• International Journal of Industrial Entomology and Biomaterials
• /
• 제4권2호
• /
• pp.143-147
• /
• 2002

Studies on the interrelationship between biological yield and harvest index, and their association with shoot rearing were carried out in 9 promising mulberry genotypes, which indicated significant variations among genotypes. Biological yield had close association with leaf yield components indicating that they are inter-related for higher productivity in mulberry, Biological yield revealed highly significant positive correlation with important leaf yield components. However height of the longest branch showed negative correlation with biological yield. Genotypes with higher biological yield associated with low ratio of stem weight to leaf weight and high Harvest index on dry weight basis are to be selected for shoot rearing. Biological yield recorded on fresh weight basis had less impact on the present study in comparison to dry weight basis.

• 한국자원식물학회지
• /
• 제9권3호
• /
• pp.279-284
• /
• 1996

청양재래와 유성 2호 2품종을 공시하여 원줄기를 10cm로 고정시키고, 구기순 채취길이를 20cm, 30cm, 40cm로 달리 하였을 때 구기자나무의 생육적 특성 및 구기순의 수량을 알아봄으로써 구기순 재배에 필요한 기초 자료를 얻고자 수행한 시험 결과를 요약하면 다음과 같다. 1. 유성2호가 청양재래에 비해 구기순 수, 구기순당 엽수, 주당 총엽수, 수확횟수는 많았고 구기순의 굵기는 굵었으나 엽장, 엽폭은 작았다. 2. 청양재래의 구기순 채취횟수는 4.5회이었으나 유성2호는 5.5회로서 청양재래보다 1회 더 채취할 수 있었다. 3. 구기순의 건물중은 $1.01{\sim}1.03g$이었고, 줄기 : 엽비율은 46 : 54로 엽비율이 8% 높았다. 4. 구기순의 수량은 청양재래가 $108{\sim}204kg/10a$이고 유성 2호는 $215{\sim}383kg/10a$ 이었으며, 유성 2호는 년차간의 수량 증감폭이 적어 재식 당년의 수량을 기대할 수 있었다. 5. 청양재래의 구기순 수를 제외한 공시품종의 각 생육형질은 수량과 고도의 정(正)의 상관적이었으며, 유성 2호의 구기순 수는 주당 총엽수를 제외한 각 생육형질 및 수량과 부(負)의 상관이 있었다.

• 한국자원식물학회지
• /
• 제22권3호
• /
• pp.220-226
• /
• 2009

An experiment was conducted to find out among 9 trap settings the most appropriate site for trap placement in the Brinjal field based on Brinjal shoot and fruit borer trapping efficiency, shoot and fruit infestation, healthy and total fruit yield, and BCR. The efficiency of different trap setting positions varied significantly. Trapping efficiency observed the $T_{1}$ ensured the minimum shoot and fruit infestation 10.02% and 20.95%, respectively, minimum infested fruit yield (4.75 ton/ha), maximum healthy and total fruit yield (26.72 and 31.47 ton/ha) and the maximum BCR (1.70), which was followed by $T_{2}$ and $T_{4}$. The minimum trapping efficiency of $T_{9}$ treatment led the maximum shoot and fruit infestation 13.89 and 29.26%, respectively, maximum infested fruit yield (7.59 ton/ha), minimum healthy and total fruit yield (17.74 and 25.32 ton/ha) and the minimum BCR (1.00). A correlation between the number of BSFB adults trapped from the most efficient trap setting and the shoot and fruit infestation recorded and found a linear positive correlation between number of BSFB adults trapped and shoot infestation (r = 0.781) and fruit infestation (r = 0.810). The effect of pheromone trap positions observed in this study may be attributed to the easy accessibility of the lures and traps, when they are placed at the canopy.

• 한국자원식물학회지
• /
• 제9권3호
• /
• pp.268-275
• /
• 1996

봄철 더덕순 채취(採取)가 더덕의 수량(收量) 및 품질(品質)에 미치는 영향(影響)을 구명(究明)하기 위하여 1992년부터 1994년까지 3년간 시험한 결과(結果)를 요약(要約)하면 다음과 같다. 1. 더덕순 채취별(採取別) 생육(生育)은 채취회수(採取回數)가 많을수록 생육은 부진하였으며, 종자에서도 중량(重量)이 가벼워지는 경향이었다. 2. 더덕순 채취수량(採取收量)은 3회(回) 채취구(採取區)에서 3년간 29.5MT/ha으로 가장 높았고, 가식률(可食率)은 1회 채취구(採取區)가 100%로 가장 높게 나타났다. 3. 더덕뿌리에 있어서 더덕순 채취(採取)는 무채취(無採取)에 비(比)하여 오히려 품질(品質) 및 수량(收量)의 감소(減少)를 나타내었으며, 채취가능(採取可能) 회수(回數)는 1회(回) 채취(採取)정도였고 그 이상(以上)은 수량(收量) 및 품질저하(品質低下)로 채취(채취)가 불가능하였다.

• 한국작물학회지
• /
• 제51권1호
• /
• pp.14-25
• /
• 2006

Response of grain yield and milled-rice protein content to nitrogen (N) rates at various growth stages is critical for quantifying real-time and real-amount of applied N requirement for target grain yield and protein content. An experiment including 10 N rate treatments at transplanting, tillering and panicle initiation stages with four rice cultivars in 2003, 6 N treatments with two rice cultivars in 2004 and 2005 was conducted. Increase of N rates at PIS significantly increased both grain yield and milled-rice protein content but increase of N rates at tillering stage significantly increased grain yield but not milledrice protein content. Therefore, high grain yield and low milled-rice protein content would be difficult to obtain only by adjusting N rates at PIS. Internal N use efficiency (INUE) was 60.5 kg grain/kg N accumulation on an average over N treatments, cultivars, and experimental years, showing considerable reduction especially at high shoot N accumulation in the experimental year of low sunshine duration. Milled-rice protein content tended to increase almost linearly with increasing shoot N accumulation, but it revealed big variation even at the same shoot N accumulation at harvest. Milled-rice protein content decreased with increasing INUE. N accumulation in the milled rice increased at an almost constant proportion of 45.5 percent of the shoot N accumulated at harvest, showing slight decresing proportion with the increasing shoot N accumulation.

• Journal of Biosystems Engineering
• /
• 제19권1호
• /
• pp.17-21
• /
• 1994

This reasearch was performed to provide the fundamental intonation for the mechanization of Korean pine cone harvest when the shoot shearing method is adopted. Shear force and stress of pine cone shoots were measured and analyzed for this purpose. Samples are selected along their harvesting time and tested in 17 levels of shoot diameter from 10 to 26mm with 1mm increment. 1) Shear force-deformation characteristics showed that shoot reached its rupture point after 2 to 4 of bio-yield points. It was supposed that these multiple bio-yield points were caused by the discrete compression of wood parts which are composed of water, nutrient, resin, etc. 2) Required shear force to shear shoot was proportional to the square of shoot diamter, however, shear force for shoots of early harvesting time(Aug. 31) was proportional to the shoot diameter. Variance of shear force was increased as the harvesting time was delayed. Shear forces were distributed from 468N(Aug. 31, 12mm dia) to 4153N(Aug. 31, 26mm dia) disregarding the sampling date. 3) The average shear stresses by sampling dates were 744,822, and 883N/m2, respectively, and for the earlier shoot samples shear stress was quite smaller than the others. Shear stress was proportional to shoot diameter squared, and the effect of shoot diameter on the shear stress was decreased as harvesting time was delayed.

• 한국유기농업학회지
• /
• 제6권1호
• /
• pp.51-61
• /
• 1997

This experiment was carried out to investigate the growth response of 3 grasses to seed coating with chitosan solution and the attempt was made to estimate adequate seed coating concentrations of chitosan solution in each grass for the growth to be stimulated. Three species used in this experiment were orchardgrass, tall fescue and reed canarygrass. Six different seed coating concentrations of chitosan solution were applied as 0%(control), 0.01%, 0.05%, 0.1% and 1.0%, respectively. the results were obtained as follows; 1. Dry weight of tiller(WT), leaf area(LA), dry weight of leaf(LW), dry weight of stem(SW), dry weight of shoot(SHW), biological yield(BY) and C/F ratio were significantly different between species. 2. Number of tillers per plant(NT), dry weight of tiller(WT), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW), biological yield(BY) and T/R ration were significantly different between seed coating concentrations of chitosan solution. 3. The adequate seed coating concentrations of chitosan solution for the growth stimulating effect were different between species. The highest values of yield components and dry weight of plant parts were obtained at 1% in orchardgrass and tall fescue, and 0.05% in reed canarygrass, respectively. 4. Growth stimulating effect of seed coating in each species were different. The highest values were obtained in leaf area(LA), dry weight of leaf(LW), dry weight of root(RW), dry weight of shoot(SHW) and dry weight of biological yield(BY) in orchardgrass. The values of dry weight of stem(SW) and C/F ration were highest in reed canarygrass. 5. An increase in number of tillers per plant(NT), dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in dry weight of shoot(SHW). Among the aboved increasing factors, the dry weight of leaf(LW) was a main factor for the increase in dry weight of shoot(SHW). 6. An increase in dry weight of leaf(LW), dry weight of stem(SW) and dry weight of root(RW) according to seed coating was attributed to the increase in biological yield(BY). Both the dry weight of leaf(LW) and dry weight of root(RW) were main factors for the increase in biological yield(BY).

• 한국초지조사료학회지
• /
• 제12권1호
• /
• pp.6-11
• /
• 1992

This experiment was carried out to study the biological yields(BY) of varieties by the developmental growth stages and shoot weight(SHW), leaf area(LA), root dry weight(RW), number of tillers(NT), shoot and root ratio(S/R), weight of a tiller(WT) as factors of yield components with 5 varieties of perennial ryegrass. The results are summarized as follows; 1. The biological yields in summer were about 115 of spring yield. 2. The biological yields of Manhattan were the highest until1 third developmental growth stage among perennial ryegrasses, and those for Maprima and P-2 varieties were the highest in the following stages. In terms of shoot dry weight, the similarly tendency appeared in the fifth developmental growth stage. 3. The shoot dry weight increased highly with the root dry weight. 4. The Tempo variety of biological yield was generally low but the weight of a tiller was the highest. 5. The highest increasing stage of biological yields was between fifth and sixth developmental growth stage, but the lowest increasing stage of biological yields was between first and second developmental growth stage, respectively. The dominant factors of biological yields were influenced to shoot and root dry weight.

• 한국작물학회지
• /
• 제49권5호
• /
• pp.394-406
• /
• 2004

A split-plot designed experiment including four rice varieties and 10 nitrogen levels was conducted in 2003 at the Experimental Farm of Seoul National University, Suwon, Korea. Before heading, hyperspectral canopy reflectance (300-1100nm with 1.55nm step) and nine crop variables such as shoot fresh weight (SFW), leaf area index, leaf dry weight, shoot dry weight, leaf N concentration, shoot N concentration, leaf N density, shoot N density and N nutrition index were measured at 54 and 72 days after transplanting. Grain yield, total number of spikelets, number of filled spikelets and 1000-grain weight were measured at harvest. 14,635 narrow-band NDVIs as combinations of reflectances at wavelength ${\lambda}l\;and\;{\lambda}2$ were correlated to the nine crop variables. One NDVI with the highest correlation coefficient with a given crop variable was selected as the NDVI of the best fit for this crop variable. As expected, models to predict crop variables before heading using the NDVI of the best fit had higher $r^2$ (>10\%)$ than those using common broad- band NDVI red or NDVI green. The models with the narrow-band NDVI of the best fit overcame broad- band NDVI saturation at high LAI values as frequently reported. Models using NDVIs of the best fit at booting showed higher predictive capacity for yield and yield component than models using crop variables.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.816-824
• /
• 2006

This study was conducted to evaluate the shoot height at which the yield and nutritive value of wormwood (Artemisia montana) is optimized in order to provide information on its potential to support animal production (Experiment 1). A second objective was to determine how the essential oil (EO) concentration in wormwood hay and silage differ (Experiment 2). In Experiment 1, Artemisia montana was harvested at five different shoot heights (20, 40, 60, 80 and 100 cm) from triplicate $1.8{\times}1.8m$ plots. Dry matter (DM) yield was measured at each harvest date and the harvested wormwood was botanically separated into leaf, stalk and whole plant fractions and analyzed for chemical composition and in vitro dry matter digestibility (DMD). Values for total digestible nutrients (TDN), digestible energy (DE) and metabolizable energy (ME) were subsequently calculated using prediction equations. Dry matter yields of stalk and whole plant increased linearly (p<0.001) and leaf yield increased quadratically (p<0.01) with shoot height, whereas the leaf/stalk ratio decreased linearly (p<0.001). As shoot height increased, there was a linear increase (p<0.001) in leaf DM, ether extract (EE) and neutral detergent fiber (NDF) contents and a quadratic increase (p<0.05) in leaf acid detergent fiber (ADF) and nitrogen free extract (NFE) contents, and stalk and whole plant DM (p<0.001), organic matter (OM, p<0.01 and p<0.05), NDF (p<0.001 and 0.05) and NFE (p<0.05) contents. However, there were decreases in leaf crude protein content (CP, quadratic, p<0.001) and stalk and whole plant EE content (linear, p<0.001), CP (quadratic, p<0.05) and ash (quadratic, p<0.05) contents. Digestibility of DM and TDN, and DE and ME value in leaves were not affected by increasing shoot height, but these measures linearly decreased (p<0.001) in stalk and whole plant. In Experiment 2, the hay had higher DM and CP concentrations, but lower EE concentration than the silage. Essential oil (EO) content in wormwood silage (0.49 g/100 g DM) was higher (p<0.05) than that in wormwood hay (0.32 g/100 g DM). Wormwood hay contained 25 essentail oils (EO) including camphor (10.4 g/100 g), 1-borneol (11.6 g/100 g) and caryophyllene oxide (27.7 g/100 g), and wormwood silage had 26 EO constituents including 3-cyclohexen-1-ol (8.1 g/100 g), trans-caryophyllene (8.6 g/100 g) and ${\gamma}$-selinene (16.8 g/100 g). It is concluded that the most ideal shoot height for harvesting wormwood is 60 cm based on the optimization of DM yield and nutritive value. Wormwood silage had a greater quantity and array of EO than wormwood hay.