기능 및 성능 검증을 위한 시험들이 지속적으로 증가함에 따라 가용 자원들의 효율적인 활용을 위한 방안에 관련된 연구가 대두되고 있으며, 자원할당 복잡도가 증가함에 따라 시험계획 시에 의사결정 지원이 요구되고 있다. 시험자원할당은 전통적인 FJSP(Flexible Job Shop Problem)와 기본적으로 동일한 문제이며, 이는 NP-hard문제로서 기존의 경험기반 시험자원 할당 방법으로는 시간 효율적인 자원할당에 있어서 한계가 존재한다. FJSP에 유전자알고리즘을 적용한 최적해 탐색 연구가 진행되어 왔지만, 하나의 기계조작에 대해 두 개 이상 기계의 동시 작동이 필요한 시험자원할당 도메인에서의 적용은 제한적이다. 이에 본 논문에서는 가변 그룹 유전자알고리즘을 제안한다. 제안하는 알고리즘은 수작업 기반의 기존 시험자원할당을 자동화하고 최적화함으로써 시험 효율을 향상시킬 것으로 기대되며, MATLAB을 이용한 시뮬레이션을 통해 그 적용성을 확인하였다.

• 한국시뮬레이션학회논문지
• /
• 제19권2호
• /
• pp.9-16
• /
• 2010

본 사례 연구는 가상환경에서 자동차 의장 라인의 PLC 코드 검증 시스템을 구현하였다. 그간 인력과 PLC 검증 시간을 줄이고자 표준화된 PLC 에디터를 개발하려고 노력해왔으나, 실제 현장 환경에서 PLC 에디터를 적용하는데 어려움이 있었다. 본 연구는 현장의 PLC 모듈과 통신하며, 특별한 프로토콜을 이용하여 연결 환경을 구축하는 가상장비를 개발했다. PLC 모듈과 가상장비가 OPC 프로토콜에 의해 실시간으로 통제되므로 실제 장비를 설치하지 않고 PLC 코드를 검증할 수 있게 되었다. 실험적 모델을 자동차 공장의 최종 조립라인에 적용하고, DELMIA Automation을 이용하여 검증하였다. 결론적으로 PLC 코드 검증 과정과 가상장비 작동에 이 시스템이 유용하게 이용되었다. 이 시스템은 PLC 코드 개발 시간을 절약하며 조립라인의 생산성, 무결성을 높이는데 기여했다.

• 산업공학
• /
• 제22권1호
• /
• pp.73-84
• /
• 2009

In this paper, we propose a dispatching algorithm for constructing a Factory Operating System (FOS) which can operate semiconductor fabrication factories more efficiently and effectively. We first define ten dispatching criteria and propose two methods to apply the defined dispatching criteria sequentially and simultaneously (i.e. fixed dispatching architecture). However the fixed type methods cannot apply the criteria adaptively by considering changes in the semiconductor fabrication factories. To overcome this type of weakness, an adaptive dispatching architecture is proposed for applying the dispatching criteria dynamically based on the factory status. The status can be determined by combining evaluation results from the following three status criteria; target movement, workload balance, and utilization rate. Results from the shop floor in past few periods showed that the proposed methodology gives a good performance with respect to the productivity, workload balance, and machine utilization. We can expect that the proposed adaptive dispatching architecture will be used as a useful tool for operating semiconductor fabrication factories more efficiently and effectively.

• 한국생산제조학회지
• /
• 제23권1호
• /
• pp.15-20
• /
• 2014

The manufacturing equipment on most shop floors consists of numerical control machines, and the condition of each piece of equipment is monitored and controlled by an internal sensor or programmable logic controller (PLC). To control and monitor production lines that consist of an equipment or production module, a separate control and monitoring system such as a manufacturing execution system should be introduced. However, there is no standardized system, and it is costly and difficult to build a system for small or medium-sized plants. In this paper, a PLC-based supervisory system for operation control of a group of production machines is proposed, and the developed PLC-based system is evaluated by applying it to a computer numerical control machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.943-946
• /
• 2002

This paper presents atomization characteristics of cutting fluids. To analyze the behavior characteristics of cutting fluid, analytical approach and experimental measurement were performed to predict the aerosol size, velocity and concentration due to cutting fluid atomization mechanism in machining operation. The established analytical model which is based on atomization theory analyzes the cutting fluid motion and aerosol generation in machining process. The predictive models can be used as a basis for environmental impact analysis on the shop floor. It can be also facilitate the optimization of cutting fluid usage in achieving a balanced consideration of productivity and environmental consciousness.