• 한국항공우주학회지
• /
• 제36권9호
• /
• pp.923-928
• /
• 2008

파이로 충격은 고주파 영역까지 큰 가속도가 유발되는 천이 진동 현상으로 발사체에서는 주로 화약에 의한 분리 장치의 작동에 의해 발생하게 된다. 일반적인 발사체의 경우 단 분리, 페어링 분리, 위성 분리 이벤트에서 파이로 충격이 발생하게 되는데 이에 의해 위성 또는 발사체의 전자 장비가 비정상적인 기능을 보이거나 작동 불능 상태가 될 수 있다. 본 논문에서는 이러한 파이로 충격의 절연을 위해 와이어메쉬 절연계를 소개하였고 동일 단면을 기준으로 밀도와 높이를 다르게 9 종류를 제작하였다. 와이어메쉬 절연계의 전형적인 특성을 살펴보기 위해 기본적인 압축 시험을 수행하였고 더미 질량을 이용하여 파이로 충격 시험을 수행, 충격 절연 효과가 뛰어남을 검증하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권4호
• /
• pp.602-613
• /
• 2015

As one of the mission payloads to be verified through the cube satellite mission of Cube Laboratory for Space Technology Experimental Project (STEP Cube Lab), we developed a hinge driving separation nut-type holding and releasing mechanism. The mechanism offers advantages, such as a large holding capacity and negligible induced shock, although its activation principle is based on a nylon cable cutting mechanism triggered by a nichrome burn wire generally used for cube satellite applications for the purpose of holding and releasing onboard appendages owing to its simplicity and low cost. The basic characteristics of the mechanism have been measured through a release function test, static load test under qualification temperature limits, and shock measurement test. In addition, the structural safety and operational functionality of the mechanism module under launch and on-orbit environments have been successfully demonstrated through a vibration test and thermal vacuum test.

• 대한기계학회논문집A
• /
• 제34권7호
• /
• pp.943-946
• /
• 2010

본 연구에서는 소형자전거의 핸들에 적용할 수 있는 전방 서스펜션을 제안하고 시뮬레이션을 통해 충격흡수 성능을 평가하였다. 서스펜션이 없는 경우, 기존의 전방포크서스펜션이 장착된 경우 그리고 제안된 핸들서스펜션이 장착된 경우 등 3가지 서스펜션 종류에 대해 인체모델을 이용한 주행시뮬레이션을 수행하여 각각의 완충성능을 비교평가 하였다. 시뮬레이션 결과 제안된 핸들 서스펜션의 경우 손과 머리에 전달된 가속도가 기존의 전방포크서스펜션이 장착된 경우보다 크게 측정되었지만 서스펜션이 없는 자전거의 경우보다는 현저히 작게 측정되었다. 이 같은 결과는 제안된 핸들 서스펜션이 상당한 완충 성능을 보여주었으며 이는 경량화가 중요한 소형자전거에 적용이 가능할 것으로 보인다.

• 수산해양기술연구
• /
• 제32권3호
• /
• pp.302-309
• /
• 1996

Cavitation erosion-corrosion implies damage to materials due to the shock pressure or shock wave that results when bubbles form and collapse at a metal surface within a liquid. If the liquids corrosive to the material, a condition typically encountered in industry, the component materials may suffer serious damage by a combination of mechanical and electrochemical attack. To suppress cavitation erosion as well as cavitation erosion-corrosion to hydraulic equipments, innovations such as the improvement in the geometric design of the equipment or the selection of suitably resistant construction materials are necessary. This study was tested by using the piezoelectric vibrator with 20kHz, 24${\mu}$m for cavitation generation. And also, the vibratory cavitation erosion-corrosion tests on commercial mild steel SS41were carried out. We carefully observed the erosion pattern and surface photography. The geometrical mechanism of pit growth, which is to be likely these processing; shallow typelongrightarrowundercut typelongrightarrowwide shallow type.

• 전기학회논문지
• /
• 제66권7호
• /
• pp.1155-1161
• /
• 2017

This study examines environmental performance of the arcing measurement module according to international standards. The module assesses the collected current performance using a computer system. The module is required to assess environmental impact resulting from electromagnetic waves, shock and temperature change during train operation. The test includes testing EMI/EMC, vibration, shock and temperature cycling for interface between trains and the arcing measurement module. The module test items were determined in compliance with the standards suggested by the International Electrotechnical Commission (IEC) and Europaische Norm (EN). This study describes the method of test, test equipment operation and how to choose relevant performance standards. The analysis and test results of environmental performance for the module based on computer system are described in this study.

• 한국포장학회지
• /
• 제27권2호
• /
• pp.109-114
• /
• 2021

The characteristics of vibrational stress (shock and vibration) during transport and the possibility of damage to the packaged pears by functional PLA tray were investigated. And this study was conducted to analyze how environmental conditions by simulated transport environment affect quality factors such as weight loss (%) and soluble solid content (SSC, %), and firmness (bioyield strength, kPa) of packaged pears by PLA tray and Expanded PET foam pad (Group 1), EPE cushion cup pad and net (Group 2) for exporting. Pears with or without vibration stress were stored for 30 days at low temperatures (5 ± 0.8℃, 80 ± 5% relative humidity). There was the statistically significant difference (p ≤ 0.05) between pears with and without vibration stress for weight loss, soluble solid content, and firmness (bioyield strength) after 30 days storage. Vibration stress accelerated pear quality deterioration during storage, resulting in increased weight loss, soluble solids content, and reduced hardness. The firmness (bioyield strength) and weight changes of pears with PLA trays were smaller than those of conventional packaging box systems. It was determined that the firmness of agricultural products was a quality factor closely related to the storage period and that PLA could be applied.

• 한국포장학회지
• /
• 제13권1호
• /
• pp.19-23
• /
• 2007

Shock and vibration inputs are transmitted from the transporting vehicle through the packaging to the fruit. The vibration causes sustained bouncing of fruits against each other and the container wall. The steady state vibration input may cause serous fruit injury, and the damage is particularly severe if the fruits are bounced at its resonance frequency. The determination of the resonance frequencies of the fruits and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruits, and to understand the complex interaction between the components of the fruits when they relate to expected transportation vibration inputs. To analyze the vibration properties of the apples for optimum packaging design during transportation, random vibration tests were carried out. In the random vibration test, the resonance frequency and PSD of the packaged freight of apples in the test were in the range of 82 to 97 Hz and 0.0013 to $0.0021G^2/Hz$ respectively and the resonance frequency and PSD of the packaged apples in the test were in the range of 13 to 71 Hz and 0.0143 to $0.0923G^2/Hz$.

• 전기학회논문지
• /
• 제65권6호
• /
• pp.1038-1044
• /
• 2016

In this paper, a SDINS(Strapdown Inertial Navigation System) rapid initial alignment technique robust to the pyro-shock in multi-launch rocket system is proposed. The proposed method consists of three steps. Firth, transfer alignment is performed to estimate misalignment between MINS(Master INS) and SINS(Slave INS), and the estimated misalignment is written in the memory when transfer alignment is completed. Next, the pre-filtering process is performed to get rid of the acceleration error induced by launcher vibration. Finally, the horizontal alignment is performed to compensate misalignment variation caused by pyro-shock. We verified the performance of the proposed alignment method comparing with the conventional transfer alignment method. The simulation shows that the proposed initial alignment technique improves alignment performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제10권3호
• /
• pp.94-106
• /
• 1986

Since the oil shock of '70s the engine makers have developed new types of diesel engine with low fuel consumption. There is an obvious tendency towards the use of poorer quality fuels, such as the residual oil from chemical processes of refinery. The shaft driving generators is also widely adopted on behalf of the auxiliary diesel engines, which are driving on the expensive diesel oil and have high fuel oil consumption rates, and some mania propulsion diesel engines are equipped with reduction gear systems to get better propulsive efficiency by slower propeller revolutions. The propulsion shafting system equipped with the shaft driving generator or the geared diesel engine shafting system has flexible couplings, and it requires extensive investigations of the torsional vibration and torque fluctuation in order to ensure the acceptable operation range in service. The characteristics of misfiring must be especially examined for the high viscosity fuels to be used. Both torsional vibration and fluctuating torque resulted from misfiring, should be examined for thier effects on the flexible coupling and propulsion shafting system. This paper is to investigate and solve the above mentioned problems which must be predicted on the design-stage of marine propulsion shafting system. A computer program is developed to calculate the indicated diagram, fluctating torque and torsional vibration for both normal and misfiring conditions.

• 터널과지하공간
• /
• 제17권3호
• /
• pp.216-224
• /
• 2007

화약의 동적 충격에너지를 이용하는 발파굴착은 매우 효율적인 터널굴착방법이다. 그러나 진동과 암소음 등의 발파공해가 발생하는 문제점이 있다. 최근 연구를 통해 노치공을 이용한 선균열 암굴착방법은 발파공해와 터널의 여굴을 상당히 줄일 수 있는 것으로 확인되었고 이에 따라 본 연구에서는 노치발파공의 성형을 위한 노치장비개발에 관한 연구를 수행하였다. 노치공을 효율적으로 성형하기 위해 노치비트의 길이, 높이 등을 다양하게 변화시켜 실험을 수행하여 최적화하였고, 천공속도, 천공정밀도를 높이기 위한 천공비트, 노치비트, 아답타, 노치 가이드로 이루어진 노치비트 시스템을 개발하였다.