• Journal of Bio-Environment Control
• /
• v.20 no.4
• /
• pp.341-345
• /
• 2011

This study was aimed to select the optimal mat condition using existing plant-mats for the efficient planting of bedding Chrysanthemum. At fifty days after cutting with Dendranthema grandiflorum 'Ford', root formation among the treatments using eight different mats outstood with the treatment using 10 mm thick coir net, which has medium inserted between mat layers - called C treatment, compared to other treatments; this treatment had the highest values in the plant height and shoot fresh weight, which were 29 cm and 5.6 g, respectively. On the contrary, in 40 days after transplanting root-formed mats to field, 12 mm thick jute net, which has medium inserted between mat layers, had the highest plants compared to other treatments. However, there was no significant difference in shoot weight compared to C treatment. In experiment of different lengths of cut, the results of growth after transplanting showed that 5 cm long cut performed best compared to 3 and 8 cm long cuts.

• Korean Journal of Environmental Biology
• /
• v.20 no.4
• /
• pp.355-359
• /
• 2002

This study was carried out to investigate the combined effect of cold storage with irradiation on rooting of chrysanthemum cuttings. Each cutting was six cm in length with three real leaves. A set of Groups of the cuttings was irradiated with 0 to 70Gy of gamma-ray after four weeks of cold storage, while another groups were irradiated with the same doses and then stored at $4^\circ{C}$ for four weeks. Root and shoot growth were observed at 15 and 20 days after planting of the cuttings in a Plug tray. Accelerated root formation was observed in 30 Gy irradiated group, and root growth was also enhanced in 20 and 30 Gy irradiated groups 20 days after planting. In case of irradiation combined with pre-treatment of cold storage, survival rate of cuttings was the highest (80%) in 30 Gy irradiated group. The groups treated with irradiation first before cold storage were apparently better in root formation, among which 50 Gy irradiated group showed the highest rate of root growth.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.2
• /
• pp.81-85
• /
• 2001

The experiment was conducted to know the effect of plant growth regulators on axillary bud elongation from in vitro stem cutting and the possibility of virus-free stock production. Axillary buds were well elongated in 3/4 strength MS medium supplemented with 0.1 or 0.5 mg/1 BA and 0.05 mg/1 NAA. Transferred plantlets could be established well in vermiculite and peat moss mixture (3:1, v/v) compare to other mixtures. In virus indexing, all the varieties of mother plants were infected by GLRV Ⅲ. Infected percentages of the three varieties were ranged from 30% to 75%. But negative response was revealed against the other species of virus, GLRV Ⅰ, GFLV and ArMV. Plantlet of 'Schuyler' and 'Muscat of Alexandria', which were cultured in vitro, showed positive response against GLRV Ⅲ and infected percentage of the former was 37.5% but the latter, 12.5%. On the other hand, that of 'Campbell Early' negativiely responded against all the species of virus indexed.

• Journal of Sericultural and Entomological Science
• /
• v.38 no.2
• /
• pp.93-99
• /
• 1996

By treatment(dropping) of 0.1~0.4% colchicine solution on the sprouts of winter buds of hard wood cutting slips for 4~5 days, two lines of artificial autotetraploids from Yongchonppong and one line from Yeongbyonppong were bred and the important cultivative characteristics of those new lines were as follows. The greentip sprouting stage of the new bred lines in spring season is later than the parental varieties by two days, but growth speed of the new lines after sprouting was faster than that of the parental varieties reaching the same level development with the parental varieties at the fifth leaf sprouting stage to be mid varieties same as the origins. The leaf shape of the new bred lines was wide round and the petioloes were long and thick. The thickness of leaf was thicker than the parental varieties by 17-33% and single leaf weight was heavy. The leaf area weight increased by 21-31% and the content of chlorophyll was also higher by 11-33%. With all the characteristics, the new breds produced good quality of leaves. The length and number of branches were shorter and less, respectively, than the parental varieties, but the internode length was either same or longer than the parents. Looking at the characteristics, the constitution of shoots was slightly inferior to the parental varieties. The cold hardness expressed by the death top rate of Sawonppong 23 and Sawonppong 24 was same level as that of Yongchonppong, but Sawonppong 25 was stronger than Yeongbyonppong in it with a high infection rate of dwarf disease. The productivity was lower than the parental varieties, but young shoot rate to shoot and branch and the ratio of leaf to young shoot were higher than the parental varieties. The fertility of Sawonppong 23 and Sawonppong 24 was comparatively high with 62% of cross success, but that of Sawonppong 25 was low with 23.9% of cross success.

• Korean Journal of Organic Agriculture
• /
• v.21 no.3
• /
• pp.437-450
• /
• 2013

Miscanthus sacchariflorus var. No. 1 has been newly developed in Korea. This study was conducted to assess the feed value of M. sacchariflorus var. No. 1 at different growth and harvesting time. Total 3 different miscanthus - 1y4m (first shoot and harvested at 4 month), 2y4m (second shoot and harvested at 4 month) and 2y8m (second shoot and harvested at 8 month). Two experiments were carried out, In vitro rumen simulated fermentation and In situ dry matter digestibility (DMD). Ruminal pH at in vitro fermentation were higher in M. sacchariflorus var. No. 1 treatments compared to the rice straw (RS). In volatile fatty acid production, 1y4m resulted in higher acetate production than the other M. sacchariflorus var. No. 1 at higher maturity stages. Significant differences among treatments were observed in propionate and total volatile fatty acid (VFA) productions at 9, 24 and 48 h of incubation times. Higher ammonia nitrogen productions were found as increased maturity of M. sacchariflorus var. No. 1. At In situ experiment, high DMD was detected in the order of RS (60.51%) > 1y4m (57.65%) > 2y4m (57.63%) > 2y8m (46.28%). The results from this study indicate that young and early harvested M. sacchariflorus var. No. 1 are able to improve its nutrient values in the ruminant animal.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.4944-4949
• /
• 2012

The purpose of this paper is concerned with a development of air gun for use at work. A air gun is the tool to remove of cutting fluid and workpiece chip in industrial field used machine tool. And it generally is used to shoot a jet of compressed air. Worker must prepare respectively air gun for suction and shooting a jet of compressed air. Therefore we has developed new air gun. In this paper we research for design and analysis of it. The air gun is composed of body, pipe, opening and shutting unit, turning unit, air tube and elements for fabrication. The developed air gun is experimented to confirm the efficiency.

• Journal of the Korean Society of Industry Convergence
• /
• v.23 no.5
• /
• pp.817-823
• /
• 2020

In recent, the machining of difficult-to-cut materials such as titanium alloys, stainless steel, Inconel, ceramic, glass, and carbon fiber reinforced plastics (CFRP) used in aerospace, automobile, medical industry is actively researched. Abrasive waterjet is a non-traditional processing method in which ultra-high pressure water and abrasive particles are mixed in a mixing chamber and shoot out jet through a nozzle, and removed by erosion due to collision with a material. In particular, the nozzle of the abrasive waterjet is one of the most important parts that affect the machining quality as with a cutting tool in general machining. It is very important to monitor the condition of the nozzle because the workpiece is uncut or the surface quality deteriorates due to wear, expanding of the bore, damage of the nozzle and clogging of the abrasive, etc. Therefore, in this paper, we propose a monitoring system based on Acoustic Emission(AE) sensor that can detect nozzle condition in real time during AWJ processing.

• Journal of Sericultural and Entomological Science
• /
• v.32 no.2
• /
• pp.101-104
• /
• 1990

The bacteria isolated from mulberry trees which had shoot soft rot symptoms occurred after intermediate cutting during autumn rearing season were indentified. External morphology of the bacteria showed rod shape with peritrichous flagella, and were facultative anaerobes in oxygen requirement test. The baacteria easily putrefied the slices of potato and carrot when they were placed on to the center of sliced surfaces, and the bacteria, also, iniciated rapid development of soft rot symptoms on mulberry leaves in pathogenesity test. The results of morphological, physiological and pathological tests on the bacteria suggested that the isolate could be a strain of Erwinia carotovora subsp. carotovora.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.22 no.1
• /
• pp.70-79
• /
• 1977

Perennial weeds which were grown in transplanted paddy field formed their tubers under shortday condition. Under short day treatment, the induction periods for tuber formation were different depending upon the weed species. 80% cut tubers of the weeds did not loose their developing ability perfectly. Emergence also affected by soil conditions and depths covered.

• Journal of Bio-Environment Control
• /
• v.13 no.2
• /
• pp.112-119
• /
• 2004

Objective of this research was to evaluate the effects of nutrient solution strength and Arbuscular Mycorrhizal Fungi (AMF, Glomus sp.) on growth and flowering of potted miniature rose (Rosa hybrids L. cv 'Scarlet'). To achieve this, plants cultured with six different strength of Japanese Horticultural Experiment Station solution (0.125, 0.25, 0.5, 1.0, 2.0, and $4.0\;{\times}\;{full}$ strength) and inoculated with AMP at cutting and transplanting. Leachate EC increased as solution strength were elevated. The leachate EC were not different between non-inoculated plants and AMF treatment at cutting, but significantly decreased when plants were inoculated with AMF at transplanting. The elevated strength of nutrient solution resulted in decrease of leachate pH. When plants were inoculated AMF at transplanting, leachate pH was lower than those of non-inoculated plants and inoculated with AMF at cutting. At harvesting (93 days after transplanting), plant height, leaf width, number of branches and shoot fresh and dry weight of rose 'Scarlet' increased with elevated nutrient solution strength. AMF treatment at transplanting of potted rose 'Scarlet' showed the best results in growth such as chlorophyll content, number of flowers, and shortening the days required to flower. The content of N, P, K, and Mn in leaf tissue of potted rose increased by elevated nutrient solution strength and AMF treatment, while the tissue Na contents decreased by an AMF treatment.