• 한국의류산업학회지
• /
• 제22권3호
• /
• pp.378-385
• /
• 2020

The purpose of this study was to present basic data for development of shoe last suitable for women of plus size (BMI 25 kg/㎡ or higher) by type and to analyze the characteristics of each type of foot type. The results of the study are as follows. A comparison of the feet of a plus-size woman and a normal-weight woman showed that the feet of a plussize woman were thicker and wider in the toes, cheeks and feet than those of a normal-weight woman, while the ankle area was thicker. As a result of the cluster analysis by type of foot type of plus-size woman, type 1 was classified into four types, type 1 was 49 (19.5%), type 2 was 43 (17.1%), type 3 was 53 (21.1%), and type 4 was distributed among 106 (42.2%). Type 1 appeared to be a long, low heel, thick foot and wide H-type, and Type 2 appeared to be a D-type with a low heel and a thinner and narrow foot compared to other types, but with wide outer width of the foot. Type 3 showed short feet, low heels, narrow feet, but slanted sides, and Type 4 showed type A with long feet, high heels, thick and wide feet or a combination of toes.

• 한국의류산업학회지
• /
• 제25권1호
• /
• pp.52-61
• /
• 2023

This study aimed to present data for the development of a shoe which is suitable for plus-size men (BMI 25kg/m² or higher) and to analyze the characteristics of each type of foot. The results of the study are as follows. To assess foot shape in relation to weight gain, participants were categorized into normal weight, overweight, and obese weight groups, according to their BMI indexes. Those in the normal weight group exhibited a smaller value than the overweight or obese weight group in all items. As a result of the cluster analysis, by type of foot, of the obese men category, men were classified into four BMI index groups: members of the type 1 group had a BMI index of 157 (18.4% of total sample), while for type 2 the figure was 213 (25.0% of sample), for type 3 it was 259 (30.4%), and for type 4 it stood at 224 (26.3% of total sample). Those from the type 1 group had thin ankles with narrow toes and flattened sides. Type 2 group members had thick ankles with well-developed outer feet and thick sides. Those within the type 3 group had medium-thick ankles with narrow feet but wide inner feet. Finally, those in the type 4 group had feet with a slanted side, as well as thick ankles, wide feet, and flat sides. Among these categories, the type 3 group members indicated the highest distribution.

• 복식문화연구
• /
• 제7권2호
• /
• pp.230-241
• /
• 1999

The purpose of this study is to classify frequency of advertisement and types of advertisement by items and to analyze a primary factors were factors were reflected in the costumes by a policy of rule under the Japanese rule. Data was MaIl Shin Bo\`s advertisement connected with costumes from 1910 to 1945 years. The results are as follows : 1. The order of the advertisement\`s frequency was footwear, cosmetics, soap[, headgear, western style clothes, precious metals and so on. 2. The type of the advertisement was a format that transmits informs in all items. Cosmetics, hairdye and shampoo applied positive appeals. 3. In the military government, the advertisement\`s frequency connected with costumes was 37.5% and a shoe store was the first order. A shoes and headgear were high level, because of these were essential imports and were allowded as a proper articles for a western style clothes by a civilized policy. In the political periods of civilization, the advertisement\`s frequency connected with costumes was 54%. This result indicates industrial development of this period. Soap was the first order during 1924∼1933 and cosmetics was the first order during 1934∼1940. High level of the advertisement\`s frequency in these imports were reflected by a cultural policy as a link of an appeasement measure In the political periods of a racial liquidation, the advertisement\`s frequency connected with costumes was 8.5% and the advertisement\`s order by items was cosmetics, a shoe store. The reason was that reflected the phases of the times that was serious by a shortage of goods and an reinforcement of wartime\`s attitudes throughout war.

• 한국운동역학회지
• /
• 제18권4호
• /
• pp.89-97
• /
• 2008

본 연구의 목적은 테니스화의 종류에 따른 주행 특성 및 테니스 동작 수행 시 족저압력분석 방법을 활용하여 테니스화의 기능성을 평가하는데 있다. 하지의 상해가 없고 정상적인 보행동작을 수행하는 남자 대학생 10명을 선정하여 4종류 모델의 테니스화를 대상으로 직선주행, $45^{\circ}$ 방향전환주행, 포핸드 스트로그, 백핸드 스트로그 동작 시 족저압력을 측정한 후 COP(renter of pressure)경로, 평균족저압력, 최대족저압력, 최대지면반력을 분석하였다. 분석결과 직선달리기 동작 시 족저압력 분석결과 모든 제품이 우수한 것으로 분석되었고 통계적으로 유의미한 차이는 없었으며, $45^{\circ}$ 방향전환달리기동작, 포핸드 스트로그동작, 백핸드 스트로그 동작 시 최대지면반력과 최대족저압력 그리고 평균족저압력을 종합적으로 분석해 본 결과 통계적으로 유의미한 차이는 없었으나, C>A>B>D> 순으로 테니스화의 기능성이 우수한 것으로 분석되었다.

• 한국정밀공학회지
• /
• 제30권4호
• /
• pp.442-449
• /
• 2013

This study was to compare a domestic comfort shoes to the popular import(SAS$^{(R)}$) to gain a better understanding in biomechanical characteristics for shoe design for the elderly. For each shoe type, morphologic dimensions, shock absorption, and flexibility were assessed. From subjects(n = 20, $72.4{\pm}5.5$ years, $67.7{\pm}7.9$ kg), mean peak pressure(MPP) and contact area(CA) at the plantar surface were analyzed. The domestic shoes reflecting anatomic contour of the plantar surfaces of Asians resulted in wider CA(by 30.4 $cm^2$), higher shock absorption(by 2.4%) and stiffness(by 0.5 N/mm) than the import. With the domestic shoes, significantly less MPPs were found at the forefoot(by 42~49%) regions(p < .05) and higher CA was noted additionally at hallux and lessor toes(by 26~63%). More anatomically-contoured insole and favorable mechanical characteristics may help reduce the plantar pressures more effectively and more evenly, especially across the central forefoot and midfoot regions of the plantar surface, especially for the design of the comfort shoes for the elderly.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.1-7
• /
• 2005

Excessive pronation and impact force during running are related to various running injuries. To prevent these injuries, three type of running shoes are used, such as cushioning, stability, and motion control. Although there were may studies about the effect of midsole hardness on impact force, no study to investigate biomechanical effect of motion control running shoes. The purpose of this study was to determine biomechanical difference between cushioning and motion control shoes during treadmill running. Specifically, plantar and rearfoot motion, impact force and loading rate, and insole pressure distribution were quantified and compared. Twenty male healthy runners experienced at treadmill running participated in this study. When they ran on treadmill at 3.83 m/s. Kinematic data were collected using a Motion Analysis eight video camera system at 240 Hz. Impact force and pressure distribution data under the heel of right foot were collected with a Pedar pressure insole system with 26 sensors at 360 Hz. Mean value of ten consecutive steps was calculated for kinematics and kinetics. A dependent paired t-test was used to compare the running shoes effect (p=0.05). For most kinematics, motion control running shoes reduced the range of rearfoot motion compared to cushioning shoes. Runners wearing motion control shoe showed less eversion angle during standing less inversion angle at heel strike, and slower eversion velocity. For kinetics, cushioning shoes has the effect to reduce impact on foot obviously. Runners wearing cushioning shoes showed less impact force and loading rate, and less peak insole pressure. For both shoes, there was greater load on the medial part of heel compared to lateral part. For pressure distribution, runners with cushioning shoes showed lower, especially on the medial heel.

• 한국의류산업학회지
• /
• 제23권3호
• /
• pp.390-405
• /
• 2021

Gait analysis trackers have been developed to monitor daily gait patterns to improve users' running performance and reduce the risk of injuries. A variety of gait analysis trackers are available on the market(e.g., foot pods, insoles). Depending on the type of gait analysis tracker, users' discomfort or satisfaction as well as required properties may differ. Hence, the purpose of this study was to compare and analyze user experience of three different types of commercial shoe-mounted gait analysis trackers and their mobile applications in a laboratory environment using questionnaires based on actual experiences of each product. Ten males and ten females who regularly enjoy walking and running exercises participated in the experiment. After the participants set up the tracker and application themselves without support from researchers, ten to thirty minutes' exercise was permitted on each product. Following this, the participants answered questionnaires containing evaluation variables on the device and mobile application, as well as satisfaction, intention to use, recommendation, and purchase. In addition, they were asked questions about the attractive features and shortcomings of each device and application. The results showed that the PRO-SPECS^® smart insole was preferred over the others for ease of use, perceived durability, psychological burden of the design, and usefulness of the information provided by the application. Along with the results of questionnaire, this study also discussed strategies and recommendations for future product design and development.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3833-3838
• /
• 2009

본 논문은 산업용 로봇을 이용하여 운동화의 특성을 측정하는 측정장비를 소개한다. 여기서 사용된 로봇은 6관절의 퓨마타입 로봇(삼성전자의 FARA AT2 모델)을 인간의 보행 동작을 구현할 수 있도록 보완하였다. 보행 동작은 고속카메라로 분석한 후, 로봇 관절각들을 추출하여 동작구현에 사용한다. 3가지 종류의 경도 아웃솔(신발 겉창)로 만들어진 신발 시편을 준비하고, 이 로봇 시스템을 이용하여 걸음동작을 구현하여 신발에 따른 지면 충격력을 측정한다. 걸음동작에서 발생하는 발 앞축 부분을 굽히기 위해 요구되는 굽힘 모멘트의 측정과 걸음동작에서 발생하는 요동현상의 측정에 사용한다. 동일한 압축변형을 유지하도록 시스템을 설정하고, 신발을 측정한 결과 아웃솔의 경도에 따라 지면반력의 크기는 선형적으로 증가하는 추세가 관찰되었다. 또한 굽힘 모멘트와 요동현상 역시 아웃솔의 경도에 따라 선형적으로 증가하는 추세가 관찰되었다. 상기의 몇 가지 실험을 통하여, 본 로봇 시스템은 일관성 있는 실험결과를 제공하였으며, 따라서 산업용 로봇을 이용하여 신발의 유용한 특성 정보 도출이 가능하며, 추후 신발설계의 활용에 대한 가능성을 보여준다.

• 콘크리트학회논문집
• /
• 제19권5호
• /
• pp.623-630
• /
• 2007

주로 교량 슈 (shoe)나 기계 기초 등과 하부 콘크리트 구조체간의 공극을 충전시켜 상부 구조물과 하부 구조물을 일체화하는데 사용되는 그라우트재는 구조물의 특성상 주로 큰 하중을 받는 부위에 시공되기 때문에 높은 압축강도를 갖는 제품 위주로 개발 사용되어 왔다. 그러나 고강성 위주로 제품이 개발되어 한계응력 이상에서는 구조체가 갑자기 파괴되는 취성체라는 구조적 문제점을 안고 있고, 연속 및 반복하중 등의 응력에 의한 누적 피로에 의해 균열 등의 성능 저하 현상이 발생할 수 있다 또한, 초기 고강도를 유지하기 위해 발열 특성이 높은 속경성 재료를 과다하게 사용함으로써 대형 부재인 경우 수화열 등에 의한 균열발생 우려의 문제 등도 안고 있다. 본 연구는 이와 같은 문제들을 개선하기 위해, 탄성재료인 분말 폐타이어 및 분말 수지를 이용하여 기존의 고유동, 무수축, 고강도 특성 이외에 고인성과 고내구성을 부여하여 보다 안정적으로 시공될 수 있으며, 모체와의 일체성을 향상시키기 위한 그라우트재의 분체 조성물을 개발하였다 또한, 부수적으로 분말 폐타이어 및 플라이애쉬와 같은 산업폐기물을 재활용할 수 있도록 하여 환경친화적인 건설 재료를 제공하는 데에도 기여하였다. 이를 위해 총 7가지 배합 조건별 실험이 진행되었고, 이를 통해 최적 배합 조건을 선정하였다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2001년도 춘계학술대회 논문집
• /
• pp.262-270
• /
• 2001

본 연구의 목표는 새로 개발된 구두골을 평가하여 보다 편리하고 기능성이 향상된 구두를 제작할 수 있는 한국형 구두골(shoelast)을 설계하는 것이다. 구두의 적합성에 영향을 주는 인자를 찾아내고, 이들에 대한 평가 방법을 개발하여 인간공학 실험을 실시하였다. 새로 개발한 구두골은 남.여 각각 2 개의 타입(type)으로 10 명의 평가자에 의하여 단기간 (1 주일)의 착화감 평가가 이루어졌다. 인체측정치와 발 부위의 상관성 평가, 피험자 각각에 대한 시계열분석의 결과를 종합하여 두 타입의 구두골에 대한 문제점을 파악하고, 그 개선점을 도출하였다. 이 결과를 바탕으로 한국형 구두골(shoelast) 설계 치수를 설정하였다. 본 연구에서는 얻어진 결과는 구두 제작 공정에 직접 사용될 수 있으며, 구두의 쾌적성 및 기능성 향상에 크게 기여할 것으로 기대한다.